Field Engineering and Technology
Review of Mechanical Engineering unit standards
Subfield |
Domain |
ID |
Mechanical Engineering |
Engineering - Materials |
2383, 4797, 4799-4802, 20799, 20917 |
Engineering - Measurement |
4432, 4433, 4435-4441 |
Competenz has completed the review of the unit standards listed above.
Date new versions published June 2011
Planned review date December 2016
Summary
Competenz completed a review of the unit standards above in consultation with the assessors, moderators and providers of the standards. Consultation was through an online survey and email. Comments retained in the Competenz database were also integrated.
The review was to ensure the standards still meet industry requirements, and to ensure they were clear, logical and fit for purpose.
The review found that the majority of the standards from the Engineering - Materials and Engineering - Measurement domains were fit for purpose. However there were updates and improvements that were able to be made to clarify interpretation. This included simplification and contextualisation. Changes made to the standards reflect the way that the standards are used in industry.
Main changes
· The level of standard 20799 was increased from 2 to 3 to provide a best match between the level descriptors and the outcomes and evidence requirements of the standard.
· References were checked and updated where required.
· The explanatory notes for each unit standard were standardised for consistency.
· Outcomes and evidence requirements in many of the standards were amended or added to, to better reflect current practices and industry requirements.
The Registration Criteria for National Qualifications Framework (NQF) Unit Standards have been reviewed and replaced with the Quality assurance criteria for the listing of unit standards on the Directory of Assessment Standards. The changes made to the criteria during this review reflect the replacement of the NQF and the Register with the New Zealand Qualifications Framework (NZQF) and the Directory of Assessment Standards, the inclusion of criteria for grades, and changes to terminology and format of unit standards. The main changes to terminology are that:
Special Notes were renamed Explanatory notes
Elements were renamed Outcomes
Performance Criteria were renamed Evidence requirements.
The standards covered by this report have been published in the new format.
Impact on existing accreditations
Current Accreditation for |
Accreditation extended to | ||||
Nature of accreditation |
Classification |
Level |
Nature of accreditation |
ID |
Level |
Subfield |
Mechanical Engineering |
2
|
Standard
|
20799
|
3
|
Domain |
Engineering - Materials |
Impact on registered qualifications
Key to type of impact | |
Affected |
The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a C or D category standard |
Not materially affected |
The qualification lists a standard that has a new title The qualification lists a standard that has a new classification |
The following Competenz qualifications are impacted by the outcome of this Review and will be updated when they are revised or reviewed in the period 2011 to 2014. The classifications and/or standards that generated the status Affected are listed in bold.
Ref |
Qualification Title |
ID |
0122 |
National Certificate in Engineering - Fabrication (Level 4) with strands in Heavy Fabrication, Light Fabrication, and Steel Construction |
20799
|
0124 |
National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) | |
0129 |
National Certificate in Metal Casting (Technology) | |
0130 |
National Certificate in Refrigeration and Air Conditioning (Level 4) | |
1220 |
National Certificate in Mechanical Engineering (Level 2) | |
1262 |
National Certificate in Mechanical Engineering (Level 4) with strands in Fitting and Machining, General Engineering, Machining, Maintenance Engineering, Toolmaking, and Electricity Supply | |
1387 |
National Certificate in Manufacturing (Metal and Related Products) (Level 3) | |
1388 |
National Certificate in Manufacturing (Metal and Related Products) (Level 4) | |
1615 |
National Certificate in Welding (Level 3) |
The following table identifies qualifications developed by other SSBs that are impacted by the outcome of this review. The SSBs have been advised that the qualifications require revision. The classifications and/or standards that generated the status Affected are listed in bold.
Ref |
Qualification Title |
ID |
SSB Name |
0742 |
National Certificate in Aeronautical Engineering (Aircraft Manufacture) |
20799 |
Aviation, Tourism and Travel Training Organisation |
1294 |
National Certificate in Electricity Supply (Electrical) (Level 3) with strands in Electricity Supply Electrician, Electrical Fitter, and Electrical Technician |
20799 |
Electricity Supply Industry Training Organisation |
1414 |
National Certificate in Motor Industry (Automotive Body) (Level 4) with strands in Coachbuilding, Collision Repair, and Refinishing |
20799 |
NZ Motor Industry Training Organisation (Incorporated) |
0394 |
National Certificate in Plastics Processing Technology (Technical) (Level 2) with strands in Injection Moulding, Extrusion, Blow Moulding, Pressure Thermoforming, Vacuum Thermoforming, Blown Film Extrusion, Film Conversion, Injection Stretch-Blow Moulding |
20799 |
Plastics and Materials Processing Industry Training Organisation Incorporated |
1235 |
National Certificate in Engineering and Technology (Pharmaceutical and Allied Products) (Level 2) | ||
1378 |
National Certificate in Engineering and Technology (Glass Container Mould Maintenance) (Level 2) | ||
1407 |
National Certificate in Engineering and Technology (Plastics Engineering) (Level 4) with strands in Injection Moulding, Extrusion, Blow Moulding, Pressure Thermoforming, Vacuum Thermoforming, Blown Film Extrusion, Film Conversion, Injection Stretch-Blow Moulding, and Rotational Moulding |
Detailed list of unit standards - classification, title, level, and credits
All changes are in bold.
Key to review category | |
A |
Dates changed, but no other changes are made - the new version of the standard carries the same ID and a new version number |
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same ID and a new version number |
C |
Major changes that necessitate the registration of a replacement standard with a new ID |
D |
Standard will expire and not be replaced |
Engineering and Technology > Mechanical Engineering > Engineering - Materials
ID |
Title |
Level |
Credit |
Review Category |
2383 |
Carry out heat treatment of metal parts under supervision |
2 |
2 |
B |
4797 |
Demonstrate knowledge of the composition of engineering metals |
3 |
5 |
B |
4799 |
Test the physical properties of engineering metals |
4 |
4 |
B |
4800 |
Demonstrate knowledge of heat treatment for engineering steels |
4 |
5 |
B |
4801 |
Demonstrate knowledge of heat treatment for engineering non-ferrous metals |
4 |
4 |
B |
4802 |
Complete heat treatment of engineering metals in a furnace |
4 |
10 |
B |
20799 |
Demonstrate basic knowledge of engineering metals |
2 3 |
4 |
B |
20917 |
Demonstrate basic knowledge of engineering materials |
2 |
2 |
B |
Engineering and Technology > Mechanical Engineering > Engineering - Measurement
ID |
Title |
Level |
Credit |
Review Category |
4432 |
Demonstrate knowledge of, and convert, units of measure used in engineering |
2 |
2 |
B |
4433 |
Select, use, and care for simple measuring devices used in engineering |
1 |
2 |
B |
4435 |
Select, use, and care for engineering dimensional measuring equipment |
2 |
3 |
B |
4436 |
Select, use, and care for engineering marking-out equipment |
2 |
4 |
B |
4437 |
Select, use, and care for advanced engineering measuring equipment |
3 |
3 |
B |
4438 |
Demonstrate knowledge of fits, limits, and tolerances in engineering |
2 |
2 |
B |
4439 |
Select, use, and care for complex engineering measuring equipment for precision jobs |
4 |
4 |
B |
4440 |
Demonstrate and apply knowledge of international tolerancing in engineering |
4 |
4 |
B |
4441 |
Calibrate engineering measuring devices and equipment |
4 |
4 |
B |