Domain - Automotive Reglazing
TOP > Manufacturing > Glass and Glazing > Automotive Reglazing
| 0 Qualifications | 15 Assessment Standards (15 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Remove and install framed automotive glass
This standard has expired and is no longer available.
Version 4
22349 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are involved in automotive reglazing. People credited with this unit standard are able to: prepare to remove and install framed automotive glass; remove fitted framed automotive glass from vehicle; install framed automotive glass; and clean work areas and maintain framed automotive glass installation equipment.
Standard-setting body:
Install a side window panel in a van
This standard has expired and is no longer available.
Version 4
22351 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are involved in automotive reglazing. People credited with this unit standard are able to: prepare to install a side window panel in a van; mark out, and cut van panel and trim, and prepare cut edges using template; install side window glass in a van; and clean work areas and maintain window installation equipment.
Standard-setting body:
Remove, refit, and test electrical and electronic components for automotive reglazing
Version 5
22353 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can: remove automotive electrical and electronic components to prepare for reglazing; refit and test components following automotive reglazing; and clean, store, and maintain equipment used to remove, refit, and test vehicle components.
Consent & Moderation Requirements:
CMR 73
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of quality standards and land transport rules for automotive reglazing
Version 4
26078 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
A person credited with this unit standard can demonstrate knowledge of quality standards and land transport rules for automotive reglazing.
Consent & Moderation Requirements:
CMR 73
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the surface preparation and use of adhesives and sealants for automotive reglazing
Version 4
26080 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can demonstrate knowledge of: tools and equipment used with adhesives and sealants in automotive reglazing; surface preparation for adhesives and sealants; and . adhesives and sealants for automotive re-glazing.
Consent & Moderation Requirements:
CMR 73
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and install rubber fitted automotive glass
This standard has expired and is no longer available.
Version 3
26081 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are involved in automotive reglazing. People credited with this unit standard are able to: prepare to remove and install rubber fitted automotive glass; remove rubber fitted automotive glass from vehicle; install rubber fitted automotive glass; and clean work areas and maintain rubber fitted automotive glass installation equipment.
Standard-setting body:
Demonstrate knowledge of automotive fixtures and fittings related to automotive reglazing
This standard is expiring. The last date for assessment to take place is Tue Dec 31 00:00:00 NZDT 2024.
Version 3
28767 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This theory-based entry-level unit standard is for people working in the automotive reglazing industry. People credited with this unit standard are able to: demonstrate knowledge of motor vehicle identification plates and specifications; and demonstrate safety precautions on vehicles fitted with air bags and/or seatbelt pre-tensioners when fitting or replacing automotive glass.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of motor vehicle identification plates and specifications
Version 1
33017 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can demonstrate knowledge of motor vehicle identification plates and specifications.
Consent & Moderation Requirements:
CMR 48
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe safety precautions for airbags and seatbelt pre-tensioners when fitting automotive glass
Version 1
33018 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can describe safety precautions for air bags and seatbelt pretensioners when fitting automotive glass.
Consent & Moderation Requirements:
CMR 48
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Repair laminated automotive glass
Version 5
22348 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can, for laminated automotive glass: prepare to repair; repair and clean, and provide warranty information; and complete cleaning, storage, and maintenance requirements.
Consent & Moderation Requirements:
CMR 73
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove, manufacture, and replace glass in automotive mirrors
Version 5
22350 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can, for an automotive mirror: prepare to remove and replace glass; manufacture and replace glass; and complete cleaning, storage, and maintenance requirements.
Consent & Moderation Requirements:
CMR 73
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out pre-work inspection for automotive reglazing
This standard is expiring. The last date for assessment to take place is Tue Dec 31 00:00:00 NZDT 2024.
Version 3
28766 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for experienced people working in the automotive reglazing industry. People credited with this unit standard are able to: confirm details for automotive reglazing work; and check vehicle interior for water leaks to enable fitting or replacing of automotive glass.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and replace automotive glass
Version 3 This unit standard replaced unit standard 22349 and unit standard 26081.
28768 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can: prepare to remove and replace automotive glass; remove and replace automotive glass from vehicle; and complete cleaning, storage, and maintenance requirements for removing and replacing automotive glass.
Consent & Moderation Requirements:
CMR 73
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify and repair an automotive glass interior water leak
Version 1
33014 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can: identify and repair an automotive glass interior water leak, and complete cleaning and storage requirements.
Consent & Moderation Requirements:
CMR 48
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect a vehicle glazing and book an automotive reglazing job
Version 1
33015 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
A person credited with this standard can inspect a vehicle and book an automotive re-glazing job.
Consent & Moderation Requirements:
CMR 48
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-05-03 23:01:18.46