Domain - Electronic Installation and Maintenance
TOP > Engineering and Technology > Electronic Engineering > Electronic Installation and Maintenance
| 0 Qualifications | 15 Assessment Standards (15 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Demonstrate systematic and logical fault finding techniques in electronic products or systems
This standard has expired and is no longer available.
Version 7 This unit standard has been replaced by unit standard 26727.
8191 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard covers basic fault finding in electronic products or systems in a systematic and logical manner. People credited with this unit standard are able to: . identify relevant symptoms of fault; and . apply logical and systematic techniques to identify location and cause of fault.
Standard-setting body:
Carry out soldering and de-soldering of printed circuit board mounted components and printed circuit board repair
Version 5
8218 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . maintain soldering and de-soldering equipment; . de-solder and solder using soldering irons and soldering stations; . de-solder and solder using airflow equipment; and . bridge and repair broken PCB.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Level 4
Demonstrate and apply knowledge of advanced diagnostics for electronics technicians
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 20718 have been replaced by unit standard 26725.
20721 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers advanced diagnostics for electronics technicians. Included is the knowledge of: . electronic component and product reliability; . diagnostic processes; . and the use of practical diagnostic techniques.
Standard-setting body:
Install and commission electronic equipment
This standard has expired and is no longer available.
Version 3
20722 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the installation and commissioning of electronic equipment for electronics technicians. People credited with this unit standard are able to: . plan and prepare for the installation of electronic equipment; . install electronic equipment; . test and commission electronic equipment; and . handover electronic equipment to customer.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Diagnose and repair faulty industrial electronic equipment to component level
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 20724, and unit standard 20725 have been replaced by unit standard 26726.
20723 Unit Standard 40 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the diagnosis and repair of electronic equipment used in the operation and control of industrial processes to component level for electronics technicians. Excluded are computing equipment, consumer electronic equipment, electronic office equipment, marine electronic systems, radar, and radio, which are covered by the unit standards listed in explanatory note 6. Included are: . preparatory steps; . fault diagnosis; . equipment repair and test; and . post-repair procedures.
Standard-setting body:
Diagnose and repair faulty consumer electronic equipment to component level
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 20723, and unit standard 20725 have been replaced by unit standard 26726.
20724 Unit Standard 40 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the diagnosis and repair of consumer electronic equipment to component level for electronics technicians. Consumer electronic equipment may include audio equipment, video tape recorder (VTR), compact disc (CD), and digital versatile disc (DVD) equipment, television receivers, and personal computer equipment. Included are: . preparatory steps; . fault diagnosis; . equipment repair and test; and . post-repair procedures.
Standard-setting body:
Diagnose and repair faulty electronic telecommunications equipment to component level
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 20723, and unit standard 20724 have been replaced by unit standard 26726.
20725 Unit Standard 40 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the diagnosis and repair of electronic telecommunications equipment to component level for electronics technicians. Included are: . preparatory steps; . fault diagnosis; . equipment repair and test; and . post-repair procedures.
Standard-setting body:
Diagnose and repair faulty electronic systems to module level
This standard has expired and is no longer available.
Version 3
20726 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the diagnosis and repair of electronic systems in general to module level for electronics technicians. Excluded are computing equipment, consumer electronic equipment, electronic office equipment, marine electronic systems, radar, and radio, which are covered by the unit standards listed in Guidance Information note 6. People credited with this unit standard are able to: . prepare to diagnose and repair electronic systems; . diagnose faults; . repair and test equipment; and . complete post-repair procedures.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Performance test and repair faulty electronic communications equipment
Version 2 This unit standard replaced unit standard 6062 and unit standard 6063.
26724 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for electronics technicians who are responsible for performance testing and the diagnosis and repair of faults in electronic communications equipment to unit or component level. People credited with this unit standard are able to: . performance test electronic communications equipment; . diagnose faulty electronic communications equipment; and . repair, test, and restore electronic communications equipment to service.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Diagnose and repair faulty electronic equipment to component level
This standard has expired and is no longer available.
Version 2
26726 Unit Standard 40 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for electronics technicians who are responsible for the diagnosis and repair of consumer electronic equipment, industrial electronic equipment, or electronic telecommunications equipment, all to component level. People credited with this unit standard are able to: . prepare to diagnose and repair electronic equipment; . diagnose faults; . repair and test electronic equipment; and . complete post-repair procedures.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Performance test and repair faulty radar equipment to unit or component level
Version 5
6061 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for electronics technicians who are responsible for performance testing and the diagnosis and repair of faults in radar equipment to unit or component level. People credited with this unit standard are able to: . performance test radar equipment; . diagnose faulty radar equipment; and . repair, test, and restore radar equipment to service.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Performance test and repair faulty radio transmitter equipment
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 6063 have been replaced by unit standard 26724.
6062 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard covers performance testing and the diagnosis and repair of faults in radio transmitter equipment to unit or component level for electronics technicians. Included are: . performance testing; . fault diagnosis; and . repair, test, and restoration of equipment to service.
Standard-setting body:
Performance test and repair faulty communications radio receiver equipment
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 6062 have been replaced by unit standard 26724.
6063 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard covers performance testing and the diagnosis and repair of faults in radio receiver equipment to unit or component level for electronics technicians. Included are: . performance testing; . fault diagnosis; and . repair, test, and restoration of equipment to service.
Standard-setting body:
Diagnose and repair faulty electronic office equipment to module level
This standard has expired and is no longer available.
Version 5
6066 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for electronics technicians and covers the diagnosis and repair of electronic office equipment to module level. Excluded are personal computers and peripherals, which are covered by the unit standards listed in Guidance Information Note 4. People credited with this unit standard are able to: prepare to diagnose and repair electronic office equipment; diagnose faults in electronic office equipment; repair and test electronic office equipment; and complete post-repair procedures.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Diagnose and repair a faulty microprocessor or microcontroller system
Version 5
8213 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard covers diagnosis and repair of faults in microprocessor or microcontroller systems to component level for electronics technicians. People credited with this unit standard are able to: - diagnose a faulty microprocessor or microcontroller system; and - repair, test, and restore microprocessor or microcontroller equipment to service.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Data as at 2025-05-01 23:01:07.45