Domain - Engineering - Materials
TOP > Engineering and Technology > Mechanical Engineering > Engineering - Materials
| 0 Qualifications | 20 Assessment Standards (20 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 1
Distinguish the characteristics of engineering materials
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 20917.
4795 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
Persons credited with this unit standard are able to distinguish metals from other basic materials used in engineering, and identify specified characteristics and properties of ferrous and non-ferrous metals.
Standard-setting body:
Level 2
Demonstrate basic knowledge of engineering materials
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 29549.
20917 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, in terms of engineering materials, demonstrate basic knowledge of the production of engineering materials; compare physical characteristics of engineering materials; and identify the selection factors and applications of engineering materials.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out heat treatment of metal parts under supervision
Version 7
2383 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, under supervision: prepare for the heat treatment of parts, and carry out the heat treatment of metal parts and complete records.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate basic knowledge of the mechanical properties and selection of engineering materials
Version 2 This unit standard replaced unit standard 20917
29549 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people employed in mechanical engineering requiring a basic knowledge of engineering materials and their application People credited with this unit standard are able to demonstrate basic knowledge of: the mechanical properties and strength of materials; manufacturing and production methods of engineering plastics; the use of rubber in mechanical engineering applications; the use of powdered material in manufacturing and mechanical engineering processes; the use and fabrication methods of composite materials; and the selection and use of common engineering materials.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate basic knowledge of common engineering metals
Version 2 This unit standard replaced unit standard 20799
29550 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for use in the training and assessment of mechanical engineering trades and is one of a series of three unit standards for this purpose with 29551 and 29552. People credited with this unit standard are able to demonstrate basic knowledge of the mechanical properties, strength and composition of common engineering metals, and their selection and use.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Distinguish the characteristics of engineering metals
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 20799.
4796 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
Persons credited with this unit standard are able to distinguish the characteristics of both ferrous and non-ferrous metals, and demonstrate knowledge of, and carry out, specified heat treatment and testing procedures.
Standard-setting body:
Level 3
Demonstrate knowledge of common engineering metals
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 29550.
20799 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the types, properties and characteristics of common engineering metals; describe the selection, use, and processing of common engineering metals; and demonstrate knowledge of the effect that external factors have on common engineering metals.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the strength, mechanical properties, and treatment of engineering metals
Version 1 This unit standard replaced unit standard 4797
29551 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for use in the training and assessment of mechanical engineering trades and is one of a series of three unit standards for this purpose with 29550 and 29552. People credited with this unit standard are able to demonstrate knowledge of: steelmaking; heat treatment processes; the effects of working metals; corrosive processes and corrosion control measures; and, of techniques for determining the composition, and the traceability and control of engineering metals.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the composition of common engineering metals
This standard has expired and is no longer available.
Version 9 This unit standard was replaced by unit standard 29551.
4797 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of ferrous and non-ferrous metals and their composition, and of techniques for determining the composition of engineering metals.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify and select engineering metals for specified applications
This standard has expired and is no longer available.
Version 5
4798 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
Persons credited with this unit standard are able to identify common applications for engineering metals and select a limited range of metals for specified applications.
Standard-setting body:
Level 4
Demonstrate knowledge of heat treatment of engineering metals
Version 1 This unit standard replaced unit standard 4800
29552 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for use in the training and assessment for mechanical engineering trades and is one of a series of three unit standards for this purpose with 29550 and 29551. People credited with this unit standard are able to demonstrate knowledge of: phase changes and crystalline structure of carbon steel; and heat treatment of metal.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test the physical properties of engineering metals
Version 7
4799 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to test the physical properties of engineering metals, test the physical properties of engineering metals, and interpret test results.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of heat treatment for engineering steels
This standard has expired and is no longer available.
Version 8 This unit standard has been replaced by unit standard 29552.
4800 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: the principles of heat treatment of engineering steels; heat treatment processes; and heat treatment applications.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of heat treatment for engineering non-ferrous metals
Version 7
4801 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: the principles of heat treatment of non-ferrous metals; heat treatment processes; and heat treatment applications.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Complete heat treatment of engineering metals in a furnace
Version 8
4802 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of heat treatment equipment and materials; prepare for heat treatment of engineering metals in a furnace; complete heat treatment of engineering metals in a furnace; and test metals and document results after heat treatment.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Demonstrate knowledge of engineering tool steels
This standard has expired and is no longer available.
Version 2 This unit standard has been replaced by unit standard 27446. This unit standard and unit standard 20801 replaced unit standard 4803.
20800 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are, for tool steel, able to demonstrate knowledge of types and uses, microstructure, heat treatment processes, and dimensional and shape stability.
Standard-setting body:
Demonstrate knowledge of, and undertake, surface treatment of steels
This standard has expired and is no longer available.
Version 2 This unit standard has been replaced by unit standard 27447. This unit standard and unit standard 20800 replaced unit standard 4803.
20801 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of surface treatment principles and processes; prepare for, and carry out, surface treatment of steels; and test steel and document results.
Standard-setting body:
Demonstrate knowledge of engineering tool steels and surface treatment of steels
Version 2 This unit standard replaced unit standard 20800.
27446 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are, for tool steel, able to demonstrate knowledge of types and uses; microstructure; heat treatment processes; dimensional and shape stability; and demonstrate knowledge of surface treatment principles and surface treatment processes for steels.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct surface treatment of steels
Version 2 This unit standard replaced unit standard 22801.
27447 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare for and carry out surface treatment of steels; and test steel and document results.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify heat treatment of tool steels and surface heat treatment processes for engineering metals
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 20800 and unit standard 20801.
4803 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
Persons credited with this unit standard are able to demonstrate knowledge of the effects carbon and alloying have on the heat treatment of tool steels, the surface heat treatment of metal, and identify steels and associated heat treatment processes for engineering metal components.
Standard-setting body:
Data as at 2024-04-25 23:01:13.2