FIELD MANUFACTURING
Review of Flat Glass unit standards
Subfield |
Domain |
Id |
Glass and Glazing |
Flat Glass |
2043, 2045, 2046, 2048, 2049, 2054, 2057, 2058, 2060, 2062, 20491-20522 |
The Joinery Industry Training Organisation has completed the review of the unit standards listed above.
Date new versions published May 2010
Planned review date December 2014
Summary of review and consultation process
An Advisory Group meeting was held on 8 April 2009 for glazing and 2 June 2009 for glass processing. The participants included industry and provider representatives. The standards specific to each industry were discussed to decide whether they were still fit for purpose and what changes were required. Feedback from the assessment and moderation process was also discussed. Amendments were made to the unit standards and they were endorsed in July 2009.
Main changes resulting from the review
· Six standards were designated expiring and will not be replaced as the processes are no longer carried out by the industry.
· Six new standards were developed to cover new skills and knowledge required by the industry.
· Standard 26485 replaced standard 2060.
· Standard 26283 replaced standards 20496 and 20503.
· Titles were amended to reflect changes to the content.
· Levels and credits were amended to reflect the scope of the task being undertaken and the time involved in collecting evidence for assessment based on feedback from assessors and moderators and changes to industry practice.
· Special notes were updated.
· Elements and performance criteria were amended for consistency and to reflect updated industry practices.
· Prerequisites were removed as they were no longer considered necessary.
Unit standards categorised as category C and D expire at the end of December 2011.
Impact on existing provider accreditations
Current Accreditation for |
Accreditation extended to | ||||
Nature of accreditation |
Classification |
Level |
Nature of accreditation |
Id |
Level |
Subfield |
Glass and Glazing |
2 |
Standards |
26283, 26485 |
3 |
Domain |
Flat Glass |
2 |
Impact on Accreditation and Moderation Action Plan (AMAP)
AMAP 0073 has been updated to reflect the changes made to the standards.
Impact on existing qualifications
Qualifications that contain the reviewed standards are tabled below.
Affected |
The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a C or D category standard |
Not materially affected |
The qualification lists a standard that has a new title The qualification lists a standard that has a new classification |
The following Joinery ITO qualifications are affected by the outcome of this review and will be reviewed in 2009. Unit standards in bold have generated the Affected status.
Qualification title |
Standard in the qualification |
National Certificate in Glass Processing with an optional strand in Extended Glass Processing Skills [Ref: 1103] |
2054, 2060, 20491, 20492, 20493, 20494, 20495, 20496, 20498, 20500, 20501, 20502, 20503, 20505, 20506, 20507, 20508, 20509, 20510, 20513, 20514, 20522 |
National Certificate in Glazing (Level 4) [Ref: 1104] |
2043, 2045, 2046, 2049, 2057, 2058, 20496, 20498, 20504, 20507, 20508, 20515, 20517, 20521, 20522, 20516, 20518 |
National Certificate in Automotive Reglazing (Level 3) [Ref: 1249] |
20492, 20498, 20503 |
The following qualifications are also affected by the outcome of this review. The standard setting bodies (SSBs) have been advised that they require revision.
Qualification title |
Standard in the qualification |
SSB Name |
National Certificate in Architectural Aluminium Joinery (Entry Skills) (Level 2)[Ref: 0765] |
20498 |
Competenz |
National Certificate in Architectural Aluminium Joinery (Assembly and Glazing) (Level 3) with an optional strand in Cutting and Machining [Ref: 0766] |
20496, 20498, 20507 |
Competenz |
All changes are in bold.
