Domain - Heating, Ventilating, and Air Conditioning

Domain - Heating, Ventilating, and Air Conditioning

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Engineering and Technology > Mechanical Engineering > Heating, Ventilating, and Air Conditioning

Qualifications Domain-full

NQF Ref: 0124
National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4)
This qualification is expiring. The last date for assessments to take place is 31 December 2022.
Word   PDF

Assessment Standards

Hide education organisations, CMR & purpose  »

Level 2

Install mechanical services plant to plans and specifications under supervision
This standard has expired and is no longer available.

Version 6

3240 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: procure materials for installing mechanical services plant; set out a job; and fit the plant.

Standard-setting body:

Competenz

Install external insulation (pipe work) to plans and specifications under supervision
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 3242 have been replaced by unit standard 26333.

3241 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: read work site documents for installing external insulation for pipe work; procure materials; and fit the insulation.

Standard-setting body:

Competenz

Install external insulation (duct work) to plans and specifications under supervision
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 3241 have been replaced by unit standard 26333.

3242 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: read work site documents for installing external insulation for duct work; procure materials; and fit the insulation.

Standard-setting body:

Competenz

Level 3

Demonstrate knowledge, and plan and install pipe-work and ducting for mechanical building services under supervision

Word  PDF

Version 3

26327 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers installation of pipe-work and ducting for mechanical building services. People credited with this unit standard are able to: demonstrate knowledge of pipe-work, ducting, and duct fittings used in mechanical building services; and evaluate, plan, and install duct and pipe-work at a worksite under supervision.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Integrate heating, ventilating, and air conditioning system components

Word  PDF

Version 2

26328 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the heating, ventilating, and air conditioning (HVAC) industry and covers integration of HVAC components. People credited with this unit standard are able to integrate components for a basic HVAC system; and complete documentation.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Pre-commission mechanical building services under supervision

Word  PDF

Version 2

26329 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers pre-commissioning of mechanical building services. People credited with this unit standard are able to, under supervision: prepare for pre-commissioning of mechanical building services, and pre-commission water side and air side of mechanical building services.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Read and interpret HVAC system drawings

Word  PDF

Version 2

26331 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the heating, ventilating, and air conditioning (HVAC) industry and covers interpretation of HVAC systems drawings to determine components, shapes, sizes, interfaces or connections, flow, pressure, installation requirements, and any special requirements. People credited with this unit standard are able to read and interpret HVAC system drawings.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Install external insulation to pipe-work and ducting for mechanical building services

Word  PDF

Version 3 This unit standard replaced unit standard 3241 and unit standard 3242.

26333 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers installation of external insulation to pipe-work and ducting for mechanical building services. People credited with this unit standard are able to prepare to install, and install external insulation to pipe-work and ducting for mechanical building services.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate introductory knowledge of mechanical building services

Word  PDF

Version 3

26335 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers introductory knowledge of mechanical building services. People credited with this unit standard are able to demonstrate knowledge of: the physical principles underpinning the operation of mechanical building services equipment; the role of air conditioning in relation to human comfort; electricity relevant to the mechanical building services trade and the scope of different electrical practising licenses; the refrigeration cycle as used in mechanical building services; heat transfer in mechanical building services systems with reference to major components; the scope and structure of the mechanical building services industry in New Zealand; the Building Act requirements in relation to mechanical building services installation; and mounting mechanical building services components.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of the components used in heating, ventilating, and air conditioning systems

Word  PDF

Version 2

26336 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the heating, ventilating, and air conditioning (HVAC) industry and covers principles of HVAC components and their application. People credited with this unit standard are able to demonstrate knowledge of the components used in HVAC systems and seismic restraints on HVAC system components in accordance with NZS 4219.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of seismic restraint of HVAC systems and components

Word  PDF

Version 1

30582 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the heating, ventilating, and air conditioning (HVAC) industry and covers the principles of seismic restraint. People credited with this unit standard are able to demonstrate knowledge of: the purpose for seismic restraints of non-structural components of a building; the terminology associated with seismic restraint of non-structural components in buildings; and installation requirements and practices for seismic restraint of pipe-works, ducting, and components of HVAC systems.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of organisations and compliance systems relevant to mechanical building services industry

Word  PDF

Version 1

31141 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and includes knowledge of organisations, legislation, standards, guides, codes of practice, and documentation applicable to the mechanical building services sector. People credited with this unit standard are able to demonstrate knowledge of: the organisations that impact on the mechanical building services industry; legislations and regulations that impact on the mechanical building services industry; standards, guides, and codes of practice that impact on the mechanical building services industry; and other documentation that impact on the mechanical building services industry.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of refrigerants and their use in mechanical building services

