Domain - Drilling - General
TOP > Engineering and Technology > Drilling Industry > Drilling - General
| 0 Qualifications | 63 Assessment Standards (63 Coversheets) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Load, secure, and unload drilling equipment and materials
Version 3
22460 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB201D. People credited with this standard are able to: plan and prepare for loading, securing and unloading of drilling equipment and materials; load equipment and materials; secure equipment and materials; unload equipment and materials; and conduct housekeeping activities.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up and pack up a drill site
Version 3
22461 Coversheet 3 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB202D. People credited with this standard are able to: plan and prepare for setting up and packing up of drill sites; assist driller to set up drill rig; set up and dismantle ancillary equipment; and pack up drill site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Support drilling process
Version 3
22462 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB203D. People credited with this standard are able to: plan and prepare for supporting the drilling process; operate ancillary equipment; clean all equipment at drilling site; maintain levels of supplies; perform basic measurement and calculations; and carry out basic operator maintenance.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist with air drilling
Version 3
22463 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB219D. People credited with this standard are able to: plan and prepare for assisting with air drilling; support the air drilling process; handle samples; use restraining devices; mix drilling fluids for air/foam drilling; and carry out basic maintenance of tools and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist continuous flight auger drilling
Version 4
22464 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB205E. People credited with this standard are able to: plan and prepare for assisting with continuous flight auger drilling; assist with augering process; clean equipment; carry out water sampling; and carry out basic maintenance of tools and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist large diameter auger drilling
Version 3
22465 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB206E. People credited with this standard are able to: plan and prepare for assisting with large diameter auger drilling; assist with augering process; mix drilling fluids; clean equipment; and carry out basic maintenance of tools and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist diamond core drilling
Version 3
22467 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB208D. People credited with this standard are able to: plan and prepare for assisting with diamond core drilling; support the core drilling process; handle core samples; mix drilling fluids; and carry out basic maintenance of tools and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist guided boring
This standard has expired and is no longer available.
Version 3
22468 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB209D. People credited with this standard are able to: plan and prepare for assisting guided boring; support the guided boring process; mix drilling fluids; and carry out basic maintenance of tools and equipment.
Standard-setting body:
Assist surface directional drilling
This standard has expired and is no longer available.
Version 3
22469 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB210D. People credited with this standard are able to: plan and prepare for assisting with surface directional drilling; support the surface directional drilling process; and carry out basic maintenance of tools and equipment.
Standard-setting body:
Assist mud rotary drilling
Version 3
22470 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB211D. People credited with this standard are able to: plan and prepare for assisting with mud rotary drilling; support the rotary mud drilling process; handle samples; mix drilling fluids; and carry out basic maintenance of tools and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist cable tool drilling
Version 3
22472 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB213D. People credited with this standard are able to: plan and prepare for assisting with cable tool drilling; support the cable tool drilling process; handle samples; mix drilling fluids; and carry out basic maintenance of tools and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Contribute to the control of emergencies and critical situations in a drilling environment
This standard has expired and is no longer available.
Version 3
23176 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIERR202D. People credited with this standard are able to: plan and prepare for the control of emergencies and critical situations; contribute to the control of critical situations; respond to emergencies in other areas; comply with rig safety procedures; and participate in fire drills.
Standard-setting body:
Prepare and operate drilling fluid systems
Version 3
23178 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD203E. People credited with this standard are able to: plan and prepare for operations; establish operational requirements; select and test equipment; prepare drilling fluids; pump drilling fluids; and operate hopper system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Handle and store cargo in a drilling environment
Version 3
23212 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIHAN202D. People credited with this standard are able to: plan and prepare to handle and store cargo; handle and store cargo; handle and store bulk cargo; and assist with crane operations.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist in the transfer of passengers and freight during helicopter operations in a drilling environment
This standard has expired and is no longer available.
Version 3
23213 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGF202D. People credited with this standard are able to: plan and prepare for the transfer of passengers and freight during helicopter operations; prepare for helicopter landing; load and unload helicopter; refuel; carry out helicopter ''standby'' duties; and prepare for helicopter departure.
Standard-setting body:
Maintain and monitor site quality standards in a drilling environment
This standard has expired and is no longer available.
Version 3
23220 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIQUA201D. People credited with this standard are able to: plan and prepare for quality work outcomes; apply quality systems to own work; and monitor and report quality standards
Standard-setting body:
Assist in maintaining rig safety and emergency procedures in a drilling environment
Version 2 This unit standard replaced unit standard 22456, unit standard 23171, and unit standard 23172.
