Domain - Can Making
TOP > Manufacturing > Manufacturing Skills > Can Making
| 0 Qualifications | 19 Assessment Standards (19 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Set a mechanically automated, inclinable eccentric press to press steel can components
This standard has expired and is no longer available.
Version 3
18318 Unit Standard 18 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of mechanically automated, inclinable eccentric presses with pillared compound tooling used to press steel can components from blanks or pre-cut strips of tinned plate fed automatically from a magazine, with pressing capacities up to 40 tonnes and operating speeds up to 154 parts per minute. People credited with this unit standard are able to: remove and store compound tooling from; change the setup; test run; and perform quality control checks on product from, a mechanically automated, inclinable eccentric press.
Standard-setting body:
Set an automated curling machine to curl the outer edge of steel can components
This standard has expired and is no longer available.
Version 3
18319 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of automatic curlers used to curl the outer edge of steel can components such as rings, lids or hard ends, installed downstream of a press and operated as an integral part of a steel can component manufacturing process. People credited with this unit standard are able to: change the setup on; test run; and perform quality control checks on product from, an automated curling machine.
Standard-setting body:
Set an automatic lining machine to apply sealing compound to steel can components
This standard has expired and is no longer available.
Version 3
18321 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of automatic lining machines of capacities up to 500 parts per minute to apply sealing compounds to steel can components fed automatically. Compound applicator guns may be mechanically operated, electrically operated with coil and stepping motor, or electropnuematically operated. People credited with this unit standard are able to: check sealing compound and fill a sealing compound tank; dismantle and assemble sealing compound application guns; set sealing compound application guns; perform a setup; test run; and perform quality control checks on product from an automatic lining machine.
Standard-setting body:
Set a mechanically automated scroll shear to cut steel sheets into scrolled strips
This standard has expired and is no longer available.
Version 3
18323 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of mechanically automated scroll shears to cut sheets of steel up to 1040 mm x 1040 mm x 0.4 mm in size, fed automatically from a magazine, into scrolled strips with cutting capacity up to 105 strokes per minute and cutting power of up to 16 tonnes. People credited with this unit standard are able to: set a mechanically automated scroll shear for plate size; test run; and perform quality control checks on a product from a mechanically automated scroll shear.
Standard-setting body:
Set a mechanically automated slitter to cut sheets of steel into strips or blanks
This standard has expired and is no longer available.
Version 3
18324 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of mechanically automated slitters used for slitting sheets of tinplate up to 1000 mm x 1000 mm x 0.4 mm in size, fed automatically from a magazine, into strips or blanks with cutting speeds up to 1.6 m/s and capacities up to 60 sheets per minute. People credited with this unit standard are able to: prepare a slitter for setting of plate size; set a slitter for plate size; test run a slitter; and perform quality control checks on product from a mechanically automated slitter.
Standard-setting body:
Set an automated electrostatic lubricant applicator to lubricate sheets of tinplate
This standard has expired and is no longer available.
Version 3
18325 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of automatic, electrostatic lubricant applicators to lubricate sheets of tinplate in order to extend the working life of compound tooling in presses and to reduce damage to print decoration and finish. People credited with this unit standard are able to: set up and adjust an automated electrostatic lubricant applicator to lubricate sheets of tinplate; test run; and perform quality control checks on product from, an automated electrostatic lubricant applicator.
Standard-setting body:
Set an automated assembler machine to assemble steel can rings, lids, and aluminium foil
This standard has expired and is no longer available.
Version 3
18326 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of can automatic component assembly machines to assemble steel can rings, lids, and aluminium foil via a five-stage assembly process: separation of lids and rings from their hoppers; pressing of lids into rings; feeding of aluminium foil, cutting of aluminium foil and pressing into rings and lids; and removal of finished ring, lid and foil (RLF) assemblies. People credited with this unit standard are able to: change an automated can component assembler embosser; perform a setup on; test run; and perform quality control checks on the operation of, an automated can component assembler machine.
Standard-setting body:
Set up and monitor an automated can body necking machine
This standard has expired and is no longer available.
Version 3
18327 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the operation of necking machines used to neck one end of a can body.
Standard-setting body:
Set an automated tester machine to vacuum test a finished can
This standard has expired and is no longer available.