Word  PDF

Version 2

31142 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry. It covers basic knowledge of refrigerants and the legislative requirements for their use in mechanical building services. People credited with this unit standard are able to demonstrate knowledge of: legislation, codes of practice, and the management of hazards associated with refrigerants; commonly used refrigerants; the effect of refrigerants on the atmosphere. Learners are also able to recognise and interpret refrigerant labelling and take precautions when handling refrigerants.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Install steel pipe work according to plans and specifications under supervision
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3235, and unit standard 3237 have been replaced by unit standard 26334.

3234 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: procure materials for steel pipe work installation and set out a job; install hangers, pipes and fittings and join steel pipe; and test the pipe work.

Standard-setting body:

Competenz

Install copper pipe work according to plans and specifications under supervision
This standard has expired and is no longer available.

Version 7 This unit standard, unit standard 3234, and unit standard 3237 have been replaced by unit standard 26334.

3235 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: procure materials for copper pipe work installation and set out a job; install hangers, pipes and fittings and join copper pipe; and test the pipe work.

Standard-setting body:

Competenz

Install plastics pipe work according to plans and specifications under supervision
This standard has expired and is no longer available.

Version 7 This unit standard, unit standard 3234, and unit standard 3235 have been replaced by unit standard 26334.

3237 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: procure materials for plastic pipe work installation and set out the job; install hangers, pipes and fittings and join plastic pipe; and test the pipe work.

Standard-setting body:

Competenz

Manufacture duct work to plans and specifications
This standard has expired and is no longer available.

Version 6

3238 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare to manufacture duct work; develop and cut sheets and insulation; and assemble the duct work.

Standard-setting body:

Competenz

Install cladding to plans and specifications under supervision
This standard has expired and is no longer available.

Version 6

3243 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able, under supervision, to: read work site documents for installing cladding; procure materials; and manufacture and fit the cladding.

Standard-setting body:

Competenz

Install specialised components for heating, ventilating, and air conditioning systems

Word  PDF

Version 7

3244 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the heating, ventilating, and air conditioning (HVAC) industry and covers installation of specialised components for HVAC systems. People credited with this unit standard are able to: prepare to install, and install specialised components; and complete installation documentation.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Manually produce dimensioned sketches of site measures to communicate fabrication requirements

Word  PDF

Version 1

32863 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: manually produce freehand detailed dimensioned sketches of site measures to communicate all fabrication job requirements, manually produce aided dimensioned sketches of site measures to communicate all fabrication job requirements, and verify produced sketches to be accurate for the purpose of manufacturing site measure components.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Competenz

Level 4

Integrate mechanical building services equipment and components

Word  PDF

Version 3 This unit standard replaced unit standard 3199, unit standard 3200, unit standard 3201, unit standard 3202, unit standard 3203, unit standard 3204, and unit standard 3205.

26332 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers integration of mechanical building services equipment and components. People credited with this unit standard are able to: prepare for integration of mechanical building services equipment and components; and integrate mechanical building services equipment and components.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Install pipe-work for mechanical building services

Word  PDF

Version 3 This unit standard replaced unit standard 3234, unit standard 3235, and unit standard 3237.

26334 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers installation of pipe-work for mechanical building services. People credited with this unit standard are able to: prepare to install pipe-work; install pipe-work for mechanical building services; and test pipe-work.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate advanced knowledge of mechanical building services

Word  PDF

Version 3

26337 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers the advanced knowledge of mechanical building services. People credited with this unit standard are able to demonstrate advanced knowledge of the operation of mechanical building services, and mechanical building services control and building management systems.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Maintain mechanical building services

Word  PDF

Version 2 This unit standard replaced unit standard 3217, unit standard 3218, unit standard 3219, unit standard 3220, unit standard 3221, unit standard 3222, and unit standard 3223.

26338 Unit Standard 25 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers maintenance of mechanical building services. People credited with this unit standard are able to: prepare maintenance schedules and reports for mechanical building services; maintain mechanical building services components, controls and operation; and complete and monitor mechanical building services maintenance documentation.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Pre-commission mechanical building services

Word  PDF

Version 2 This unit standard replaced unit standard 3246, unit standard 3247, unit standard 3248, unit standard 3249, unit standard 3250, unit standard 3251, unit standard 3252, and unit standard 3253.

