Domain - Fire Detection and Alarm Systems
TOP > Engineering and Technology > Mechanical Engineering > Fire Detection and Alarm Systems
| 0 Qualifications | 47 Assessment Standards (47 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge, use, and care of tools and test equipment used in the fire detection and alarm industry sector
Version 2
28814 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers the knowledge of knowledge of tools, and test equipment used in the fire alarm industry sector, and their correct use and precautions. People credited with this unit standard are able to: demonstrate knowledge of and take measurements using test instruments used in the fire detection and alarm system industry sector; select and use simple measuring devices used in the fire detection and alarm system industry sector; select, use, and care for engineering hand tools used in the fire detection and alarm system industry sector; select, use, and care for portable hand held engineering power tools used in the fire detection and alarm system industry sector.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate knowledge of conventional detection and alarm systems and installation practices
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 17719, and unit standard 17723 have been replaced by unit standard 23258. This unit standard, unit standard 17719, unit standard 18435, unit standard 18436, and unit standard 18437, replaced unit standard 9383, unit stan
17718 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: input and output devices for a conventional fire detection and alarm system; control equipment for a conventional fire detection and alarm system; wiring installation requirements and procedures applicable to a conventional fire detection and alarm system; requirements for electrical connections and terminations applicable to a conventional fire detection and alarm system; and testing requirements and procedures for a conventional fire detection and alarm system installation.
Standard-setting body:
Demonstrate knowledge of inspection and testing for conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 17722 have been replaced by unit standard 23259.
17721 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of testing requirements and procedures for a conventional fire detection and alarm system; demonstrate knowledge of inspection requirements and procedures for a conventional fire detection and alarm system; identify and state the purpose of documentation required for inspection and testing of a conventional fire detection and alarm system; explain how to prepare for inspection and testing of a conventional fire detection and alarm system; and describe the completion of documentation required for reporting after the inspection and testing of a conventional fire detection and alarm system.
Standard-setting body:
Test conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 9394, unit standard 9396, and unit standard 17717 have been replaced by unit standard 23262.
17725 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare for testing a conventional fire detection and alarm system; check and test a conventional fire detection and alarm system, and thereafter reinstate the system to operational status; and complete documentation for reporting after testing a conventional fire detection and alarm system.
Standard-setting body:
Install input and output devices for fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 18436, and unit standard 18437 have been replaced by unit standard 23260. This unit standard, unit standard 17718, unit standard 17719, unit standard 18436, and unit standard 18437 replaced unit standard 9383, unit stand
18435 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of input and output devices for fire detection and alarm systems; prepare for installation of system devices; receive, identify, and install devices; and complete documentation for installation.
Standard-setting body:
Install control equipment for conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 18435, and unit standard 18437 have been replaced by unit standard 23260. This unit standard, unit standard 17718, unit standard 17719, unit standard 18435, and unit standard 18437 replaced unit standard 9383, unit stand
18436 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of control equipment for conventional fire detection and alarm systems; prepare for installation of control equipment; receive, identify, and install control equipment; and complete documentation for installation.
Standard-setting body:
Demonstrate knowledge of fire detection and alarm systems and installation practices
Version 3 This unit standard replaced unit standard 17718, unit standard 17719, and unit standard 17723.
23258 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers knowledge of operating principles and installation practices of fire detection and alarm systems using both conventional and addressable devices. People credited with this unit standard are able to demonstrate knowledge of: . legislation, standards, and codes for fire detection and alarm systems, including installation considerations; . conventional control equipment for fire detection and alarm systems installation; . addressable fire detection and alarm systems, including installation considerations; . gaseous suppression systems installation; . wiring requirements and procedures for fire detection and alarm systems installation; . commissioning tests and procedures for fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of checking and testing of fire detection and alarm systems
Version 3 This unit standard replaced unit standard 17721 and unit standard 17722.
23259 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians, and covers the underpinning knowledge needed for the performance of monthly and annual checks and tests in accordance with standard NZS 4512:2021, Part 6. Both conventional and addressable devices are included. People credited with this unit standard are able to demonstrate knowledge of: . general requirements for maintaining fire detection and alarm systems in compliance and good working order; . monthly checks and tests for fire detection and alarm systems; . annual checks and tests for fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of fire detection and alarm system components and installation practices
Version 2
28813 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers the knowledge of fire detection and alarm system components, their principles of operation, installation practices, wiring and cabling principles, ducting and cable securing/supports, electrostatic discharge (ESD) and precautions. People credited with this unit standard are able to demonstrate knowledge of: . principle of operation of major components of fire detection and alarm systems; . component symbols and fire detection and alarm system drawings; . cabling systems used in fire detection and alarm system installation practices; . fasteners commonly used in the installation of fire detection and alarm system components; . fire alarm and detection system component and cable installation practices; . electrostatic discharge (ESD).
