Domain - Tyres
TOP > Engineering and Technology > Motor Industry > Tyres
| 0 Qualifications | 24 Assessment Standards (24 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Balance a wheel off a vehicle in the motor industry
Version 2 This unit standard and unit standard 21869 replaced unit standard 238 and unit standard 3863.
21722 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare a vehicle wheel for balancing; and balance a wheel and tyre assembly off a vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and replace wheels and tyres, and balance wheels
This standard has expired and is no longer available.
Version 10
238 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to: remove and replace a wheel; interchange the wheels; determine the serviceability of a wheel and tyre; and balance a wheel and tyre assembly.
Standard-setting body:
Level 3
Repair and refit heavy vehicle tyres
Version 4
11739 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to remove wheels from heavy vehicles; remove heavy vehicle tyres from wheels; repair punctured tubes from heavy vehicles; repair punctured tubeless tyres from heavy vehicles; refit heavy vehicle tubed tyres to wheels; refit heavy vehicle tubeless tyres to wheels; and refit wheels to heavy vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and replace wheels and tyres from industrial machines and equipment
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 11741 have been replaced by unit standard 24461 and unit standard 24462.
11742 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the tyre repair industry. People credited with this unit standard are able to: demonstrate knowledge of industrial tyres; remove wheels from industrial machines and/or equipment; remove industrial pneumatic tyres from wheels and replace them; remove and fit industrial cushion solid type (resilient) tyres; and refit wheels to industrial machines and/or equipment.
Standard-setting body:
Repair punctures and fit tyres to motorcycle wheels
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2327 have been replaced by unit standard 24403, unit standard 24404, and unit standard 24405.
15472 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in motorcycle engineering workshops and tyre fitting bays. People credited with this unit standard are able to demonstrate knowledge of fitting and repairing motorcycle tyres and inspecting wheels, and repair a puncture in a motorcycle tube and tubeless tyre.
Standard-setting body:
Demonstrate knowledge of competition tyres and their applications for motorsport events
This standard has expired and is no longer available.
Version 2
23813 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of types of competition tyres; and tyre applications, handling, and the effect of motorsport regulations on tyre selection.
Standard-setting body:
Repair punctures and fit tyres to motorcycle and all-terrain vehicle (ATV) wheels
Version 1 This unit standard, unit standard 24403, and unit standard 24404 replaced unit standard 2327 and unit standard 15472.
24405 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in motorcycle engineering workshops and tyre fitting bays. People credited with this unit standard are able to repair punctures and fit tyres to motorcycle and ATV wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of light vehicle tyres and wheels
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 30567. This unit standard and unit 24458 replaced unit standard 916 and unit standard 9074.
24457 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in the motor industry. People credited with this unit standard are able to demonstrate knowledge of: light vehicle tyre legislation and standards; light vehicle tyres, types and sizes; tyre abnormalities and demounting and remounting tyres; and light vehicle wheels.
Standard-setting body:
Prepare to repair, and repair punctures in tubes and tubeless tyres on light vehicles
Version 2 This unit standard and unit standard 24457 replaced unit standard 916 and unit standard 9074.
24458 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to repair, and repair, a puncture in a tube and in a tubeless tyre from a light vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of tractor and agricultural machinery tyres and wheels
Version 2 This unit standard and unit standard 24460 replaced unit standard 5440.
24459 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: tractor and agricultural machinery tyre types and sizes; tyre damage, repair techniques, and maintenance requirements; and tractor and agricultural machinery wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and refit wheels from tractors and agricultural machinery
Version 2 This unit standard and unit standard 24459 replaced unit standard 5440.
24460 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove wheels from, and refit wheels to, tractor and agricultural machinery.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of heavy vehicle tyres and wheels
Version 2
24463 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people employed or starting work in automotive heavy transport and tyre industries. People credited with this unit standard are able to demonstrate knowledge of: heavy vehicle tyres, types and sizes; abnormal tyre wear on heavy vehicles; hazards associated with heavy vehicle tyres; heavy vehicle wheels; tyre repair techniques and maintenance requirements; and can describe inspection checks for tyres and wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive tyres and wheels
Version 1 This unit standard replaced unit standard 24457.