26339 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers pre-commissioning of mechanical building services to the industry standard. People credited with this unit standard are able to: prepare for pre-commissioning of mechanical building services; pre-commission water side of mechanical building services; pre-commission air side of mechanical building services.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Integrate hot water heating systems components
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3200, unit standard 3201, unit standard 3202, unit standard 3203, unit standard 3204, and unit standard 3205 have been replaced by unit standard 26332.

3199 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for a hot water heating system; integrate the heating equipment and distribution components; and test and fill the system.

Standard-setting body:

Competenz

Integrate chilled water systems components
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3199, unit standard 3201, unit standard 3202, unit standard 3203, unit standard 3204, and unit standard 3205 have been replaced by unit standard 26332.

3200 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for a chilled water system; integrate the water chilling and heat rejection equipment and distribution components; and test and fill the system.

Standard-setting body:

Competenz

Integrate potable hot and cold water systems components
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3199, unit standard 3200, unit standard 3202, unit standard 3203, unit standard 3204, and unit standard 3205 have been replaced by unit standard 26332.

3201 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for a potable hot and cold water system; integrate potable hot and cold water equipment and distribution components; and test and fill the system.

Standard-setting body:

Competenz

Integrate steam and condensate systems components
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3199, unit standard 3200, unit standard 3201, unit standard 3203, unit standard 3204, and unit standard 3205 have been replaced by unit standard 26332.

3202 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for a steam and condensate system; integrate the steam and condensate equipment, fuel supply equipment and distribution components; and test and fill the system. It is recommended that people undertaking assessment for this unit standard have already demonstrated competence in metal fabrication - light. They should also have demonstrated competence in welding to the standards specified in B.S. 2640 and B.S. 2971 or industry accepted equivalent.

Standard-setting body:

Competenz

Integrate ventilation and air conditioning systems components
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3199, unit standard 3200, unit standard 3201, unit standard 3202, unit standard 3204, and unit standard 3205 have been replaced by unit standard 26332.

3203 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for ventilation and air conditioning systems; integrate the ventilation and air conditioning equipment and distribution components; and test the pipe work and duct work.

Standard-setting body:

Competenz

Integrate systems components for gas systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3199, unit standard 3200, unit standard 3201, unit standard 3202, unit standard 3203, and unit standard 3205 have been replaced by unit standard 26332.

3204 Unit Standard 9 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for gas systems; integrate the gas system equipment and distribution components; and test and fill the system.

Standard-setting body:

Competenz

Integrate industrial liquids systems components
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3199, unit standard 3200, unit standard 3201, unit standard 3202, unit standard 3203, and unit standard 3204 have been replaced by unit standard 26332.

3205 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for industrial liquids systems; integrate the industrial liquids equipment and distribution components; and test and fill the system.

Standard-setting body:

Competenz

Maintain air conditioning and ventilation systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3218, unit standard 3219, unit standard 3220, unit standard 3221, unit standard 3222, and unit standard 3223 have been replaced by unit standard 26338.

3217 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare maintenance schedules and reports for an air conditioning and ventilation system; inspect and carry out maintenance on an air conditioning or ventilation system's equipment and plant; inspect and clean the duct work and check that the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Maintain hot water heating systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3217, unit standard 3219, unit standard 3220, unit standard 3221, unit standard 3222, and unit standard 3223 have been replaced by unit standard 26338.

3218 Unit Standard 18 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare maintenance schedules for hot water heating systems; inspect and carry out maintenance on the heating equipment and plant; check the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Maintain steam and condensate systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3217, unit standard 3218, unit standard 3220, unit standard 3221, unit standard 3222, and unit standard 3223 have been replaced by unit standard 26338.

3219 Unit Standard 18 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare maintenance schedules for steam and condensate systems; inspect and carry out maintenance on the steam and condensate equipment and plant; check the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Maintain systems for gases
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3217, unit standard 3218, unit standard 3219, unit standard 3221, unit standard 3222, and unit standard 3223 have been replaced by unit standard 26338.

3220 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare maintenance schedules for a gas system; inspect and carry out maintenance on the gas equipment and plant; check the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Maintain potable hot and cold water systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3217, unit standard 3218, unit standard 3219, unit standard 3220, unit standard 3222, and unit standard 3223 have been replaced by unit standard 26338.

