Field Manufacturing, and Engineering and Technology
Review, and Rollover and Revision of Boating Industries, Composites, and Motor Industry unit standards
Subfield |
Domain |
ID |
Motor Industry |
Trailer Boat Systems |
15451 |
Boating Industries |
Boatbuilding |
9925, 9927, 9929, 9931, 9934, 9939, 9940, 9941, 9942, 9943, 9945, 9947, 9948, 10843, 11776, 11777, 11780, 11783, 11784, 11785, 11791, 11792, 11793, 11794, 11795, 11796, 11797, 11798, 11799, 23038, 23047, 23242, 23247, 25157, 26088 |
Marine Design |
10853-10856, 10858-10863, 10865-10869 |
|
Composites |
Industrial Composites |
3180, 26562 |
Production Composites |
3188, 3196, 23254, 26559, 26560 |
|
Specification and Design Composites |
3191, 3194, 3195, 3197 |
The NZ Marine and Composites Industry Training Organisation (NZMAC ITO) has completed the review of the unit standards listed above. The unit standards in bold were rolled over and revised only.
Date new versions published July 2018
Planned review date (new and reviewed standards) December 2023
Planned review date (rolled over and revised standards) December 2020
Summary
NZMAC ITO carried out a review to better align these unit standards to the graduate profile outcomes of the New Zealand qualifications relating to the marine and composites industry and also to reflect the new health and safety legislation. Industry and subject matter experts provided feedback and input into the review of these unit standards.
Unit standard 3180 was recommended to expire as it is no longer fit for purpose.
NZMAC ITO developed new unit standards for the New Zealand Certificate in Power Boat Rigging (Level 4) [Ref: 3847] and the New Zealand Certificate in Power Boat Systems Servicing and Repair (Technician) (Level 4) [Ref: 3848] to meet the graduate outcomes of these qualifications. The review was carried out in consultation with, and endorsed by, representatives from the trailer boat sector.
Main changes
· Content of the unit standards and titles were updated to better reflect the standard outcomes.
· Guidance information was updated to reflect the changes in legislation.
· Unit standards in the domains listed above in bold were rolled over and revised to update legislation and references.
· Unit standard 3180 was designated expiring and will not be replaced.
· 15 new unit standards were developed.
Detailed list of unit standards – classification, title, level, and credits
All changes are in bold.
Key to review category |
|
A |
Dates changed, but no other changes are made - the new version of the standard carries the same ID and a new version number |
B |
Changes made, but the overall outcome remains the same - the new version of the standard carries the same ID and a new version number |
C |
Major changes that necessitate the registration of a replacement standard with a new ID |
D |
Standard will expire and not be replaced |
New and Reviewed unit standards
Engineering and Technology > Motor Industry > Trailer Boat System
ID |
Title |
Level |
Credit |
Review Category |
15451 |
Demonstrate knowledge of the construction and rigging requirements of trailer boats Demonstrate knowledge of rigging requirements of power boats |
3 |
10 |
B |
31199 |
Check and rectify manual starting system component faults on a small marine engine |
3 |
2 |
New |
31201 |
Diagnose and repair faults on four stroke marine engine |
4 |
15 |
New |
31202 |
Demonstrate knowledge of petrol and an electronic fuel injection (EFI) system for a marine engine |
3 |
4 |
New |
31204 |
Explain marine engine management systems |
3 |
4 |
New |
31205 |
Inspect, diagnose, and repair a two stroke marine engine |
4 |
6 |
New |
31206 |
Inspect, service and repair a boat trailer |
4 |
6 |
New |
31208 |
Disassemble and rectify faults on a marine engine short block |
4 |
5 |
New |
31209 |
Apply lubricants and sealants in a marine engine system |
2 |
2 |
New |
31210 |
Service outboard marine engine |
3 |
4 |
New |
31211 |
Inspect and test a four stroke petrol marine engine |
3 |
4 |
New |
Manufacturing > Boating Industries > Boatbuilding
ID |
Title |
Level |
Credit |
Review Category |
9934 |
Construct interior support structures for boats |
4 |
15 |
B |
9940 |
Plank and glass sheathe a mould or boat |
4 |
15 |
B |
23038 |
Form and shape compound aluminium plate for boats |
4 |
10 |
B |
23242 |
Loft full sized decks and superstructures |
4 |
6 |
B |
25157 |
Build metal boat framework under supervision Build metal boat framework |
3 |
20 |
B |
31200 |
Demonstrate basic knowledge of carburettor system in a marine engine |
3 |
3 |
New |
31203 |
Diagnose, repair, and test marine engine electrical wiring faults |
4 |
5 |
New |
31207 |
Dismantle, check, and rectify cylinder head of a marine engine |
4 |
4 |
New |
31212 |
Test and rectify faults in marine engine charging and starting systems |
4 |
5 |
New |
31213 |
Test, diagnose and rectify marine electronic fuel injection (EFI) system |
4 |
6 |
New |
Manufacturing > Composites > Industrial Composites
ID |
Title |
Level |
Credit |
Review Category |
3180 |
Produce an item by centrifugal force for composites |
4 |
7 |
D |
Manufacturing > Composites > Production Composites
ID |
Title |
Level |
Credit |
Review Category |
3196 |
Test properties of a composite laminate Test a composite laminate |
4 |
10 |
B |
23254 |
Touch up and restore gelcoat |
4 |
4 |
B |
26559 |
Lift, support, and secure large composite components safely |
3 |
5 |
B |
26560 |
Demonstrate knowledge of gelcoat application equipment |
4 |
4 |
B |