FIELD MANUFACTURING
Review of Automotive Reglazing unit standards 22348-22351 and 22353
|
Subfield |
Domain |
Id |
|
Glass and Glazing |
Automotive Reglazing |
22348-22351, 22353 |
The Joinery Industry Training Organisation has completed the review of the unit standards listed above.
Date new versions published November 2009
Planned review date December 2014
Summary of review and consultation process
On the 17 June 2009 the Advisory Group met to discuss the Automotive Reglazing unit standards and qualification. The Advisory Group was comprised of industry representatives, provider representatives and representatives from NZ Motor Industry Training Organisation. The unit standards were discussed and changes suggested as well as the development of four new standards to meet identified gaps. Changes were made and endorsed by the Advisory Group in August 2009.
Main changes resulting from the review
· Four new standards were developed.
· A change was made to the title and element one of standard 22351 to refer to the installation of a single side window panel in a van as industry indicated that jobs requiring the installation of multiple side windows did not occur frequently enough in the automotive reglazing industry.
· Changes were made to the title and elements of standard 22353 to include the removal, refitting, and testing of electronic components. As a result the credit value was increased from 3 to 6.
· Credit values of unit standards 22349 and 22351 were increased from 3 to 6 and 4 to 6 respectively to better reflect the evidence collection requirements needed for these standards.
· Credit value of unit standard 22350 decreased from 4 to 2 because feedback from industry indicated that the outcome was less complex than first envisaged.
· Changes were made to special notes to update and clarify the definitions.
· Changes were made to range statements to improve clarity and make them consistent across the domain.
· Changes were made to performance criteria to reflect the change from enterprise to worksite requirements.
Impact on existing provider accreditations
None.
Impact on existing qualifications
Qualifications that contain the reviewed standards or classifications are tabled below.
|
Affected |
The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a C or D category standard |
|
Not materially affected |
The qualification lists a standard that has a new title The qualification lists a standard that has a new classification |
The following Joinery Industry Training Organisation qualification is affected by the outcome of this review and will be reviewed in 2009.
|
Qualification title |
Standard in the qualification |
|
National Certificate in Automotive Reglazing (Level 3) [Ref: 1249] |
22349, 22350, 22351, 22353 |
All changes are in bold.
|
Key to review category |
| |
|
A |
Dates changed, but no other changes are made - the new version of the standard carries the same Id and a new version number | |
|
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same Id and a new version number | |
|
C |
Major changes that necessitate the registration of a replacement standard with a new Id | |
|
D |
Standard will expire and not be replaced | |
Subfield Glass and Glazing
Domain Automotive Reglazing
|
Id |
Title |
Level |
Credit |
Review Category |
|
22348 |
Repair chipped and/or cracked laminated automotive glass Repair chipped and cracked laminated automotive glass |
3 |
4 |
B |
|
22349 |
Remove and install framed automotive glass |
3 |
3 6 |
B |
|
22350 |
Remove and replace glass in automotive rear vision mirrors |
3 |
4 2 |
B |
|
22351 |
Install side windows in a van panel Install a side window panel in a van |
3 |
4 6 |
B |
|
22353 |
Remove, refit and test electrically operated components to facilitate automotive reglazing Remove, refit and test electrical and electronic components to facilitate automotive reglazing |
3 |
3 6 |
B |
|
26078 |
Demonstrate knowledge of quality control standards for automotive reglazing |
3 |
2 |
New |
|
26080 |
Demonstrate knowledge of adhesives and sealants used in automotive reglazing |
3 |
3 |
New |
|
26081 |
Remove and install rubber fitted automotive glass |
3 |
6 |
New |
Domain Flat Glass
|
Id |
Title |
Level |
Credit |
Review Category |
|
26079 |
Make a template for cutting out glass |
3 |
3 |
New |