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Install fire detection and alarm system components under supervision
Version 2
28815 Unit Standard 30 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers installation of fire detection and alarm system components, wiring and cabling, cable support systems, racks, and battery chargers in accordance with standard NZS 4512:2021, Part 4. People credited with this unit standard are, under supervision, able to: plan and prepare for installation of fire detection and alarm system components; install cabling; install fire detection and alarm components; and complete installation documentation and reporting.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of commissioning tests and procedures for special hazards fire detection and alarm systems
Version 2
28817 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers knowledge of commissioning of special hazards fire detection and alarm systems. People credited with this unit standard are able to demonstrate knowledge of commissioning tests and procedures for special hazards fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and test Type 1 emergency warning systems
This standard has expired and is no longer available.
Version 3
9399 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare for inspection and testing of emergency warning system, and inspect and test system, and complete documentation.
Standard-setting body:
Level 4
Inspect analogue addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 17720, and unit standard 17726 have been replaced by unit standard 23264.
17716 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to inspect and survey an analogue addressable fire detection and alarm system; inspect and survey an analogue addressable fire detection and alarm system, and thereafter reinstate the system to operational status; and complete documentation for reporting after inspecting an analogue addressable fire detection and alarm system.
Standard-setting body:
Test analogue addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 9394, unit standard 9396, and unit standard 17725 have been replaced by unit standard 23262.
17717 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare for testing an analogue addressable fire detection and alarm system; check and test an analogue addressable fire detection and alarm system, and thereafter reinstate the system to operational status; and complete documentation for reporting after testing an analogue addressable fire detection and alarm system.
Standard-setting body:
Demonstrate knowledge of analogue addressable detection and alarm systems and installation practices
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 17718, and unit standard 17723 have been replaced by unit standard 23258. This unit standard, unit standard 17718, unit standard 18435, unit standard 18436, and unit standard 18437, replaced unit standard 9383, unit stan
17719 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: input and output devices for analogue an addressable fire detection and alarm system; control equipment for an analogue addressable fire detection and alarm system; wiring installation requirements and procedures applicable to an analogue addressable fire detection and alarm system; requirements for electrical connections and terminations applicable to an analogue addressable fire detection and alarm system; and testing requirements and procedures for an analogue addressable fire detection and alarm system installation.
Standard-setting body:
Inspect conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 17716, and unit standard 17726 have been replaced by unit standard 23264.
17720 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to inspect and survey a conventional fire detection and alarm system; inspect and survey a conventional fire detection and alarm system, and thereafter reinstate the system to operational status; and complete documentation for reporting after inspecting a conventional fire detection and alarm system.
Standard-setting body:
Demonstrate knowledge of inspection and testing for analogue addressable fire alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 17721 have been replaced by unit standard 23259.
17722 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of testing requirements and procedures for an analogue addressable fire detection and alarm system; demonstrate knowledge of inspection requirements and procedures for an analogue addressable fire detection and alarm system; identify and state the purpose of documentation required for inspection and testing of an analogue addressable fire detection and alarm system; explain how to prepare for inspection and testing of an analogue addressable fire detection and alarm system; and describe the completion of documentation required for reporting after the inspection and testing of an analogue addressable fire detection and alarm system.
Standard-setting body:
Demonstrate knowledge of special hazard actuation systems and installation practices
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 17718, and unit standard 17719 have been replaced by unit standard 23258.
17723 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: input and output devices for a special hazard actuation system; control equipment for a special hazard actuation system; wiring installation requirements and procedures applicable to a special hazard actuation system; requirements for electrical connections and terminations applicable to a special hazard actuation system; and testing requirements and procedures for a special hazard actuation system installation.
Standard-setting body:
Install control equipment for addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 18435, and unit standard 18436 have been replaced by unit standard 23260. This unit standard, unit standard 17718, unit standard 17719, unit standard 18435, and unit standard 18436 replaced unit standard 9383, unit stand
18437 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of control equipment for addressable fire detection and alarm systems; prepare for installation of control equipment; receive, identify, and install control equipment; and complete documentation for installation.
Standard-setting body:
Install fire detection and alarm systems
Version 3 This unit standard replaced unit standard 18435, unit standard 18436, and unit standard 18437.