30567 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of automotive tyres and wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of common heavy vehicle or machine tyres and wheels
Version 1
31230 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of common heavy vehicle or machine tyres and wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and refit motorcycle wheels and tyres
Version 1
31444 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove and refit motorcycle wheels and tyres.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify tyre applications for tractors and agricultural machinery, and remove and replace tyres
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24459 and unit standard 24460.
5440 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of tractor and agricultural machinery tyre types and sizes; demonstrate knowledge of tyre damage, repair techniques, and maintenance requirements; demonstrate knowledge of tractor wheels; and remove and replace tractor tyres.
Standard-setting body:
Demonstrate knowledge of, and rectify faults in, motor vehicle tyres and wheels
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 916 have been replaced by unit standard 24457 and unit standard 24458.
9074 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in the motor industry. Those credited with this unit standard are able to: demonstrate knowledge of vehicle tyre standards; demonstrate knowledge of vehicle tyres, types, and sizes; diagnose and rectify abnormalities in vehicle tyre conditions; demonstrate knowledge of vehicle wheels and rectify wheel defects.
Standard-setting body:
Repair punctures and fit tyres to wheels
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 9074 have been replaced by unit standard 24457 and unit standard 24458.
916 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in automotive engineering workshops and tyre fitting bays. People credited with this unit standard are able to demonstrate knowledge of fitting and repairing tyres and inspecting wheels, and repair a puncture in a tube and tubeless tyre.
Standard-setting body:
Level 4
Check, demount, and mount a heavy off-the-road equipment tyre
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 11742 have been replaced by unit standard 22461 and unit standard 24462.
11741 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: carry out maintenance checks on off-the-road (OTR) tyres; remove a wheel from a heavy OTR machine; demount a heavy OTR tyre from a wheel; demount a tyre from a heavy OTR machine; mount a heavy OTR tyre to a wheel; and fit a wheel to a heavy OTR machine.
Standard-setting body:
Select competition tyres for a specific motorsport event, and monitor tyre performance
This standard has expired and is no longer available.
Version 2
23814 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to select competition tyres for a specific motorsport event, and monitor tyre performance and carry out tyre maintenance during a motorsport event.
Standard-setting body:
Demonstrate knowledge of heavy machine and equipment tyres and wheels
Version 2 This unit standard and unit standard 24462 replaced unit standard 11741 and unit standard 11742.
24461 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive heavy and tyre industries. People credited with this unit standard are able to demonstrate knowledge of heavy machine and equipment tyres, types and sizes; abnormal wear on heavy machine and equipment tyres; heavy machine and equipment tyre hazards; tyre repair techniques and maintenance requirements; heavy machine and equipment wheels; and can describe inspection checks for tyres and wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Check, remove, and refit wheels and tyres from heavy machines or equipment
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 30220 and unit standard 30221. This unit standard and unit standard 24461 replaced unit standard 11741 and unit standard 11742.
24462 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the heavy equipment and tyre repair industry. People credited with this unit standard are able to: carry out maintenance checks on heavy machine or equipment tyres; remove wheels from heavy machines or equipment; remove pneumatic tyres from wheels and refit them; remove and fit industrial cushion solid type (resilient) tyres; and refit wheels to heavy machines or equipment.
Standard-setting body:
Check, remove and refit wheels from heavy machines or equipment
Version 1 This unit standard and unit standard 30221 replaced unit standard 24462.
30220 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy and tyre industry. People credited with this unit standard are able to carry out maintenance checks on heavy machine or equipment tyres, remove wheels from heavy machines or equipment and refit wheels to heavy machines or equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and refit pneumatic tyres on wheels from heavy machines or equipment
Version 1 This unit standard and unit standard 30220 replaced unit standard 24462.
30221 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy and tyre industries. People credited with this unit standard are able to remove and refit pneumatic tyres on wheels from heavy machines or equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 05 October 2024