Domain - Engineering Drawing and Design
TOP > Engineering and Technology > Mechanical Engineering > Engineering Drawing and Design
| 0 Qualifications | 20 Assessment Standards (20 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 1
Demonstrate knowledge of basic geometric form in engineering
Version 8
4434 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: two-dimensional (2D) and three-dimensional (3D) forms used in engineering; basic geometry instruments; and common engineering concepts that apply to geometric form.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 2
Manually produce and interpret engineering sketches under supervision
This standard has expired and is no longer available.
Version 9 This unit standard was replaced by unit standard 29655.
2430 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, under supervision, manually produce and interpret engineering sketches, and confirm the interpretation and preparation of engineering sketches.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manually produce and interpret simple engineering component drawings under supervision
Version 8
2431 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain engineering drawing office procedures; and, under supervision, interpret, manually produce, and confirm engineering component drawings.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manually construct plane geometric shapes for engineering
This standard has expired and is no longer available.
Version 9 This unit standard has been replaced by unit standard 29653.
2432 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to manually construct plane geometric shapes for engineering.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce engineering component drawings using CAD software
Version 8
2433 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare CAD environment; create drawing entities; edit entities and attributes; produce CAD engineering component drawing file output; and confirm output compliance.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of and interpret mechanical engineering drawings and geometric tolerancing
Version 1 This unit standard replaced unit standard 21910
29654 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This is an entry level unit standard for people working in the mechanical engineering trades involved in the interpretation of drawings. This unit standard is for use in the training and assessment for mechanical engineering trades. This unit standard is one of a series of three unit standards with unit standards 29653 and 29655. People credited with this unit standard are able to demonstrate knowledge of: engineering drawing office procedures and drawing concepts; select and interpret mechanical engineering drawings; and interpret geometric tolerancing in mechanical engineering drawings.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manually produce engineering sketches
Version 2 This unit standard replaced unit standard 2430.
29655 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This is an entry level unit standard for sketching engineering objects to a standard where all information required to produce the object is communicated. This unit standard is for use in the training and assessment for mechanical engineering trades. This unit standard is one of a series of three unit standards with 29653 and 29654. People credited with this unit standard are able to interpret and manually produce freehand and aided, two and three dimensional sketches to communicate all job requirements.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Produce detailed two-dimensional engineering drawings using CAD software under supervision
Version 4 This unit standard replaced unit standard 2435.
20802 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are, under supervision, able to: determine drawing requirements; determine tolerances and dimensions to produce drawings; produce and confirm two-dimensional (2D) engineering drawings using CAD software and follow drawing office procedures.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Interpret mechanical engineering drawings
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 29654.
21910 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to select and interpret mechanical engineering drawings.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manually produce detailed engineering drawings under supervision
Version 8
2434 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, under supervision: determine engineering drawing requirements; manually produce and confirm detailed engineering drawings; and follow drawing office procedures.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Apply productivity concepts to two dimensional computer aided design engineering drawing
This standard has expired and is no longer available.
Version 4
2435 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to produce detailed engineering two dimensional drawings by applying productivity concepts to computer aided drafting. This unit standard is designed for people working within the engineering field which may include mechanical, electrical, fluid power, fabrication, heating and ventilation, and refrigeration and air conditioning engineering industries.
Standard-setting body:
Create three-dimensional engineering models using CAD software under supervision
Version 8
2436 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, under supervision: prepare three-dimensional environment; create and modify three-dimensional engineering model; produce output from three-dimensional engineering model; and confirm output compliance.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manually produce third angle orthographic drawings of simple engineering objects incorporating plane geometric shapes
Version 1 This unit standard replaced unit standard 2432
29653 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for use in the training and assessment for mechanical engineering trades. This unit standard is one of a series of three unit standards with unit standards 29654 and 29655. People credited with this unit standard are able to, with the manual use of simple drawing instruments: construct plane geometric shapes, bisect angles and lines; and produce third angle orthographic drawings of simple engineering objects incorporating plane geometric shapes.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Manually produce advanced two-dimensional engineering drawings
Version 4 This unit standard and unit standard 20804 replaced unit standard 2437, unit standard 2438, and unit standard 2439.
20803 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: determine drawing requirements; perform tolerance calculations for drawings; produce and verify advanced two-dimensional (2D) engineering drawings; and follow drawing office procedures.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce advanced two-dimensional engineering drawings using CAD software
Version 4 This unit standard and unit standard 20803 replaced unit standard 2437, unit standard 2438, and unit standard 2439.
20804 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: determine drawing requirements; perform tolerance calculations for drawings; produce and verify advanced two-dimensional (2D) engineering drawings using CAD software; and follow drawing office procedures.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce mechanical and fluid power drawings
This standard has expired and is no longer available.
Version 5 This unit standard, unit standard 2438 and unit standard 2439 have been replaced by unit standard 20803 and unit standard 20804.
2437 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to produce mechanical and fluid power drawings including schematics, solid geometry, and surface development. This unit standard is designed for people within the mechanical and fluid power engineering fields.
Standard-setting body:
Produce fabrication drawings
This standard has expired and is no longer available.
Version 5 This unit standard, unit standard 2437 and unit standard 2439 have been replaced by unit standard 20803 and unit standard 20804.
2438 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to produce fabrication drawings including schematics, solid geometry, and surface developments. This unit standard is designed for people within the fabrication engineering industry.
Standard-setting body:
Produce heating, ventilation, refrigeration, and air conditioning drawings
This standard has expired and is no longer available.
Version 5 This unit standard, unit standard 2437 and unit standard 2438 have been replaced by unit standard 20803 and unit standard 20804.
2439 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to produce heating, ventilation, refrigeration, and air conditioning drawings including schematics, solid geometry, and surface developments. This unit standard is designed for people within the heating, ventilation and air conditioning, and refrigeration engineering industries.
Standard-setting body:
Level 5
Undertake non critical design of engineering components and assemblies
This standard has expired and is no longer available.
Version 5
2440 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to design mechanical components and assemblies with some supervision from technical experts. This unit standard is designed for people within the engineering industry which may include mechanical, electrical, fluid power, fabrication, heating and ventilation, refrigeration and air conditioning engineering industries.
Standard-setting body:
Create complex three-dimensional engineering models
Version 8
2441 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare three-dimensional environment; create and modify three-dimensional models in assembly modelling; produce output from three-dimensional models; and confirm output.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-04-19 23:01:07.723