Field Engineering and Technology
Review of Motor Industry unit standards
|
Subfield |
Domain |
ID |
|
Motor Industry |
Automotive Refinishing |
5729 |
|
Automotive Sales |
11743, 22792, 22793 |
|
|
Automotive Transmission Systems |
3380, 23808, 24309-24313, 24328, 24329, 24333, 24334 |
|
|
Automotive Workshop Engineering |
2344, 11722, 11724, 11737, 15432, 23809, 23810, 24376, 24387, 24390 |
|
|
Collision Repair |
5751, 23985 |
|
|
Engines |
2335, 11723, 15434, 23812, 24285, 24288-24293, 24295-24299, 24301 |
|
|
Tyres |
23813, 23814 |
MITO New Zealand Incorporated has completed the review of the unit standards listed above.
Summary
These unit standards were due for review. It was identified that these unit standards had had little or no usage over the past five years, and were, therefore, considered to no longer be required.
All organisations with consent to assess against these standards were advised of the intended expiry and no objections to the proposed expiry were received. Feedback was also invited through a consultation period on the MITO website during March 2018, and no feedback objecting to the proposed expiry was received from the consultation.
Main changes
The unit standards were set to expire without replacement.
These Category D unit standards will expire at the end of December 2020
Detailed list of unit standards – classification, title, level, and credits
|
Key to review category |
|
|
A |
Dates changed, but no other changes are made - the new version of the standard carries the same ID and the same version number |
|
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same ID and a new version number |
|
C |
Major changes that necessitate the registration of a replacement standard with a new ID |
|
D |
Standard will expire and not be replaced |
Engineering and Technology> Motor Industry > Automotive Refinishing
|
ID |
Title |
Level |
Credit |
Review Category |
|
5729 |
Paint vehicle panels in three layer pearl and two pack clearcoat |
4 |
8 |
D |
Engineering and Technology> Motor Industry > Automotive Sales
|
ID |
Title |
Level |
Credit |
Review Category |
|
11743 |
Demonstrate knowledge of ethical behaviour for vehicle salespersons |
4 |
4 |
D |
|
22792 |
Dispense liquefied petroleum gas (LPG) to fill a portable cylinder |
2 |
2 |
D |
|
22793 |
Demonstrate knowledge of liquefied petroleum gas (LPG) for automotive and/or domestic use |
2 |
2 |
D |
Engineering and Technology> Motor Industry > Automotive Transmission Systems
|
ID |
Title |
Level |
Credit |
Review Category |
|
3380 |
Overhaul light vehicle clutch cover assemblies and repair and/or replace associated components |
3 |
2 |
D |
|
23808 |
Demonstrate knowledge of transmission requirements for competition race vehicles |
3 |
4 |
D |
|
24309 |
Demonstrate knowledge of motorcycle clutches and transmissions |
3 |
2 |
D |
|
24310 |
Diagnose faults and overhaul a motorcycle transmission |
4 |
6 |
D |
|
24311 |
Rectify faults in a motorcycle clutch |
3 |
2 |
D |
|
24312 |
Demonstrate knowledge of clutches and transmissions used on all-terrain vehicles (ATVs) |
3 |
2 |
D |
|
24313 |
Diagnose faults and overhaul all-terrain vehicle (ATV) transmissions, sub-transmissions, and shaft drives |
4 |
10 |
D |
|
24328 |
Demonstrate knowledge of driveline components used on outdoor powered equipment |
3 |
2 |
D |
|
24329 |
Check and rectify driveline faults on outdoor powered equipment |
3 |
3 |
D |
|
24333 |
Diagnose and rectify faults in an all-terrain vehicle (ATV) clutch |
4 |
4 |
D |
|
24334 |