23260 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers installation of fire detection and alarm systems in accordance with standard NZS 4512:2021, Part 4. People credited with this unit standard are able to: plan and prepare for installations of fire detection and alarm systems; install cabling of fire detection and alarm systems; install fire detection and alarm system components; complete installation documentation for fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Commission fire detection and alarm systems
Version 3 This unit standard replaced unit standard 9386, unit standard 9387, unit standard 9388, and unit standard 9389.
23261 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers commissioning of fire detection and alarm systems in accordance with standard NZS 4512:2021, Part 5. People credited with this unit standard are able to: prepare for commissioning of fire detection and alarm systems; commission fire detection and alarm systems; and complete documentation and handover of fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Check, test, and inspect fire detection and alarm systems
Version 3 This unit standard replaced unit standard 9394, unit standard 9396, unit standard 17717, and unit standard 17725.
23262 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians, and covers monthly checking and testing and annual checking, testing, and inspection (surveys) of fire detection and alarm systems in accordance with standard NZS 4512:2021, Part 6. People credited with this unit standard are able to prepare for and conduct checks, tests, and inspections of fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Check, test, and inspect special hazards fire detection and alarm systems
Version 3 This unit standard replaced unit standard 9395.
23263 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers monthly checking and testing and annual checking, testing, and inspection (surveys) of special hazards fire detection and alarm systems in accordance with standard NZS 4512:2021 and standards relevant to special hazards systems fire detection and alarm systems. People credited with this unit standard are able to prepare for and conduct checks, tests, and inspections of special hazards fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service fire detection and alarm systems
Version 4 This unit standard replaced unit standard 9390, unit standard 9391, unit standard 9392, and unit standard 9393.
23265 Unit Standard 30 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers servicing of fire detection and alarm systems and special hazards fire detection and alarm systems. People credited with this unit standard are able to: prepare to service fire detection and alarm systems; service fire detection and alarm systems; document results of servicing of fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of special hazards fire detection and alarm systems and installation practices
Version 2
28816 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers knowledge of operating principles and installation practices of special hazards fire detection and alarm systems. People credited with this unit standard are able to demonstrate knowledge of: . legislation, standards, and codes relevant to the installation of special hazards fire detection and alarm systems. . input and output devices for special hazards fire detection and alarm systems. . conventional control equipment for special hazards fire detection and alarm systems. . addressable special hazards fire detection and alarm systems. . special hazards fire detection and alarm systems. . wiring requirements and procedures for special hazards fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Install special hazards fire detection and alarm systems
Version 2
28818 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers installation of special hazards fire detection and alarm systems in accordance with standard NZS 4512:2021, Part 4 and other relevant and accepted standards. People credited with this unit standard are able to: plan and prepare for installation of special hazards fire detection and alarm systems; install cabling for special hazards fire detection and alarm systems; install special hazards fire detection and alarm systems; complete installation documentation for special hazards fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Commission special hazards fire detection and alarm systems
Version 2
28819 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers commissioning of special hazards fire detection and alarm systems in accordance with standard NZS 4512:2010 and other relevant and accepted standards. People credited with this unit standard are able to: prepare for commissioning of special hazards fire detection and alarm systems; conduct examination and tests for special hazards fire detection and alarm systems; and complete documentation and handover for special hazards fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Pre-commission conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9387, unit standard 9388, and unit standard 9389 have been replaced by unit standard 23261.
9386 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of conventional fire detection and alarm systems; prepare for the pre-commissioning of conventional system; complete pre-commissioning of the system; and record and analyse test results for the system.
Standard-setting body:
Commission conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9386, unit standard 9387, and unit standard 9389 have been replaced by unit standard 23261.
9388 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of conventional fire detection and alarm systems; prepare for the commissioning; commission the system; and complete documentation and inform customer.
Standard-setting body:
Inspect and test fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9396, unit standard 17717, and unit standard 17725 have been replaced by unit standard 23262.
9394 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of fire detection and alarm systems; prepare for inspection and testing of system; and inspect and test system, and complete documentation.
Standard-setting body:
Level 5
Design addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9398 and unit standard 17724 have been replaced by unit standard 23266 and unit standard 23267.
10924 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of addressable fire detection and alarm systems; prepare to design system; and design fire protection and alarm system.
Standard-setting body:
Demonstrate knowledge of, and apply standards and documentation for fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 9398, and unit standard 10924 have been replaced by unit standard 23266 and unit standard 23267.
17724 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard covers knowledge and application of standards, and referenced documents intended for use in the training of technicians and certifiers of fire detection and alarm systems. People credited with this unit standard are able to demonstrate knowledge of, and apply: NZ Standard 4512 Fire Alarm Systems in Buildings, and referenced documentation to the installation of fire detection and alarm systems.
