Field Engineering and Technology
Review, revision and rollover of, and transfer of standard setting responsibility for, Generic Design unit standards
Subfield |
Domain |
ID |
Design |
Generic Design |
2079, 2094, 2100, 15720-15724, 15725, 15726-15734, 15788, 16534, 16535, 16537 |
NZQA National Qualifications Services has completed the review and revision and rollover of the unit standards listed above. The standards in bold were reviewed.
Date new versions published February 2012
Planned review date December 2013
Summary
Responsibility for these unit standards has been transferred from InfraTrain New Zealand to NZQA National Qualifications Services.
The revised unit standards have been updated to meet industry requirements and will be reviewed in December 2013.
The reviewed unit standards were designated as expiring and will not be replaced because of lack of usage.
Main changes
· Terminology and references to legislation have been updated in the explanatory notes of the revised unit standards.
· The planned review date for the revised unit standards has been changed to December 2013.
· Reviewed unit standards 15725, 16534, 16535, and 16537 have been designated as expiring and will not be replaced because they have had no usage for the past three years.
Category D unit standards will expire at the end of December 2013.
Impact on Consent and Moderation Requirements (CMR)
The reviewed and revised unit standards have been transferred from CMR 0101 to CMR 0235.
Impact on registered qualifications
Key to type of impact | |
Affected |
The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a C or D category standard |
Not materially affected |
The qualification lists a standard that has a new title The qualification lists a standard that has a new classification |
The following table identifies a qualification developed by InfraTrain New Zealand that is Affected by the outcome of the review. The SSB has been advised that the qualification requires revision.
Ref |
Qualification Title |
ID |
0682 |
National Certificate in Design (Technician) (Level 4) |
15725, 16534, 16535, 16537 |
Detailed list of unit standards - classification, title, level, and credits
Review
Key to review category | |
A |
Dates changed, but no other changes are made - the new version of the standard carries the same ID and a new version number |
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same ID and a new version number |
C |
Major changes that necessitate the registration of a replacement standard with a new ID |
D |
Standard will expire and not be replaced |
Engineering and Technology > Design > Generic Design
ID |
Title |
Level |
Credit |
Review Category |
15725 |
Apply anthropometric and human factors engineering data to design problems |
5 |
10 |
D |
16534 |
Coordinate design project procurement options and make recommendations |
4 |
4 |
D |
16535 |
Coordinate contracts and monitor work in progress for design implementation |
4 |
5 |
D |
16537 |
Coordinate specialist consultants and suppliers for a design project, under supervision |
4 |
5 |
D |
Revision
Engineering and Technology > Design > Generic Design
ID |
Title |
Level |
Credit |
2079 |
Determine team and design performance, and market position |
7 |
3 |
2094 |
Prepare application for design protection |
6 |
3 |
2100 |
Obtain client approval for design solutions |
4 |
8 |
15720 |
Write a design brief |
5 |
3 |
15721 |
Prepare proposals for design services |
5 |
3 |
15722 |
Establish design project procurement options and make recommendations |
5 |
4 |
15723 |
Co-ordinate specialist consultants and suppliers for a design project |
6 |
5 |
15724 |
Undertake feasibility studies for design projects |
6 |
10 |
15726 |
Gather and interpret research information on a design project brief |
4 |
10 |
15727 |
Present contract documents for design project implementation |
6 |
8 |
15728 |
Appoint contractors and suppliers for design implementation |
7 |
3 |
15729 |
Administer contracts and supervise work in progress for design implementation |
7 |
5 |
15730 |
Produce conceptual design ideas |
4 |
15 |
15731 |
Select materials and processes for design projects |
4 |
8 |
15732 |
Develop design solutions |
5 |
20 |
15733 |
Produce applied design artwork |
6 |
5 |
15734 |
Prepare design project cost assessment |
5 |
4 |
15788 |
Render design intention using manual techniques |
5 |
30 |