Diagnose and rectify faults on the electronic auto-shift on a heavy vehicle manual transmission |
4 |
4 |
D |
Engineering and Technology> Motor Industry > Automotive Workshop Engineering
|
ID |
Title |
Level |
Credit |
Review Category |
|
2344 |
Diagnose and repair winches and pulley block assemblies on heavy machinery or equipment |
4 |
2 |
D |
|
11722 |
Inspect and repair driveshaft (propeller shaft) assemblies |
4 |
15 |
D |
|
11724 |
Inspect and balance automotive components |
4 |
10 |
D |
|
11737 |
Demonstrate knowledge of exhaust shop equipment |
2 |
4 |
D |
|
15432 |
Inspect and repair ground conditioning and turf equipment |
4 |
15 |
D |
|
23809 |
Demonstrate knowledge of non-destructive testing of automotive components |
3 |
2 |
D |
|
23810 |
Carry out a non-destructive test to determine serviceability of automotive components |
3 |
2 |
D |
|
24376 |
Demonstrate knowledge of hydraulic brake and clutch cylinder resleeving procedures |
4 |
1 |
D |
|
24387 |
Resleeve a brake or clutch hydraulic cylinder |
4 |
4 |
D |
|
24390 |
Inspect and repair walk behind rotary mowers, ride-on mowers, and lawn tractors |
4 |
9 |
D |
Engineering and Technology> Motor Industry > Collision Repair
|
ID |
Title |
Level |
Credit |
Review Category |
|
5751 |
Repair minor vehicle panel damage without paint damage |
3 |
2 |
D |
|
23985 |
Remove, repair, and replace damaged motor vehicle metal bumpers |
3 |
4 |
D |
Engineering and Technology> Motor Industry > Engines
|
ID |
Title |
Level |
Credit |
Review Category |
|
2335 |
Repower heavy vehicles or equipment |
4 |
3 |
D |
|
11723 |
Inspect and machine engine camshafts |
4 |
15 |
D |
|
15434 |
Diagnose and rectify inboard four stroke diesel engine faults on trailer boats |
4 |
10 |
D |
|
23812 |
Demonstrate knowledge of competition race vehicle engine performance modification requirements and practices |
5 |
7 |
D |
|
24285 |
Demonstrate knowledge of motorcycle engine cooling systems and testing motorcycle engine cooling systems |
3 |
2 |
D |
|
24288 |
Demonstrate knowledge of repowering heavy vehicles or equipment |
4 |
1 |
D |
|
24289 |
Diagnose and rectify faults in auxiliary engines on heavy vehicles or equipment |
4 |
5 |
D |
|
24290 |
Inspect and service auxiliary engines on heavy vehicles or equipment |
3 |
3 |
D |
|
24291 |
Demonstrate knowledge of inspecting and machining engine piston and connecting rod assemblies |
3 |
6 |
D |
|
24292 |
Demonstrate knowledge of motorcycle engine cylinder head faults, and their inspection and repair requirements |
4 |
3 |
D |
|
24293 |
Demonstrate knowledge of motorcycle engine crankshaft assembly faults and their inspection and repair requirements |
4 |
1 |
D |
|
24295 |
Demonstrate knowledge of small engine air cooling systems and their test and service procedures |
3 |
2 |
D |
|
24296 |
Test and rectify faults in a small engine air cooling system |
3 |
3 |
D |
|
24297 |
Demonstrate knowledge of engine gasket and sealant options |
3 |
2 |
D |
|
24298 |
Align bore and hone bearing tunnels |
4 |
3 |
D |
|
24299 |
Demonstrate knowledge of engine crankshaft and camshaft machining procedures |
4 |
4 |
D |
|
24301 |
Disassemble, inspect, and reassemble a multi-cylinder motorcycle engine |
3 |
4 |
D |
Engineering and Technology> Motor Industry > Tyres
|
ID |
Title |
Level |
Credit |
Review Category |
|
23813 |
Demonstrate knowledge of competition tyres and their applications for motorsport events |
3 |
4 |
D |
|
23814 |
Select competition tyres for a specific motorsport event, and monitor tyre performance |
4 |
2 |
D |