Field Manufacturing
Review of Manufacturing unit standards
|
Subfield |
Domain |
ID |
|
Solid Wood Manufacturing |
Saw Doctoring |
660, 661, 664, 665, 671, 8338, 15761 |
|
Veneer Slicing Operations |
730-734, 23099-23103 | |
|
Wood Product Manufacturing Skills |
17042, 17044, 17046, 17047, 17049-17053, 17201, 17202, 19375 | |
|
Wood Fibre Manufacturing |
Composite Wood Panel Manufacturing |
708, 710, 7067, 7069-7072, 16341 |
The Forest Industries Training and Education Council (FITEC) has completed the review of the unit standards listed above.
Date report published April 2010
Summary
As these unit standards have had almost no usage over the last four years, they were reviewed with a view to designate them as expiring. Feedback and consultation undertaken with the industry through sector operating committees and accredited providers confirmed and endorsed the intent of the review.
Main changes
· All unit standards in this review have been designated as expiring and will not be replaced.
· The Veneer Slicing Operations domain has been designated expiring (lapsing) and will expire with the unit standards in December 2014.
Category D unit standards will expire at the end of December 2014
Impact on existing accreditations
Accredited providers can continue to assess against these unit standard up until December 2014.
Impact on Accreditation and Moderation Action Plan (AMAP)
None.
Impact on registered qualifications
|
Key to type of impact | |
|
Affected |
The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a C or D category standard |
|
Not materially affected |
The qualification lists a standard that has a new title The qualification lists a standard that has a new classification |
The following FITEC qualifications are impacted by the outcome of this review and will be updated when they are reviewed or revised in 2011.
|
Qualification Title and Reference |
ID |
|
National Certificate in Saw Doctoring (Saw and Tool Maintenance) (Level 3) [Ref: 0810] |
660, 661, 664, 665, 8338, 15761 |
|
National Certificate in Solid Wood Manufacturing (Level 3) with strands in Engineered Wood Product Operations, Laminated Veneer Lumber (LVL) and Plywood Operations, Planer Operations, Pole and Post Operations, Saw Centre Operations, Timber Drying Operations, Timber Grading Operations, Timber Treatment Operations, Veneer Preparation, Wood Product Operations, and Wood Process Operations [Ref: 1306] |
17042, 17044, 17046, 17047, 17049-17053, 17201, 17202, 19375 |
|
National Certificate in Wood Fibre Manufacturing (Level 3) with strands in Composite Panel Preparation, Composite Panel Forming and Pressing, Composite Panel Finishing, Mechanical Pulping Operations, Pulp and Paper Dry End Operations, Pulp and Paper Wet End Operations, and Overlay Bonding Operations [Ref: 1309] |
708, 710, 7067, 7069-7072, 17044 |
|
National Certificate in Wood Fibre Manufacturing (Advanced) (Level 4) with strands in Composite Panel Manufacturing, Paper Making, Mechanical Pulp Making, and Overlay Bonding [Ref: 1310] |
16341 |
|
National Certificate in Wood Manufacturing Foundation Skills (Level 2) with strands in Solid Wood Manufacturing, Sliced Veneer Operations, Technical Awareness, Wood Handling and Distribution, Wood Panel Manufacturing, and Wood Product Manufacturing [Ref: 1305] |
730-734, 23099-23103 |
The following table identifies a qualification developed by another SSB that is impacted by the outcome of this review. The SSB has been advised that the qualification requires revision. The standard listed has generated the status Affected.
|
Ref |
Qualification Title |
ID |
SSB Name |
|
1468 |
National Certificate in Agriculture (General Skills) |
664 |
Agriculture Industry Training Organisation |
Detailed list of unit standards - classification, title, level, and credits
All changes are in bold.