28311 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD201D. People credited with this standard are able to: plan and prepare for maintaining rig safety and emergency procedures; assist in securing rig for diverse weather conditions, rig moves or emergencies, as directed; participate in fire drills; and demonstrate safe working procedures.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify and minimise environmental hazards in a drilling environment
Version 2
28313 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency MSMENV172. People credited with this standard are able to: identify environmental threats; identify workplace procedures and policies to minimise environmental threats; and follow procedures to minimise environmental threats.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify and assess environmental and heritage concerns in a drilling environment
Version 3
28314 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIENV201D. People credited with this standard are able to: identify site specific environmental and heritage concerns; assess and respond to environmental and heritage concerns; and work within environmental and heritage guidelines.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assist underground in-seam directional drilling
This standard has expired and is no longer available.
Version 2
28328 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB216D. People credited with this standard are able to: plan and prepare for assisting underground in-seam directional drilling; support the underground in-seam directional drilling process; and carry out basic maintenance of tools and equipment.
Standard-setting body:
Assist grouting or cementing operations in a drilling environment
Version 2
28329 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB218D. People credited with this standard are able to: plan and prepare for assisting the grouting or cementing operations; operate ancillary equipment; perform basic measurement and calculations; grout and cement hole; and clean all equipment at completion of grouting or cementing.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Support blow out prevention operations in a drilling environment
This standard has expired and is no longer available.
Version 2
28330 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD205D. People credited with this standard are able to: plan and prepare for operations; assist with well BOP operations; and monitor and report safety issues.
Standard-setting body:
Assist with coal seam gas control in a drilling environment
This standard has expired and is no longer available.
Version 2
28331 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD206D. People credited with this standard are able to: plan and prepare for assisting with coal seam gas control; assist with coal seam gas control activities; and monitor and report safety issues.
Standard-setting body:
Level 4
Set up and prepare for drilling operations
Version 3
22475 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB301D. People credited with this standard are able to: plan and prepare for drilling operations; prepare to drill; set up drill and equipment; and diagnose problems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Run on-site operations in a drilling environment
Version 3
22476 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIBEF301D. People credited with this standard are able to: ensure the work health and safety requirements are adhered to by all; communicate regularly with client, personnel, and other relevant parties; diagnose and solve routine problems; monitor work program; coordinate work; and maintain operating records.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Construct monitoring bores (instrumentation)
Version 3
22479 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB320D. People credited with unit standard are able to: plan and prepare for constructing monitoring bores; construct monitoring bores; purge bores; disinfect/decontaminate bore and drilling equipment; decommission test holes; and complete and submit required reports.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Construct and complete single aquifer production bores
Version 3
22480 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB325D. People credited with this standard are able to: plan and prepare for the construction of single aquifer production bores; design production bores for single aquifer systems; construct production bores in single aquifer systems; develop bore; disinfect/decontaminate bore and drilling equipment; carry out bore maintenance and rehabilitation; and decommission test/bore holes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Construct multiple aquifer production bores
Version 3
22481 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB322D. People credited with this standard are able to: plan and prepare for multiple aquifer production bores; design production bores for multiple aquifer systems; construct production bores in multiple aquifer systems; develop bore; disinfect/decontaminate bore and drilling equipment; carry out bore maintenance and rehabilitation; and decommission test/bore holes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct air drilling
Version 3
22482 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB304D. People credited with this standard are able to: plan and prepare for air drilling; inspect and maintain air drilling equipment; drill using air drilling methods; select and use drilling additives; take samples; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct continuous flight auger drilling
Version 3
22483 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB305E. People credited with this standard are able to: plan and prepare for continuous flight auger drilling; operate continuous flight auger drill; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct large diameter auger drilling
Version 3
22484 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB306E. People credited with this standard are able to: plan and prepare for large diameter auger drilling; operate large diameter auger drill; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct conventional core drilling
Version 3
22485 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB307D. People credited with this standard are able to: plan and prepare for conventional core drilling; operate core drill; operate drill fluid system; use survey and core orientation equipment; take core samples; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct wireline core drilling
Version 3
22486 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB308D. People credited with this standard are able to: plan and prepare for wireline core drilling; operate a core dill; operate drill fluid system; operate wireline; use hole survey and core orientation equipment; take core samples; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct guided boring
This standard has expired and is no longer available.
