Domain - Extrusion
TOP > Manufacturing > Plastics Processing Technology > Extrusion
| 0 Qualifications | 12 Assessment Standards (12 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 1
Perform basic extrusion process operations
This standard has expired and is no longer available.
Version 6
281 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify and take precautions against operation hazards; perform extrusion process operations; identify plastics, scrap and waste materials, and demonstrate material granulating and scrap and waste material separation; in accordance with enterprise procedures. This unit standard is to enable entry level people to perform basic process operations in an extrusion operation.
Standard-setting body:
Level 2
Operate the extrusion machine
This standard has expired and is no longer available.
Version 6
282 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the construction of an extrusion line; operate an extrusion process line; describe consequences of not applying quality procedures during extrusion, and actions to be taken when products do not meet specifications; purge, shut down, perform a material or colour changeover, and restart an extrusion line; in accordance with enterprise procedures.
Standard-setting body:
Run and control the extrusion production process
This standard has expired and is no longer available.
Version 6
283 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the operation of an extrusion line; apply and control extrusion line settings; and identify and correct product extrusion faults.
Standard-setting body:
Change dies and set ancillary equipment for extrusion
This standard has expired and is no longer available.
Version 6
285 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: remove, fit, set, and change die and calibration or sizing equipment; and describe, select, set up, and test ancillary and downstream equipment.
Standard-setting body:
Level 3
Control and optimise the extrusion production process
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 27571 and unit standard 27631.
284 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to control the extrusion process for a repeat production run, and trial an extrusion product or process on a specified extrusion line.
Standard-setting body:
Demonstrate knowledge of advanced extrusion tooling and change extruder screws
This standard has expired and is no longer available.
Version 6
286 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the construction of advanced extrusion tooling; and describe the reasons for removal and refitting of extruder screws, and remove and refit an extruder screw or screws.
Standard-setting body:
Demonstrate knowledge of, and operate and control the plastics extrusion process
Version 1
29520 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the operation; and the construction of a plastics extrusion line; apply and control plastics extrusion line settings; operate a plastics extrusion process line; demonstrate knowledge of, select, set up, and test ancillary equipment; identify and describe the correction of routine product extrusion faults; describe consequences of not applying quality procedures during extrusion, and actions to be taken when products do not meet specifications; perform a material or colour changeover, and restart a pre-set plastics extrusion line; and demonstrate knowledge of the construction of advanced plastics extrusion tooling.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out routine service of extrusion equipment
Version 1
29521 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: remove, fit, set and change plastics extrusion dies and equipment; and remove and refit an extruder screw.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare and set up polymer extrusion process for a new product trial
Version 1
29522 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to trial a polymer extrusion process; and set up equipment for extrusion process trial.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Trial an extrusion product or process on a specified extrusion line
Version 2 This unit standard and unit standard 27631 replaced unit standard 284.
27571 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to trial an extrusion product or process on a specified extrusion line.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Optimise the extrusion process and operate an extrusion process for complex products
Version 2 This unit standard and unit standard 27571 replaced unit standard 284.
27631 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: optimise the extrusion process for a repeat production run, and operate an extrusion process for complex products.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare extrusion dies and calibrators for production and demonstrate knowledge of their design principles
Version 5
9715 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare a die and a calibrator; and demonstrate knowledge of extrusion tooling design principles.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2025-05-01 23:01:07.45