Standard-setting body:
Certify fire detection and alarm systems
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 17716, and unit standard 17720 have been replaced by unit standard 23264.
17726 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare for certification of conventional and analogue addressable fire detection and alarm systems; certify conventional and analogue addressable fire detection and alarm systems; and complete documentation for reporting after certification of conventional and analogue addressable fire detection and alarm systems.
Standard-setting body:
Inspect fire detection and alarm systems for compliance
Version 3 This unit standard replaced unit standard 17716, unit standard 17720, and unit standard 17726.
23264 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians who wish to become inspection personnel required to inspect fire detection and alarm systems for compliance with standard NZS 4512:2021. Systems may use conventional or addressable devices, and include special hazards fire detection and alarm systems. People credited with this unit standard are able to: prepare for inspections of fire detection and alarm systems; inspect fire detection and alarm systems; and complete inspection documentation of fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of fire detection and alarm system design
Version 3 This unit standard and unit standard 23267 replaced unit standard 9398, unit standard 10924, and unit standard 17724.
23266 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers knowledge of the principles of design of fire detection and alarm systems, using both conventional and addressable devices. People credited with this unit standard are able to: demonstrate knowledge of legislation, standards, codes of practice, and job specific documentation relating to fire detection and alarm systems; and design fire detection and alarm systems for given simulated situations.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Design fire detection and alarm systems
Version 3 This unit standard and unit standard 23266 replaced unit standard 9398, unit standard 10924, and unit standard 17724.
23267 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of fire alarm technicians and covers the design of fire detection and alarm systems, using both conventional and addressable devices. People credited with this unit standard are able to: prepare to design fire detection and alarm systems; design fire detection and alarm systems; and prepare drawings and project design for the installation of fire detection and alarm systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Pre-commission addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9386, unit standard 9388, and unit standard 9389 have been replaced by unit standard 23261.
9387 Unit Standard 22 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of addressable fire detection and alarm systems; prepare for the pre-commissioning of addressable system; complete pre-commissioning of the system; and record and analyse test results for the system.
Standard-setting body:
Commission addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9386, unit standard 9387, and unit standard 9388 have been replaced by unit standard 23261.
9389 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of addressable fire detection and alarm systems; prepare for the commissioning; commission the system; and complete documentation and inform customer.
Standard-setting body:
Service conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9391, unit standard 9392, and unit standard 9393 have been replaced by unit standard 23265.
9390 Unit Standard 28 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of conventional fire detection and alarm systems; prepare for work on the system; service the system; and complete documentation for the work.
Standard-setting body:
Service addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 4 This unit standard, unit standard 9390, unit standard 9392, and unit standard 9393 have been replaced by unit standard 23265.
9391 Unit Standard 30 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of addressable fire detection and alarm systems; prepare for work on the system; service the system; and complete documentation for the work.
Standard-setting body:
Service special hazard alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9390, unit standard 9391, and unit standard 9393 have been replaced by unit standard 23265.
9392 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of special hazard alarm systems; prepare for work on the system; service the system; and complete documentation for the work.
Standard-setting body:
Service emergency warning and intercommunication systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9390, unit standard 9391, and unit standard 9392 have been replaced by unit standard 23265.
9393 Unit Standard 13 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of emergency warning and intercommunication systems; prepare for work on the system; service the system; and complete documentation for the work.
Standard-setting body:
Inspect and test special fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard has been replaced by unit standard 23263.
9395 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of special fire detection and alarm systems; prepare for inspection and testing of system; and inspect and test system, and complete documentation.
Standard-setting body:
Survey fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 9394, unit standard 17717, and unit standard 17725 have been replaced by unit standard 23262.
9396 Unit Standard 30 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of fire detection and alarm systems; prepare for survey of the system; and survey the system and complete documentation.
Standard-setting body:
Establish performance requirements for conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 3
9397 Unit Standard 16 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of conventional fire detection and alarm systems; prepare to establish requirements for system; and establish performance requirements for system.
Standard-setting body:
Design conventional fire detection and alarm systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 10924, and unit standard 17724 have been replaced by unit standard 23266 and unit standard 23267.
9398 Unit Standard 22 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of conventional fire detection and alarm systems; prepare to design system; and design fire protection and alarm system.
Standard-setting body:
Level 6
Establish performance requirements for addressable fire detection and alarm systems
This standard has expired and is no longer available.
Version 3
10923 Unit Standard 18 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of addressable fire detection and alarm systems; prepare to establish requirements for system; and establish performance requirements for system.
Standard-setting body:
Data as at 2025-05-01 23:01:07.45