Version 3
22487 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB309D. People credited with this standard are able to: plan and prepare for guided boring; bore pilot hole; complete back reaming, and product pull back; respond to problems; and complete equipment maintenance and housekeeping.
Standard-setting body:
Conduct surface directional drilling
This standard has expired and is no longer available.
Version 3
22488 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB310D. People credited with this standard are able to: plan and prepare for surface directional drilling; bore pilot hole; respond to problems; and complete equipment maintenance and housekeeping.
Standard-setting body:
Conduct reaming
This standard has expired and is no longer available.
Version 3
22489 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB302D. People credited with this standard are able to: plan and prepare for reaming; complete back reaming/reaming; maintain equipment; and diagnose and respond to problems.
Standard-setting body:
Install product pipe in a drilling environment
This standard has expired and is no longer available.
Version 3
22490 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB303D. People credited with this standard are able to: plan and prepare for installation of product pipe; install product pipe; maintain equipment; and respond to problems.
Standard-setting body:
Conduct mud rotary drilling
Version 3
22491 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB311D. People credited with this standard are able to: plan and prepare for mud rotary drilling; operate mud rotary drill; operate fluid system; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct raise boring
This standard has expired and is no longer available.
Version 3
22492 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB312D. People credited with this standard are able to: plan and prepare for raise boring; locate collar and drill pilot hole; drill and monitor progress of pilot hole; ream raise bore; respond to problems; and complete equipment maintenance and housekeeping.
Standard-setting body:
Conduct cable tool drilling
Version 3
22493 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB313D. People credited with this standard are able to: plan and prepare for cable tool drilling; operate cable tool drill; operate drill fluid system; recover formation samples; respond to problems; and maintain equipment, and complete equipment maintenance, and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct down-hole hammer drilling
Version 3
22494 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIBHD305D. People credited with this standard are able to: plan and prepare for down-hole hammer drilling; operate down hole hammer drill; use drilling fluids; maintain equipment; and respond to problems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct top-hole hammer drilling
Version 3
22495 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB315D. People credited with this standard are able to: plan and prepare for top-hole hammer drilling; operate top-hole hammer drill; use drilling fluids as required; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Respond to local emergencies and incidents in a drilling environment
Version 2
28315 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIERR302E. People credited with this standard are able to: plan and prepare to respond to local emergency or incident; respond to local emergency or incident; and support formal relief and debrief.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct underground in-seam directional drilling
This standard has expired and is no longer available.
Version 2
28316 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB316D. People credited with this standard are able to: plan and prepare for underground in-seam directional drilling; calibrate and operate survey tool; drill hole; complete documents and report; and complete equipment maintenance and housekeeping.
Standard-setting body:
Install underground in-seam directional drilling standpipes
This standard has expired and is no longer available.
Version 2
28317 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB317D. People credited with this standard are able to: plan and prepare for installing underground in-seam directional drilling standpipe; perform rib consolidation; drill and ream hole and install standpipe; and complete equipment maintenance and housekeeping.
Standard-setting body:
Conduct horizontal directional drilling
This standard has expired and is no longer available.
Version 2
28318 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB323D. People credited with this standard are able to: plan and prepare for horizontal directional drilling; bore pilot hole; complete equipment maintenance and housekeeping; and respond to problems.
Standard-setting body:
Carry out grouting or cementing operations in a drilling environment
Version 2
28319 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB324D. People credited with this standard are able to: plan and prepare for the grouting or cementing process; perform measurement and calculations; conduct grouting or cementing of hole; respond to problems; and complete equipment maintenance and housekeeping.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up and prepare for open-cut drilling operations
This standard has expired and is no longer available.
Version 2
28320 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIBHD304D. People credited with this standard are able to: prepare drilling site; mark out drill pattern; and move equipment and materials to pattern.
Standard-setting body:
Apply effective coal seam gas control practices in a drilling environment
This standard has expired and is no longer available.
Version 2
28332 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD304D. People credited with this standard are able to: plan and prepare for operations for applying effective coal seam gas control practices; apply coal seam gas control strategies; coordinate with coal seam gas control crew activities; operate and monitor coal seam gas control equipment and processes; apply coal seam gas kill procedures; and conduct housekeeping activities.
Standard-setting body:
Apply blow out prevention operational procedures in a drilling environment
Version 3
28333 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD305D. People credited with this standard are able to: plan and prepare for applying blow out prevention operational procedures; apply coal seam gas control strategies; coordinate coal seam gas control crew activities; operate and monitor coal seam gas control equipment and processes; apply coal seam gas kill procedures; and conduct housekeeping activities.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Manage non-routine, complex, technical situations in a drilling environment
This standard has expired and is no longer available.
