Domain - Rigging and Scaffolding Safety
TOP > Service Sector > Lifting Equipment > Rigging and Scaffolding Safety
| 0 Qualifications | 4 Assessment Standards (3 Units & 1 Skill) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Demonstrate, at height, safety procedures for the erection and dismantling of scaffolding
Version 7
20861 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - inspect scaffold to determine its readiness for erecting and dismantling the next lift, and manage risk of falling objects and establish an exclusion zone; - plan safe method for erection and dismantling of lift above; - use a safety harness for the erection of scaffolding; - prepare components on a lower lift for passing to the lift above; - safely access the lift above; - use proprietary advance guardrails for erection and dismantling scaffolding; - install guardrails progressively from working platform lift below finished working platform; and - install edge protection using tunnelling or scaffold safe zone.
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Demonstrate, at height, safety procedures for the dismantling of scaffolding
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 7
20862 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: inspect scaffolding to determine its readiness for the dismantling of the top lift; prepare equipment on a higher lift for passing to the lift below; demonstrate correct use of a safety harness for the dismantling of scaffolding; dismantle guard rails and stop ends for scaffolding; and safely access the lift below.
Standard-setting body:
Conduct a safety inspection of suspended scaffolding before use and respond to findings of inspection
Version 3
26605 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended primarily for non-professional scaffolders to assure the safe use of suspended scaffolding from which they normally work. It does not replace the legal requirement for inspections to be completed by a certificated scaffolder where necessary. People credited with this unit standard are able to: conduct a visual and a physical inspection of suspended scaffolding before use, and respond to the findings of a suspended scaffold inspection.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Level 4
Evaluate the suitability of temporary edge protection systems
Version 1
40624 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Data as at 2026-03-19 23:01:06.527