3221 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare maintenance schedules for a potable hot and cold water system; inspect and carry out maintenance on the potable hot and cold water equipment and plant; check the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Maintain chilled water systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3217, unit standard 3218, unit standard 3219, unit standard 3220, unit standard 3221, and unit standard 3223 have been replaced by unit standard 26338.

3222 Unit Standard 18 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare a maintenance schedule for a chilled water system; inspect and carry out maintenance on the chilled water equipment and plant; check the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Maintain industrial liquids systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3217, unit standard 3218, unit standard 3219, unit standard 3220, unit standard 3221, and unit standard 3222 have been replaced by unit standard 26338.

3223 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: prepare a maintenance schedule for an industrial liquids system; inspect and carry out maintenance on the industrial liquids equipment and plant; check the controls function; monitor maintenance of the system; and complete maintenance documentation.

Standard-setting body:

Competenz

Install stainless steel pipe-work for mechanical building services

Word  PDF

Version 7

3236 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers installation of stainless steel pipe-work for mechanical building services. People credited with this unit standard are able to: prepare to install stainless steel pipe-work; install stainless steel pipe-work for mechanical building services; and test stainless steel pipe-work.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Install duct-work for mechanical building services

Word  PDF

Version 7

3239 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers installing duct-work for mechanical building services. People credited with this unit standard are able to: prepare to install duct-work; install duct-work; and install terminal fittings and components.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Pre-commission and inspect air conditioning and ventilation systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3247, unit standard 3248, unit standard 3249, unit standard 3250, unit standard 3251, unit standard 3252, and unit standard 3253 have been replaced by unit standard 26339.

3246 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of air conditioning and ventilation system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect hot water heating systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3248, unit standard 3249, unit standard 3250, unit standard 3251, unit standard 3252, and unit standard 3253 have been replaced by unit standard 26339.

3247 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of hot water heating system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect steam and condensate systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3247, unit standard 3249, unit standard 3250, unit standard 3251, unit standard 3252, and unit standard 3253 have been replaced by unit standard 26339.

3248 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of steam and condensate system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect systems for gases
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3247, unit standard 3248, unit standard 3250, unit standard 3251, unit standard 3252, and unit standard 3253 have been replaced by unit standard 26339.

3249 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of gas system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect potable hot and cold water systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3247, unit standard 3248, unit standard 3249, unit standard 3251, unit standard 3252, and unit standard 3253 have been replaced by unit standard 26339.

3250 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of potable hot and cold water system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect materials handling duct work systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3247, unit standard 3248, unit standard 3249, unit standard 3250, unit standard 3252, and unit standard 3253 have been replaced by unit standard 26339.

3251 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of duct work system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect chilled water systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3247, unit standard 3248, unit standard 3249, unit standard 3250, unit standard 3251, and unit standard 3253 have been replaced by unit standard 26339.

3252 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check installation, connections and cleanliness of chilled water system; check system operation and completion; and record and report on the system.

Standard-setting body:

Competenz

Pre-commission and inspect industrial liquids systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3246, unit standard 3247, unit standard 3248, unit standard 3249, unit standard 3250, unit standard 3251, and unit standard 3252 have been replaced by unit standard 26339.

3253 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: check the compliance of an industrial liquids system with work site documents and ensure all services are connected; flush, purge and fill the system and check the operation of the plant and controls; check that the pipe work systems have been completed; set the system to operation; and record and report on pre-commissioning.

Standard-setting body:

Competenz

Level 5

Commission mechanical building services

Word  PDF

Version 2 This unit standard replaced unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3230, unit standard 3231, and unit standard 3232.

26330 Unit Standard 25 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers commissioning mechanical building services. People credited with this unit standard are able to: prepare for commissioning mechanical building services; commission mechanical building services; complete mechanical building services commissioning documentation; and diagnose and rectify mechanical building services faults at commissioning.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Service mechanical building services

Word  PDF

Version 2

26340 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended primarily for use in the training of personnel in the mechanical building services industry and covers servicing of mechanical building services. People credited with this unit standard are able to: prepare for servicing of mechanical building services; check and adjust mechanical building services operation; diagnose and rectify faults in mechanical building services; retrofit existing mechanical building services with alternative components; recondition components for mechanical building services; and complete servicing records.

Consent & Moderation Requirements:

CMR 13 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Commission air conditioning systems and diagnose faults in these systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3230, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3224 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning an air conditioning system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on an air conditioning system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and prepare reports.

