Domain - Wood Product Manufacturing Skills
TOP > Manufacturing > Solid Wood Manufacturing > Wood Product Manufacturing Skills
| 0 Qualifications | 39 Assessment Standards (39 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of the principles of laminating in wood product manufacturing
Version 5
15056 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of laminating; the lamination process and lamination end uses; and quality control in laminating; and identify glues, and their safe handling and storage requirements.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the wood product manufacturing industry
Version 4
17964 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: wood product manufacturing operations; markets for manufactured wood products; and wood product manufacturing key performance indicators.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manually assemble wood packaging products
Version 5
18963 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of health and safety issues relevant to wood packaging product manual assembly; describe the process and prepare for wood packaging product manual assembly; and manually assemble components and sub-components into finished products.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Use and maintain portable nail or staple guns in the manufacture of wood products
Version 4
18967 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of health and safety issues relevant to the safe use of portable nail or staple guns; select and use a portable nail or staple gun to perform wood product manufacturing operations; and carry out routine maintenance of portable nail or staple guns.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Paint wood products using conventional spray techniques
Version 4
18968 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of health and safety issues relevant to the safe use of conventional spray-painting techniques; identify parts of conventional spray guns and their function and carry out routine maintenance on equipment used in spray painting; and prepare and apply surface coatings to wood products using conventional spray equipment.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Wrap wood products manually
Version 4
24607 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of manual product wrapping and wood product handling; and wrap wood product manually.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Produce components using drilling and boring machinery in wood product manufacturing
This standard has expired and is no longer available.
Version 6
17049 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of drilling and boring machinery in wood product manufacturing; prepare for component production using drilling and boring machinery; operate and maintain drilling and boring machinery to produce components in wood product manufacturing; and monitor and control the performance of drilling and boring machinery.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Produce components using mortise and tenoner in wood product manufacturing
This standard has expired and is no longer available.
Version 6
17052 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of a mortise and tenoner in wood product manufacturing; prepare for component production using a mortise and tenoner; operate and maintain a mortise and tenoner to produce components in wood product manufacturing; and monitor and control the performance of a mortise and tenoner.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Produce components using a thicknesser and overhand planer in wood product manufacturing
This standard has expired and is no longer available.
Version 6
17201 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of a thicknesser and overhand planer in wood product manufacturing; prepare for component production using a thicknesser and overhand planer; operate and maintain a thicknesser and overhand planer to produce components in wood product manufacturing; and monitor and control the performance of a thicknesser and overhand planer.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Assemble wood product components for wood product manufacturing
This standard has expired and is no longer available.
Version 6
17202 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain hazard management, and the consequences of poor assembly practices on wood product component assembly; prepare for wood product component assembly; assemble wood product components into products; and assemble wood product components into kitsets.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Sand wood products for wood product manufacturing
Version 6
17203 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the fundamentals of a sanding machine in wood product manufacturing; prepare for wood product component sanding; operate and maintain a sanding machine to sand wood products in wood product manufacturing; and monitor and control the performance of a sanding machine.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Use and maintain hand and portable power tools in a wood manufacturing operation
Version 5
17963 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: select and use hand tools to perform wood manufacturing operations; select and use portable power tools to perform wood manufacturing operations; and complete preventative maintenance of hand tools and portable power tools used to perform wood manufacturing operations.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out automated assembly of wood packaging products
This standard has expired and is no longer available.
Version 5
18964 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues relevant to wood packaging product automated assembly; prepare for automated assembly; and set up, operate, and monitor automated machinery to assemble wood packaging products.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair and maintain wood packaging products
Version 4
18965 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of health and safety issues relevant to the repair and maintenance of wood packaging products; assess damage and determine the process of repair and maintenance of wood packaging products; and carry out the repair and maintenance of faulty or damaged wood packaging product.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Construct wooden jigs for wood packaging products
Version 4
18966 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of health and safety issues relevant to carrying out the construction of wooden jigs; prepare for the construction of wooden jigs; and construct wooden jigs for wood packaging products.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manufacture and assemble cable drums
This standard has expired and is no longer available.
Version 3
19375 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of health and safety issues relevant to the manufacture and assembly of cable drums; prepare for cable drum manufacture and assembly; manufacture flange and barrel sub-components; assemble sub-components into cable drums; and repair and maintain existing cable drums.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Demonstrate knowledge of adhesive use in wood product manufacturing
Version 4
20768 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of properties of adhesives used in wood product manufacturing; describe storage and handling requirements of adhesives used in wood product manufacturing; and demonstrate knowledge adhesive failures in wood product manufacturing.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Wrap wood products using a product wrapping line
Version 4 This unit standard replaced unit standard 3593 and unit standard 10835.
21498 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of the product wrapping and product handling line; operate and maintain the product wrapping line; monitor and control the performance of the product wrapping line; and separate, store, recycle, and dispose of off-line product.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out procedures for gluing in wood product manufacturing
This standard has expired and is no longer available.
Version 3
21764 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of properties and characteristics of glue types used in finger jointing and laminating; prepare to mix and test glue; measure ingredients, mix glue, test glue samples and interpret results; describe storage, environmental, and health and safety issues for glues used in the wood product manufacturing industry.
