Domain - Gas Measurement

Domain - Gas Measurement

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Engineering and Technology > Gas Industry > Gas Measurement

Qualifications Domain-full

No qualifications currently registered at this level. Also check fields and sub-fields.

Assessment Standards

Hide education organisations, CMR & purpose  »

Level 2

Demonstrate knowledge of gas meters and correctors
This standard has expired and is no longer available.

Version 5 This unit standard, unit standard 23084, and unit standard 23088 were replaced by unit standard 30381.

12450 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe the types, operation, application, and handling of meters and correctors used in a gas distribution network.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Read and interpret domestic gas meter data
This standard has expired and is no longer available.

Version 4 This unit standard and unit standard 12454 have been replaced by unit standard 23084.

12453 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify equipment and procedures for domestic gas meter reading, and use equipment and procedures for domestic meter reading.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)

Read and interpret commercial gas metering equipment
This standard has expired and is no longer available.

Version 4 This unit standard and unit standard 12453 have been replaced by unit standard 23084.

12454 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify equipment and procedures for commercial gas metering equipment reading, and use equipment and procedures for commercial gas meter reading.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)

Demonstrate knowledge of storing, handling, and transporting domestic gas meters
This standard has expired and is no longer available.

Version 2 This unit standard has been replaced by unit standard 23085.

20441 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with the unit standard are able to describe the methods used for storing, handling, and transporting domestic gas meters.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)

Describe the storage, handling, transporting, and fitting of gas meters up to 25 cubic metres capacity
This standard has expired and is no longer available.

Version 2 This unit standard replaced unit standard 20441. This unit standard and unit standard 12510 were replaced by unit standard 30382.

23085 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe the storage, handling, transporting, and fitting of gas meters up to 25 cubic metres capacity.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Level 3

Test gas meters using a bell prover
This standard has expired and is no longer available.

Version 4

19544 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: locate and identify procedures, documentation, and equipment for testing a gas meter using a bell prover; prepare to and test gas meters using a bell prover; and complete reporting and documentation for testing gas meters.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Read and interpret gas metering equipment
This standard has expired and is no longer available.

Version 2 This unit standard replaced unit standard 12453 and unit standard 12454. This unit standard, unit standard 12450, and unit standard 23088 were replaced by unit standard 30381.

23084 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify equipment and procedures for reading and interpreting gas metering equipment; and use equipment and procedures for gas meter reading.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Read and interpret gas metering equipment
This standard has expired and is no longer available.

Version 2 This unit standard was replaced by unit standard 32040, unit standard 32041, and unit standard 32042. This unit standard replaced unit standard 12450, unit standard 23084, and unit standard 23088.

30381 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the types, principles, design, construction, and application of low capacity gas pressure control equipment; describe the types, operation, application, and handling of meters and correctors used in a gas network; describe the effect of pressure, temperature and altitude on a GMS; identify equipment and procedures for reading and interpreting gas metering equipment; and use equipment and procedures for gas meter reading.

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Collect and record gas metering data

Word  PDF

Version 1 This unit standard, unit standard 32041, and unit standard 32042 replaced unit standard 30381.

32040 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify equipment and procedures for reading and interpreting gas metering equipment and prepare for and collect gas metering data.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Demonstrate knowledge of standard gas pressure control equipment and metering stations

Word  PDF

Version 1 This unit standard, unit standard 32040, and unit standard 32042 replaced unit standard 30381.

32041 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of the types, principles, design, selection, handling and application of standard gas pressure control and metering equipment.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Describe gas metering equipment used in a gas network

Word  PDF

Version 1 This unit standard, unit standard 32040, and unit standard 32041 replaced unit standard 30381.

32042 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe: the types, operation, application, and handling of meters and electronic volume corrective devices used in a gas network; and describe the effect of pressure, temperature and altitude on a GMS.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Isolate and disconnect a low-capacity gas measurement system (GMS) in a gas network

Word  PDF

Version 1

32749 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of documentation, company procedures and hazards when isolating and disconnecting a low-capacity GMS in a gas network and isolate and disconnect a low-capacity GMS.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Level 4

Install, commission, and maintain mechanical gas flow correctors
This standard has expired and is no longer available.

Version 6

12455 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: install mechanical flow correctors in a gas distribution network; commission mechanical flow correctors in a gas distribution network; and maintain mechanical flow correctors in a gas distribution network; reinstate site; and complete reporting and documentation.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Install, commission, and maintain electronic gas flow correctors

Word  PDF

Version 7

12456 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of documentation, company procedures, hazards, and equipment to install, commission, and maintain electronic gas flow correctors; prepare, install, and commission an electronic gas flow corrector; maintain an electronic gas flow corrector; and complete reporting and documentation.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Test gas meters using a transfer prover
This standard has expired and is no longer available.

Version 4

19545 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: locate and identify procedures, documentation, and equipment for testing a gas meter using a transfer prover; prepare to and test gas meters using a transfer prover; and complete reporting and documentation for testing gas meters.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Remove and install a low capacity gas measurement system in a gas network

Word  PDF

Version 2 This unit standard replaced unit standard 12510 and unit standard 23085.

30382 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe the storage, handling, and transporting of a low capacity gas measurement system (GMS); demonstrate knowledge of documentation, company procedures, hazards and equipment for removing and installing a GMS; remove and install a low capacity GMS; and complete reporting and documentation.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Waihanga Ara Rau Construction and Infrastructure Workforce Development Council

Data as at 2024-03-28 23:01:08.54