Version 3
18329 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of automatic testers used to test assembled cans by means of vacuum to check the manufacturing process. People credited with this unit standard are able to: perform a setup on a tester machine; test run a tester machine; and perform quality control checks on the operation of an automated tester machine.
Standard-setting body:
Set up and monitor an automated can body parting machine
This standard has expired and is no longer available.
Version 3
18330 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard covers setting and monitoring of automated can body parting machines which comprise an infeed system, a parting tool, and an outfeed system. People credited with this unit standard are able to: perform a height changeover on, and test run and monitor, an automated can body parting machine.
Standard-setting body:
Set up and monitor an automated can body flanger
This standard has expired and is no longer available.
Version 3
18331 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers setting and monitoring of automated die or spin flangers used to flange the ends of tinplate can bodies so that the ends can be seamed. People credited with this unit standard are able to: perform a setup on; test run and monitor; and perform quality control checks on product from, an automated can body flanger.
Standard-setting body:
Set up and monitor an automated can body beader
This standard has expired and is no longer available.
Version 3
18332 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers setting and monitoring of automated beading machines used to bead can bodies to strengthen them. People credited with this unit standard are able to: perform a setup on; test run and monitor; and perform quality control checks on product from, an automated can body beader.
Standard-setting body:
Set up and monitor the automatic application of a powder stripe to internal cylindrical seam welds
This standard has expired and is no longer available.
Version 3
18333 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers setting and monitoring of a system which automatically applies a stripe of powder particles through an electrostatic field to the internal surface of a can body seam weld. Such a system is comprised of a powder feed unit, powder application arm, powder heating and cooling (curing), and surplus powder recovery. People credited with this unit standard are able to: set up, monitor, and adjust an automated internal powder stripe applicator.
Standard-setting body:
Set up and monitor an automated can component seamer
This standard has expired and is no longer available.
Version 3
18335 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers setting and monitoring of automated seaming machines used for double seaming of can components. People credited with this unit standard are able to: perform a setup on; test run and monitor; and perform quality control checks on product from, an automated can component seamer.
Standard-setting body:
Level 4
Set a high-speed, mechanically automated eccentric press to press steel can components
This standard has expired and is no longer available.
Version 3
18320 Unit Standard 24 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of high speed mechanically automated, inclinable eccentric presses with double head pillared compound tooling and twin kickers, twin knockouts and twin curlers, used to press steel can components from scrolled or square cut strips fed automatically from a magazine, with pressing capacities up to 25 tonnes and operating speeds up to 500 parts per minute. People credited with this unit standard are able to: remove and store double compound tooling from; install double compound tooling to; test run; and perform quality control checks on product from a high-speed, mechanically automated eccentric press.
Standard-setting body:
Set a computer controlled, vertical eccentric press to press can components from steel sheets
This standard has expired and is no longer available.
Version 3
18322 Unit Standard 18 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting of computer controlled, vertical eccentric presses with pillarless compound tooling used to press steel can components from sheets of steel plate fed automatically from a magazine, with pressing capacities up to 15 tonnes and operating speeds up to 200 parts per minute. People credited with this unit standard are able to: remove compound tooling from; fit compound tooling to; test run; perform a size change on; and perform quality control checks on product from, a computer controlled, vertical eccentric press.
Standard-setting body:
Set up and monitor an automated tinplate seam welding machine
This standard has expired and is no longer available.
Version 3
18328 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers setting and monitoring of fully automated tinplate seam welding machines which comprise automated feeding, flexing, roll-forming, body conveying and seam welding to form a single module. People credited with this unit standard are able to: prepare an automated tinplate seam welder for a changeover; perform a changeover on; test run and monitor; and perform quality control checks on product from, an automated tinplate seam welder.
Standard-setting body:
Evaluate double seaming of can components and diagnose double seam faults
This standard has expired and is no longer available.
Version 3
18334 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers evaluation and diagnoses of the double seaming of can bodies and end components. People credited with this unit standard are able to: identify and explain double seam geometry and dimensions; explain double seam formation; evaluate a double seam; and diagnose double seam faults.
Standard-setting body:
Control can making processes and trial product variations
This standard has expired and is no longer available.
Version 5
4812 Unit Standard 40 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to control can making processes, and trial product variations on an existing can making process.
Standard-setting body:
Data as at 2024-04-26 23:01:12.72