Domain - Fluid Power - Hydraulics
TOP > Engineering and Technology > Mechanical Engineering > Fluid Power - Hydraulics
| 0 Qualifications | 15 Assessment Standards (15 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Draw a diagram, and explain the operating principles, of a simple hydraulic power system
This standard has expired and is no longer available.
Version 4
17345 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to draw a diagram of, and explain the operating principles of a simple hydraulic power system.
Standard-setting body:
Shut down for maintenance, and start up, a hydraulic system
Version 4 This unit standard and unit standard 20598 replaced unit standard 2723.
20597 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to shut down a hydraulic system for maintenance, and start up a hydraulic system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Clean a hydraulic system for service
Version 4 This unit standard replaced unit standard 2724.
20599 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare a hydraulic system for cleaning, and clean a hydraulic system for service.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate knowledge of hydraulic power systems
Version 3
20611 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people training in mechanical engineering trades. People credited with this unit standard are able to demonstrate knowledge of the principles of hydraulic power; hydraulic power systems and applications; and describe hazards associated with hydraulic power systems.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Maintain a hydraulic system
Version 4 This unit standard and unit standard 20614 replaced unit standard 2722.
20613 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to maintain a hydraulic system; carry out preliminary sensory checks on a hydraulic system; maintain a hydraulic system; and return a hydraulic system to operation.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Design a hydraulic power system under supervision
This standard has expired and is no longer available.
Version 7
2725 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, under supervision, prepare to design a hydraulic power system, and design a hydraulic power system.
Standard-setting body:
Service hydraulic system components under supervision
Version 9
2727 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able, under supervision, on a hydraulic system to: prepare for servicing of hydraulic system components; remove components from the hydraulic system; undertake servicing of hydraulic system components; and return hydraulic system to service.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hydraulic systems principles and operation
Version 1
33313 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people training in mechanical engineering trades. People credited with this unit standard are able to: describe energy in machine applications; demonstrate knowledge of the principles, terminology, and formulas of hydraulic systems; describe hydraulic components and symbology; demonstrate knowledge of hydraulic systems operation and applications; describe hydraulic power system contamination and mitigation; and describe hazards associated with hydraulic systems and their prevention or mitigation.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Design a hydraulic power system
This standard has expired and is no longer available.
Version 7
2729 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to design, and undertake design of a hydraulic power system.
Standard-setting body:
Service hydraulic power system components
Version 7
2731 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to service hydraulic power system components; remove components from the system; service system components; and return system to operation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose hydraulic power system faults
Version 7
2733 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to diagnose faults, carry out fault diagnoses, and follow up hydraulic power system fault diagnoses.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Design a closed circuit hydrostatic transmission power system
Version 2 This unit standard, unit standard 20608 and unit standard 20609 replaced unit standard 2735.
20607 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to establish system specifications for, and undertake design of a closed circuit hydrostatic transmission power system.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Design an open circuit, proportional hydraulic power system with closed loop control
Version 2 This unit standard, unit standard 20607 and unit standard 20609 replaced unit standard 2735.
20608 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to establish system specifications for, and undertake design of an open circuit, proportional hydraulic power system with closed loop control.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Design an open circuit, proportional hydraulic power system with open loop control
Version 2 This unit standard, unit standard 20607 and unit standard 20608 replaced unit standard 2735.
20609 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to establish system specifications for, and undertake design of an open circuit, proportional hydraulic power system with open loop control.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose faults in specialist hydraulic power equipment
Version 2 This unit standard replaced unit standard 2738.
20610 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to diagnose faults; carry out fault diagnoses; and evaluate fault diagnoses on specialist hydraulic power equipment.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 20 September 2024