Key to review category |
| |
A |
Dates changed, but no other changes are made - the new version of the standard carries the same Id and a new version number | |
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same Id and a new version number | |
C |
Major changes that necessitate the registration of a replacement standard with a new Id | |
D |
Standard will expire and not be replaced | |
Subfield Glass and Glazing
Domain Flat Glass
Id |
Title |
Level |
Credit |
Review Category |
2043 |
Install and glaze patent glazing systems |
3 |
5 |
D |
2045 |
Install glass to glass and/or metal with a silicone structural joint Install glass to glass and/or metal with structural silicone glazing |
4 |
5 |
B |
2046 |
Install mirror and mirror tiles Install mirrors |
3 |
4 |
B |
2048 |
Reglaze frames |
3 |
6 |
B |
2049 |
Glaze plastic into frames |
3 |
5 |
D |
2054 |
Process silvered glass |
4 |
5 |
D |
2057 |
Install glass blocks using a non-mortar system Install a glass block wall using a non-mortar system |
4 3 |
5 2 |
B |
2058 |
Install glass blocks using mortar systems |
4 |
5 |
D |
2060
26485 |
Optimise cutting of glass using a computerised optimiser Optimise cutting of glass |
2
3 |
4
6 |
C |
2062 |
Install solar control and specialist coated glass |
4 |
4 |
B |
20491 |
Process clad glass Coat or paint glass |
4 |
6 12 |
B |
20492 |
Process laminate glass Laminate glass |
4 |
7 |
B |
20493 |
Process Insulating Glass Units (IGUs) |
4 |
6 8 |
B |
20494 |
Process bent glass Bend glass |
4 |
6 |
B |
20495 |
Process toughened and heat strengthened glass Toughen and heat strengthen glass |
4
|
8
|
B |
20496
20503 26283 |
Load and unload vehicles used to carry glass, Insulating Glass Units and glazing materials Pack and unpack stock glass and processed glass Load and unload vehicles used to carry glass |
3
2 3 |
3
2 12 |
C
C |
20497 |
Work safely in the glass and glazing industry |
2 |
3 |
B |
20498 |
Use safe work practices to handle, store, and move glass manually |
2 |
6 4 |
B |
20499 |
Use safe work practices to handle glass with overhead mechanical handling systems |
3 |
4 |
B |
20500 |
Manage glass and glazing materials in a glass and glazing workplace Control stock, and unload and move glass from transport containers |
3 |
7 12 |
B |
20501 |
Unload transport containers of glass and glazing materials |
3 |
2 |
D |
20502 |
Load transport containers of glass and glazing materials Load transport containers with glass |
3 |
2 |
B |
20504 |
Install bent, laminated and toughened glass Install bent glass |
4 |
6 |
B |
20505 |
Cut glass with an automated or semi-automated machine |
3 |
4 8 |
B |
20506 |
Cut 12 mm - 25 mm glass to regular shapes manually Cut glass to regular shapes manually |
3 |
4 12 |
B |
20507 |
Cut glass to irregular shapes manually |
3 |
4 12 |
B |
20508 |
Drill, countersink and notch glass Notch and cut out glass manually |
4 3 |
5 6 |
B |
20509 |
Drill glass with an automated or semi-automated machine Drill and countersink glass |
3 |
4 |
B |
20510 |
Cut special glasses |
3 |
5 |
D |
20511 |
Cut 2mm - 10mm glass to regular shapes manually Cut glass to regular shapes manually on-site |
3 |
3 |
B |
20512 |
Install Insulating Glass Units (IGUs) |
4 |
6 |
B |
20513 |
Edgework glass with edgeworking machines |
4 |
5 8 |
B |
20514 |
Edgework glass with Computer Numerically Controlled (CNC) edgeworking machines Edgework glass using a Computer Numerically Controlled (CNC) machine |
5 4 |
6 8 |
B |
20515 |
Glaze timber joinery Install glass in timber joinery |
4 |
5 |
B |
20516 |
Glaze metal frames Install glass in metal frames |
4 |
5 |
B |
20517 |
Glaze aluminium and PVC joinery Install glass in aluminium and Polyvinyl Chloride (PVC) joinery |
4 |
5 6 |
B |
20518 |
Install frameless shower doors and screens Install frameless glass shower doors and screens |
4 |
6 |
B |
20519 |
Install toughened glass doors and entrances |
4 |
6 |
B |
20520 |
Install balustrade systems Install glass balustrade systems |
4 |
7 |
B |
20521 |
Install structural glass systems Install structural glass assemblies |
4 |
8 6 |
B |
20522 |
Edgework glass manually |
3 |
4 2 |
B |
26031 |
Demonstrate knowledge of solar control, specialist coated glass, and glazing systems |
3 |
4 |
New |
26032 |
Demonstrate knowledge of edgeworking glass manually |
2 |
2 |
New |
26033 |
Demonstrate knowledge of installing glass with structural silicone glazing |
2 |
2 |
New |
26034 |
Cut glass to irregular shapes manually on-site |
3 |
4 |
New |
26035 |
Demonstrate knowledge of processing toughened and heat strengthened glass |
3 |
6 |
New |
26036 |
Create computerised programmes for glass processing machines |
5 |
8 |
New |