Domain - Finger Jointing

Demonstrate knowledge of the principles of finger jointing in solid wood manufacturing

Version 5

15055 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: finger jointing; the finger jointing processes and product end uses; glues; and quality control in finger jointing.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Clean engineered wood product equipment and machinery

Version 6

4544 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare engineered wood product equipment and glue system for cleaning; clean engineered wood product equipment and surrounding area; clean glue system; and report machine defects.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Test finger jointed product in solid wood manufacturing

Version 6

15058 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of finger jointing requirements; carry out selection, labelling, physical testing, and results analysis of test samples; and carry out calibration of test equipment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain technical aspects of tooling and machinery for finger jointing

Version 2

22985 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain finger joint profile options; finger joint profile tooling; trim saws and scribing saws used in finger jointing; and the control of the press during finger jointing operations.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Set up finger jointer for wood product manufacturing

Version 2

28115 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: set up and adjust shaper unit; set up crower and out-feed; and check dry joints and adjust shaper.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of grinding finger jointer cutterhead in solid wood manufacturing

Version 1

32151 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Feed and tail out finger jointer

Version 9

4546 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: manage health and safety when feeding and tailing out a finger jointer; demonstrate knowledge of the operation and operating principles of a finger jointer; prepare to operate the finger jointer; feed shook into finger jointer; monitor finger jointer operation; carry out out-feed operations; and record downtime, report machinery breakages, and isolate machinery.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Maintain finger jointer cutterhead in solid wood manufacturing

Version 7

15060 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the operating principles of a finger jointer cutterhead in solid wood manufacturing; clean cutterhead; balance cutters; and reassemble cutterhead for grinding.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Grind finger jointer cutterhead in solid wood manufacturing

Version 8

15061 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: manage hazards associated with grinding a finger jointer cutterhead in solid wood manufacturing; demonstrate knowledge of the operation and operating principles of a grinder; prepare grinder; mount and adjust cutterhead; grind a finger jointer cutterhead; and store cutterhead.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Set up finger jointer for solid wood manufacturing

Version 2

20772 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of face-to-face finger jointing; set up and adjust trim saws, shaper units, transfer system and glue applicator; set up radio frequency tunnel from crowder to out-feed of the finger jointer; check dry joints, adjust shaper and trim saws; and undertake maintenance for face-to-face finger jointing machinery.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Set up edge-to-edge finger jointer for solid wood manufacturing
This standard has expired and is no longer available.

Version 3

21763 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of edge-to-edge finger jointing; set up and adjust trim saws, shaper units, scoring saws, transfer system, and glue applicator; set up radio frequency tunnel from crowder to out-feed of the finger jointer; check dry joints, adjust shaper and trim saws; undertake maintenance for edge-to-edge finger jointing machinery.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Identify, diagnose, and rectify finger jointed product defects

Version 2

22986 Unit Standard 25 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify the causes of finger jointed product defects; diagnose joint failure in finger jointed products; and rectify finger jointed product defects. This unit standard is for those involved in the troubleshooting of finger jointing operations, while the operation of the finger jointer is covered in Unit 4547, Coordinate finger jointer operations in solid wood manufacturing.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Coordinate finger jointer operations in solid wood manufacturing

Version 6

4547 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of finger jointing operations in solid wood manufacturing; organise in-feed to finger jointer; monitor machine production volume and quality of shooks; organise out-feed; demonstrate knowledge of handling and storage of glue ingredients, glues, and residues.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Evaluate finger jointer performance variables
This standard has expired and is no longer available.

Version 5

22987 Unit Standard 35 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: analyse uses and specifications of edge-to-edge and face-to-face finger joints; evaluate tooling options for optimum finger jointing operation; evaluate glue options to minimise adhesive wastage and maximise product quality; optimise glue systems on a specific finger jointer to maximise jointer performance and ensure product quality; and analyse product flow factors that influence finger jointer performance.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council