Field Engineering and Technology
Review of Industrial Measurement and Control unit standards
Subfield |
Domain |
ID |
Industrial Measurement and Control |
Industrial Measurement and Control - Maintenance |
2631, 2633, 2635, 2637, 2639, 2640, 2642-2648, 2657, 2664, 2667, 4356-4357, 9180, 19234, 24884 |
The Skills Organisation has completed the review of the standards listed above.
Date new versions published Month 2013
Planned review date December 2017
Summary
These standards constitute the Level 3 and Level 4 standards in the Industrial Measurement and Control - Maintenance domain, with the addition of the Level 5 standard 19234. The review was conducted in conjunction with the development of two proposed New Zealand Certificates in Industrial Measurement and Control at Level 4 and 5 to ensure that the standards reflect industry best practice. The review group consisted of industry experts and training providers, with additional input occurring via a wider email network consultation group. There are further unit standards in the Industrial Measurement and Control subfield under development.
Main changes
· Standards 2631, 2635, and 2639 have been changed from Level 3 to Level 4 to more accurately indicate the complexity of the skills and knowledge required. The scope of these standards has broadened to include testing of systems as well as discreet devices.
· Purpose statements of, and the corresponding outcome, evidence requirements and ranges in, standards 2631 and 2635 have changed where required to include testing of systems as well as discreet components.
· The purpose statement and the corresponding outcome, evidence requirements and ranges in, standards in standard 19234 have been amended.
· The evidence requirements of all standards have been rewritten in active voice to improve clarity of the statements.
· Unit standard 9180 has been moved to the Industrial Measurement and Control - Installation domain as this better indicates the content and assessment requirements of the unit standard.
· Entry information has been updated in standards 2631, 2637, 2642-2648, 2664, 2667, 4356, 9180 to align with the reviewed Industrial Measurement and Control – Theory unit standards.
· The context for learning and assessment of the unit standards has been modified in the explanatory notes to refer to ‘workplace environment’ so as to make the unit standards achievable in a wider range of contexts.
· References in the explanatory notes have been updated where required.
· Last date of assessment of 31 December 2017 has been added the last superseded version of each standard, and 31 December 2013 to all previous versions.
Impact on existing organisations with consent to assess
Current consent for |
Consent extended to | ||||
Nature of consent |
Classification or ID |
Level |
Nature of consent |
Classification or ID |
Level |
Standard |
2631, 2635, 2639 |
3 |
Standard |
2631, 2635, 2639 |
4 |
Domain |
Industrial Measurement and Control - Maintenance |
4 |
Standard |
9180 |
4 |
Impact on registered qualifications
Key to type of impact | |
Affected |
The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a C or D category standard |
Not materially affected |
The qualification lists a standard that has a new title The qualification lists a standard that has a new classification |
The following Skills Organisation qualification is impacted by the outcome of this review and is currently under review. The standards that generated the status Affected are listed in bold.
Ref |
Qualification Title |
Classification or ID |
0410 |
National Certificate in Industrial Measurement and Control (Level 4) |
2631, 2635, 2639 |
Detailed list of unit standards – classification, title, level, and credits
All changes are in bold.
Key to review category | |
A |
Dates changed, but no other changes are made - the new version of the standard carries the same ID and a new version number |
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same ID and a new version number |
C |
Major changes that necessitate the registration of a replacement standard with a new ID |
D |
Standard will expire and not be replaced |
Engineering and Technology > Industrial Measurement and Control > Industrial Measurement and Control - Maintenance
ID |
Title |
Level |
Credit |
Review Category |
2631 |
Maintain pressure measurement devices |
3 4 |
10 |
B |
2633 |
Maintain level measurement devices used in industry |
3 |
10 |
B |
2635 |
Maintain temperature measurement devices used in industry |
3 4 |
10 |
B |
2637 |
Maintain flow measurement devices used in industry |
3 |
10 |
B |
2639 |
Maintain and service control valves in accordance with industry requirements |
3 4 |
10 |
B |
2640 |
Maintain control valve actuators and positioners |
3 |
5 |
B |
2642 |
Maintain a pH measuring system for chemical analysis |
4 |
4 |
B |
2643 |
Maintain a conductivity measuring system |
4 |
4 |
B |
2644 |
Maintain a dissolved oxygen measuring system |
4 |
4 |
B |
2645 |
Maintain a consistency or a viscosity measuring system |
4 |
4 |
B |
2646 |
Maintain analytical monitoring equipment |
4 |
4 |
B |
2647 |
Maintain humidity or dewpoint monitoring equipment |
4 |
4 |
B |
2648 |
Maintain and calibrate density monitoring equipment |
4 |
4 |
B |
2657 |
Maintain pneumatic controllers |
4 |
5 |
B |
2664 |
Maintain hydraulic or electro-hydraulic equipment |
3 |
3 |
B |
2667 |
Install and service pneumatic or electro-pneumatic equipment |
3 |
5 |
B |
4356 |
Maintain chromatographs |
4 |
4 |
B |
4357 |
Tune or adjust a plant control loop |
4 |
2 |
B |
19234 |
Diagnose and correct faults in industrial measurement and control systems |
5 |
10 |
B |
24884 |
Maintain conditioning modules and electronic or microprocessor based controllers |
4 |
6 |
B |
Engineering and Technology > Industrial Measurement and Control
ID |
Domain |
Title |
Level |
Credit |
Review Category |
9180 |
Industrial Measurement and Control - Maintenance Industrial Measurement and Control - Installation |
Install or replace, test, and commission industrial instrumentation |
4 |
10 |
B |