Standard-setting body:
Operate a Computer Numerical Controlled (CNC) machine for wood product manufacture
Version 3
22990 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with operating a CNC machine for wood product manufacture; prepare a CNC machine for operation; operate a CNC machine for wood product manufacture; monitor and control the performance of a CNC machine for wood product manufacture.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Operate a paint line or booth, and describe factors affecting performance of paints for wood product manufacturing
Version 1
32253 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for wood product manufacturing: demonstrate and apply knowledge of health and safety issues relevant to the safe use of painting techniques; describe factors affecting performance of paints; perform pre-start checks and tests on a paint line or booth; operate a paint line or booth; and shut down paint line or booth.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up, maintain and clean a paint line or booth for wood product manufacturing
Version 1
32254 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for wood product manufacturing: demonstrate and apply knowledge of health and safety issues relevant to the safe use of painting techniques; set up a paint line or booth; and perform maintenance and cleaning on a paint line or booth.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Laminate straight timber for wood product manufacturing
Version 7
4548 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of hazards and safe work practices when laminating straight timber for wood product manufacturing; demonstrate knowledge of straight timber lamination; assemble dressed straight timber laminations; spread glue and lay up for straight timber lamination; press, stack and handle assembled straight timber laminated product; and monitor production of straight timber laminates and control maintenance requirements.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up and operate a multi-rip machine centre in wood product manufacturing
This standard has expired and is no longer available.
Version 7
4551 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage health and safety when setting up and operating multi-rip machine centre; demonstrate knowledge of the operating principles of the multi-rip machine centre; prepare for multi-rip machine centre operations; operate a multi-rip machine centre; and out-feed ripped timber from a multi-rip machine centre.
Standard-setting body:
Level 4
Test laminated product in wood product manufacturing
Version 5
15059 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of laminating requirements in wood product manufacturing; demonstrate knowledge of and test glue spread; carry out selection, labelling, testing, and analysis of test samples; carry out calibration of test equipment and explain calibration records.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up mortise and tenoner for wood product manufacturing
This standard has expired and is no longer available.
Version 6
17042 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of mortise and tenoner in wood product manufacturing; establish job requirements for setting up mortise and tenoner; and prepare mortise and tenoner for wood product manufacturing operations.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Set up sanding machines for wood product manufacturing
This standard has expired and is no longer available.
Version 6
17044 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of sanders in wood product manufacturing; establish job requirements for setting up sanders; and prepare sanders for wood product manufacturing operations.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Set up and prepare lathe for wood product manufacturing
This standard has expired and is no longer available.
Version 6
17046 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of lathe operation in wood product manufacturing; establish order requirements for setting up a lathe; and prepare a lathe for wood product manufacturing operations.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Set up and prepare drilling and boring machinery for wood product manufacturing
This standard has expired and is no longer available.
Version 6
17047 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of drilling and boring machinery in wood product manufacturing; establish order requirements for setting up drilling and boring machinery; and prepare drilling and boring machinery for wood product manufacturing operations.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Set up and prepare thicknessers and overhand planers for wood product manufacturing
This standard has expired and is no longer available.
Version 6
17048 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of thicknessers and overhand planers in wood product manufacturing; establish order requirements for setting up thicknessers and overhand planers; and prepare thicknessers and overhand planers for wood product manufacturing operations.
Standard-setting body:
Produce components using an overhead router in wood product manufacturing
This standard has expired and is no longer available.
Version 6
17050 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of an overhead router in wood product manufacturing; prepare for component production using an overhead router; operate and maintain an overhead router to produce products in wood product manufacturing; and monitor and control the performance of an overhead router.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Produce components using an edge-bander in wood product manufacturing
This standard has expired and is no longer available.
Version 6
17051 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of an edge-bander in wood product manufacturing; prepare for component production using an edge-bander; operate and maintain an edge-bander to produce components in wood product manufacturing; and monitor and control the performance of an edge-bander.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Produce components using a spindle moulder in wood product manufacturing
This standard has expired and is no longer available.
Version 6
17053 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of a spindle moulder in wood product manufacturing; prepare for component production using a spindle moulder; operate and maintain a spindle moulder to produce components in wood product manufacturing; and monitor and control the performance of a spindle moulder.
Standard-setting body:
Competenz - Forest Industries Training and Education Council (FITEC)
Interpret wood product specifications and establish worksite implementation
Version 3
20027 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: interpret wood product requirements; determine and order materials and equipment; plan and schedule the wood product manufacturing process; establish the production process and monitor wood product.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of glue and glue systems, and test glue systems for wood product manufacturing
Version 3
20769 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of properties, characteristics, types of glue, and glue systems used in wood manufacturing industries; test glue samples and interpret results; explain adhesive failures in wood product manufacturing; describe storage, environmental, and health and safety issues in relation to glue systems for wood product manufacturing.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Develop patterns and construct jigs for curved laminate products in wood product manufacturing
This standard has expired and is no longer available.
Version 2
20770 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with developing patterns and constructing jigs; draft full size pattern outlines from specifications and drawings for curved laminate products; and construct patterns and set up jigs for curved laminate products.
Standard-setting body:
Laminate curved products for wood product manufacturing
Version 3
20771 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of hazards and safe work practices when laminating curved products for wood product manufacturing; finger joint required lamination feedstock; check operational equipment and glue supply; laminate the curved product; and monitor production of laminated curved products and control maintenance requirements.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up, shut down and maintain a painting machine and drying equipment for wood product manufacturing
This standard has expired and is no longer available.
Version 2
21765 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain fundamentals of a painting machine in wood product manufacturing operations; establish order requirements for setting up a painting machine for wood product manufacturing operations; prepare a painting machine and drying systems for wood product manufacturing operations; shut down and maintain a painting machine and drying equipment for wood product manufacturing operations; and control paint and chemical storage and waste disposal for wood product manufacturing operations.
Standard-setting body:
Set up a Computer Numerical Controlled (CNC) machine for wood product manufacture
Version 3
22991 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with setting up a CNC machine: for wood product manufacture; prepare to set up a CNC machine for wood product manufacture; and set up a CNC machine for wood product manufacture.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-04-26 23:01:12.72