Standard-setting body:

Competenz

Commission hot water heating systems and diagnose hot water heating systems faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3230, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3225 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning a hot water heating system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on a heating system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission steam and condensate systems and diagnose steam and condensate systems faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3230, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3226 Unit Standard 18 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning a steam and condensate system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on a steam and condensate system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission systems for gases and diagnose gas systems faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3228, unit standard 3229, unit standard 3230, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3227 Unit Standard 18 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning a gas system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on a system for gases and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission potable hot and cold water systems and diagnose faults in these systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3229, unit standard 3230, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3228 Unit Standard 14 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning a potable hot and cold water system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on a potable hot and cold water system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission ventilation systems and diagnose ventilation systems faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3230, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3229 Unit Standard 11 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning a ventilation system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on a ventilation system and inspect and observe its operation; to diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission industrial liquids systems and diagnose industrial liquids systems faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3231, and unit standard 3232 have been replaced by unit standard 26330.

3230 Unit Standard 14 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning an industrial liquids system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on an industrial liquid system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission chilled water systems and diagnose chilled water systems faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3230, and unit standard 3232 have been replaced by unit standard 26330.

3231 Unit Standard 14 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: document the procedure required for commissioning a chilled water system; measure and record the operational effectiveness and efficiency of the system; adjust the system for optimal operations and confirm its compliance after adjustment; collect information and reports on a chilled water system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Commission control or building management systems and diagnose their faults
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3224, unit standard 3225, unit standard 3226, unit standard 3227, unit standard 3228, unit standard 3229, unit standard 3230, and unit standard 3231 have been replaced by unit standard 26330.

3232 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: assemble design data for commissioning control or building management systems and check the system's compliance with work site documents; check the function of the system's components; calibrate, and monitor the system; record and report on the system; collect information and reports on a control or building management system and inspect and observe its operation; diagnose, locate and repair system faults; and complete inspection and repair reports.

Standard-setting body:

Competenz

Produce mechanical services schedule of quantities from plans and specifications and prepare tender
This standard has expired and is no longer available.

Version 6

3233 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: interpret a heating, ventilation or air conditioning contract and its conditions and terms; take measurements off plans or documents to produce a quantities schedule and prepare a pricing schedule; calculate rates, obtain quotes (including sub tenderers); price a contract; and prepare a tender for submission.

Standard-setting body:

Competenz

Electrically maintain mechanical services plant
This standard has expired and is no longer available.

Version 6

3245 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: obtain information and procure equipment for electrically maintaining mechanical services plant; test the plant and ensure compliance with work site documents; maintain mechanical services plant electrical components; and record and report on maintenance carried out.

Standard-setting body:

Competenz

Level 6

Design and specify hot water heating systems
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 3207 have been replaced by unit standard 24530.

3206 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a hot water heating system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify chilled water systems
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 3206 have been replaced by unit standard 24530.

3207 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a chilled water system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify potable hot and cold water systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3209, unit standard 3212, and unit standard 3213 have been replaced by unit standard 24531.

3208 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a potable hot and cold water system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify steam and condensate systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3208, unit standard 3212, and unit standard 3213 have been replaced by unit standard 24531.

3209 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a steam and condensate system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify ventilation systems
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 3211 have been replaced by unit standard 24532.

3210 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a ventilation system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify air conditioning systems
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 3210 have been replaced by unit standard 24532.

3211 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for an air conditioning system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify systems for gases
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3208, unit standard 3209, and unit standard 3213 have been replaced by unit standard 24531.

3212 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a gas system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify industrial liquids systems
This standard has expired and is no longer available.

Version 6 This unit standard, unit standard 3208, unit standard 3209, and unit standard 3212 have been replaced by unit standard 24531.

3213 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for an industrial liquids system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify duct work for manufacture
This standard has expired and is no longer available.

Version 6

3214 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for duct work for manufacture; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Design and specify control and building management systems
This standard has expired and is no longer available.

Version 6 This unit standard has been replaced by unit standard 24533.

3215 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: confirm the design requirements for a control and building management system; prepare the conceptual design and budget; perform a complete detail design; and document the completed design.

Standard-setting body:

Competenz

Prepare mechanical services operating and maintenance manuals
This standard has expired and is no longer available.

Version 6

3216 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: gather information; document operating and maintenance details for a heating, ventilation and air conditioning system or mechanical service; and compile and edit a draft manual.

Standard-setting body:

Competenz

Data as at 27 November 2021