Version 3
22496 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIBEF401D. People credited with this standard are able to: collect and analyse information; diagnose and solve complex problems; manage non-routine/complex technical operations; and use technology effectively.
Standard-setting body:
Plan and supervise the mobilisation of equipment, crew, and materials in a drilling environment
This standard has expired and is no longer available.
Version 3
22497 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB401D. People credited with this standard are able to: plan and prepare for supervising the mobilisation of equipment, crew, and materials; plan hazard control procedures; select and source equipment, services, and supplies needed; initiate the mobilisation of the job; and monitor mobilisation (including loading) and respond to problems.
Standard-setting body:
Supervise on-site operations in a drilling environment
This standard has expired and is no longer available.
Version 3
22498 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIBEF402D. People credited with this standard are able to: manage on-site safety; communicate regularly with client, personnel, and other relevant parties; diagnose and solve routine and non-routine problems; control work program to ensure objectives are met; coordinate work of personnel; and maintain operating records.
Standard-setting body:
Conduct drilling operations
This standard has expired and is no longer available.
Version 3
23190 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD403D. People credited with this standard are able to: plan and prepare for drilling operations; commence drilling operations; maintain drilling operations; drill intermediate and/or main holes; prepare for hole abandonment; and conduct housekeeping activities.
Standard-setting body:
Manage drilling induction and orientation
This standard has expired and is no longer available.
Version 3
23204 Coversheet 6 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIOGD505D. People credited with this standard are able to: plan and prepare to manage drilling induction and orientation; examine general safety practices; and communicate first aid/emergency response arrangements.
Standard-setting body:
Implement and maintain management systems to control risk in a drilling workplace
This standard has expired and is no longer available.
Version 3
23209 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIRIS501D. People credited with this standard are able to: plan and prepare to develop the framework for the risk management system; develop the processes to support the risk management system; plan and implement the risk management system; and monitor, review and update the risk management processes.
Standard-setting body:
Implement and maintain environmental management plan in a drilling environment
This standard has expired and is no longer available.
Version 2
28321 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIENV501D. People credited with this standard are able to: plan and prepare for the implementation and maintenance of environmental management plan; develop processes to support the environmental management plan; prepare and implement the plan; and monitor, review and update the environmental management processes.
Standard-setting body:
Apply a quality management system on site in a drilling environment
This standard has expired and is no longer available.
Version 2
28322 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIQUA401D. People credited with this standard are able to: implement quality processes; make recommendations based on performance that has been monitored and reported on; and consolidate opportunities for further development.
Standard-setting body:
Manage major incidents and emergencies in a drilling environment
This standard has expired and is no longer available.
Version 2
28323 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIERR504D. People credited with this standard are able to: plan and prepare to manage major incidents and emergencies; manage the incident/ emergency response; access and respond to information, advice and support; apply post-incident management procedures; and audit and review the effectiveness of the incident/emergency management response.
Standard-setting body:
Apply and monitor surface operations emergency preparedness and response systems in a drilling environment
This standard has expired and is no longer available.
Version 2
28324 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIERR401D. People credited with this standard are able to: plan and prepare for the application of the emergency preparedness and response systems; apply the emergency preparedness and response plan; and apply routine emergency preparedness and response plan routine maintenance procedures.
Standard-setting body:
Supervise surface directional drilling operations
This standard has expired and is no longer available.
Version 2
28325 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB410D. People credited with this standard are able to: plan and prepare for supervising surface directional drilling operations; initiate operations; and monitor, adjust, communicate and report on the operations.
Standard-setting body:
Supervise underground in-seam directional drilling operations
This standard has expired and is no longer available.
Version 2
28326 Coversheet 40 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIINHB413D. People credited with this standard are able to: plan and prepare for supervising underground in-seam directional drilling operations; initiate underground in-seam directional drilling operations; and monitor, adjust, communicate and report on the execution of underground in-seam directional drilling operations.
Standard-setting body:
Apply site plant, equipment, and infrastructure maintenance plan in a drilling environment
This standard has expired and is no longer available.
Version 2
28327 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIISAM401D. People credited with this standard are able to: plan and prepare for application of the site plant, equipment, and infrastructure maintenance management plan; and monitor, adjust, and report on execution of the maintenance management plan.
Standard-setting body:
Data as at 2024-04-25 23:01:13.2