|
Key to review category | |
|
A |
Dates changed, but no other changes are made - the new version of the standard carries the same ID and a new version number |
|
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same ID and a new version number |
|
C |
Major changes that necessitate the registration of a replacement standard with a new ID |
|
D |
Standard will expire and not be replaced |
Manufacturing > Solid Wood Manufacturing > Saw Doctoring
|
ID |
Title |
Level |
Credit |
Review Category |
|
660 |
Maintain handsaws |
3 |
10 |
D |
|
661 |
Maintain narrow bandsaws |
3 |
3 |
D |
|
664 |
Maintain a chainsaw chain and bar |
2 |
3 |
D |
|
665 |
Maintain metal cutting saw |
3 |
10 |
D |
|
671 |
Maintain and align frame saw centre |
4 |
20 |
D |
|
8338 |
Retooth inserted teeth saws |
3 |
3 |
D |
|
15761 |
Tooth bandsaws |
3 |
5 |
D |
Manufacturing > Solid Wood Manufacturing > Veneer Slicing Operations
|
ID |
Title |
Level |
Credit |
Review Category |
|
730 |
Condition logs for slicing into veneers |
3 |
7 |
D |
|
731 |
Slice logs into veneer leaves |
3 |
10 |
D |
|
732 |
Clip and grade veneers |
3 |
10 |
D |
|
733 |
Cut and glue veneer leaves |
3 |
10 |
D |
|
734 |
Make layons from veneer leaves |
3 |
10 |
D |
|
23099 |
Cut logs for veneer slicing |
3 |
7 |
D |
|
23100 |
Rip logs to size in preparation for veneer slicing |
3 |
7 |
D |
|
23101 |
Dry wood veneer leaves |
3 |
10 |
D |
|
23102 |
Guillotine veneer leaves |
3 |
7 |
D |
|
23103 |
Repair veneer layons |
3 |
7 |
D |
Manufacturing > Solid Wood Manufacturing > Wood Product Manufacturing Skills
|
ID |
Title |
Level |
Credit |
Review Category |
|
17042 |
Set up mortise and tenoner for wood product manufacturing |
4 |
5 |
D |
|
17044 |
Set up sanding machines for wood product manufacturing |
4 |
3 |
D |
|
17046 |
Set up and prepare lathe for wood product manufacturing |
4 |
5 |
D |
|
17047 |
Set up and prepare drilling and boring machinery for wood product manufacturing |
4 |
3 |
D |
|
17049 |
Produce components using drilling and boring machinery in wood product manufacturing |
3 |
3 |
D |
|
17050 |
Produce components using an overhead router in wood product manufacturing |
4 |
5 |
D |
|
17051 |
Produce components using an edge-bander in wood product manufacturing |
4 |
3 |
D |
|
17052 |
Produce components using mortise and tenoner in wood product manufacturing |
3 |
3 |
D |
|
17053 |
Produce components using a spindle moulder in wood product manufacturing |
4 |
10 |
D |
|
17201 |
Produce components using a thicknesser and overhand planer in wood product manufacturing |
3 |
5 |
D |
|
17202 |
Assemble wood product components for wood product manufacturing |
3 |
5 |
D |
|
19375 |
Manufacture and assemble cable drums |
3 |
5 |
D |
Manufacturing > Wood Fibre Manufacturing > Composite Wood Panel Manufacturing
|
ID |
Title |
Level |
Credit |
Review Category |
|
708 |
Prepare wood furnish for hardboard and insulating board manufacture |
4 |
20 |
D |
|
710 |
Form and trim wood furnish for hardboard and insulating board manufacture |
4 |
20 |
D |
|
7067 |
Emboss insulating board panels |
3 |
5 |
D |
|
7069 |
Manufacture pegboard from hardboard panels |
3 |
5 |
D |
|
7070 |
Manufacture acoustic insulating board panels |
2 |
3 |
D |
|
7071 |
Prepare and profile insulating board ceiling tiles |
4 |
10 |
D |
|
7072 |
Finish and package insulating board ceiling tiles |
3 |
5 |
D |
|
16341 |
Manage bonding processes for hardboard manufacture |
4 |
10 |
D |