Domain - Industrial Rope Access
TOP > Service Sector > Lifting Equipment > Industrial Rope Access
| 0 Qualifications | 32 Assessment Standards (24 Units & 8 Skills) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of and prepare to use basic safety harness systems on construction sites
This standard has expired and is no longer available.
Version 4
21969 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of different basic safety harness systems employed on construction sites; demonstrate knowledge of and inspect different types of basic safety harness and associated equipment, components and devices; and select, fit and connect basic safety harnesses and associated equipment on construction sites.
Standard-setting body:
Level 3
Use, install and disestablish temporary proprietary height safety systems when working at height
Version 5
15757 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - identify anchor points and prepare to install a temporary proprietary height safety system; - install horizontal and vertical temporary proprietary height safety systems; - use temporary proprietary height safety systems; and . disestablish temporary proprietary height safety systems.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Demonstrate knowledge of legislative requirements for the industrial rope access industry
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19358 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of legislative requirements for the industrial rope access industry.
Standard-setting body:
Identify, inspect and maintain height safety equipment
Version 4
19359 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to identify, inspect and maintain height safety equipment.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Plan and prepare for basic industrial rope access work
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19360 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . plan for basic industrial rope access work; and . prepare and inspect equipment for basic industrial rope access work.
Standard-setting body:
Set up and dismantle basic industrial rope access systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 4
19361 Unit Standard 14 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . prepare site for setting up basic industrial rope access system; . install basic industrial rope access system; . inspect basic industrial rope access system is safe to use; and . dismantle basic industrial rope access system.
Standard-setting body:
Prepare and use industrial rope access systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 4
19362 Unit Standard 14 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . prepare to use industrial rope access systems; . use industrial rope access systems; and . secure worksite, equipment and tools.
Standard-setting body:
Carry out simple patient recovery by rope techniques
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19363 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . assess the situation involving recovery by rope; . deploy recovery system and equipment; . prepare patient for descent; and . descend with patient and apply appropriate first aid and basic life support.
Standard-setting body:
Use safety harness system when working at height
Version 5
23229 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of the hazards associated with wearing a safety harness and associated equipment; - demonstrate knowledge of safety harnesses and associated systems and equipment; - check and fit a safety harness system; - use a safety harness system where a fall hazard exists at height; and - demonstrate knowledge of the rescue plan to be implemented in the event of a fall.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Prepare, install, inspect, use and dismantle basic industrial rope access systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 3
28898 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . prepare site for setting up basic industrial rope access system and communicate with supervisor; . install basic industrial rope access systems; . inspect basic industrial rope access systems to ensure these are safe for use; . source, prepare and check basic industrial rope access systems for carrying to the worksite; . use basic industrial rope access systems; . dismantle basic industrial rope access; and . secure the worksite, gear and equipment.
Standard-setting body:
Operate as a basic level industrial rope access technician
Version 1
41185 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Level 4
Identify and apply industrial rope access legislation and standards
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19364 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . identify and apply information from relevant standards for industrial rope access systems; . apply standards requirements for the selection, use, and maintenance of industrial rope access systems; and . apply legislative requirements to plan and prepare an industrial rope access system.
Standard-setting body:
Select and safely use industrial rope access equipment
This standard has expired and is no longer available.
Version 3
19365 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to select and safely use: ropes and slings, hardware, hand tools, portable power tools, and plant.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Plan and prepare for advanced industrial rope access work
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 4
19366 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to plan and prepare equipment for advanced industrial rope access work.
Standard-setting body:
Set up, alter, and dismantle industrial rope access systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19367 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . construct, inspect, and connect to anchor points; . prepare ropes; and . inspect as ready for use, and dismantle industrial rope access systems.
Standard-setting body:
Operate advanced industrial rope access systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19368 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . prepare and confirm equipment for use in advanced industrial rope access systems; . construct and operate advanced industrial rope access systems; . construct and operate improvised anchors; and . secure gear and site.
Standard-setting body:
Carry out advanced patient recovery techniques using industrial rope access systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5
19369 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . assess the situation involving retrieval by rope, and deploy appropriate equipment; . prepare patient for descent; . descend with patient and then apply appropriate first aid and basic life support; . set up and use hauling systems for retrieval purposes; and; . demonstrate lead climbing and aid traversing retrieval techniques.
Standard-setting body:
Prepare and review a safety plan when fall prevention controls are required for individuals working at height
Version 5
23231 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - assess the risks when work is to be undertaken at height and there is a fall potential; - prepare a safety plan to manage risk when fall prevention controls are required; and - review a safety plan to manage risk when fall prevention strategies are required.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Prepare an emergency rescue plan and perform a rescue to recover a suspended individual after a fall in a work context
Version 5
23232 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . evaluate emergency rescue methods for a suspended individual in a work context; . prepare an emergency rescue plan to recover a suspended individual in a work context; and . perform an emergency rescue of a suspended individual in a simulated environment under supervision.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Set up and operate rope access haulage systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2
31854 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: set up and confirm the safety of haulage systems; and operate a haulage system.
Standard-setting body:
Operate as an intermediate level industrial rope access technician
Version 1
41191 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Certify compliance of height safety equipment
Version 1
41195 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Perform high-angle casualty stabilisation rope access rescue
Version 1
41196 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Level 5
Prepare and use documentation for advanced industrial rope access work
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2
32195 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people working as advanced operators with extensive experience in the application of advanced techniques in industrial rope access work. People credited with this unit standard are able to: . prepare documentation for advanced industrial rope access work and; . use documentation to manage advanced rope access work and to communicate requirements of the work to the team.
Standard-setting body:
Design and obtain engineer certification for rope access work
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2
32196 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people working as advanced operators with extensive experience in the application of advanced techniques in industrial rope access work. People credited with this unit standard are able to: . explain the certification for industrial rope access work and fall protection systems; . carry out a needs analysis, and design layouts, for types of rope access systems; . obtain a Producer Statement Design (PS1) from a structural engineer (CPEng); . issue a Producer Statement Construction (PS3) from the installer; and . obtain a Producer Statement Construction Review (PS4) from a structural engineer (CPEng).
Standard-setting body:
Manage the selection and certification of anchors for rope access work
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2
32197 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people working as advanced operators with extensive experience in the application of advanced techniques in industrial rope access work. People credited with this unit standard are able to: . manage the selection and installation of proprietary systems for advanced rope access work; and . manage the design, installation and testing of prescribed systems for advanced rope access work.
Standard-setting body:
Design cableway systems for vertical, semi-vertical, and horizontal loads
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2
32198 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people working as advanced operators with extensive experience in the application of advanced techniques in industrial rope access work. People credited with this unit standard are able to: . perform cableway calculations for vertical, semi-vertical, and horizontal loads; and . design cableway systems for vertical, semi-vertical, and horizontal loads for carrying out advanced rope access work.
Standard-setting body:
Design, construct and operate heavy hauling systems for simple, compound, and complex lifts
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2
32199 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people working as advanced operators with extensive experience in the application of advanced techniques in industrial rope access work. People credited with this unit standards are able to: . design heavy hauling systems for simple, compound, and complex lifts; and . construct and operate heavy hauling systems for simple, compound, and complex lifts.
Standard-setting body:
Install anchor systems for industrial rope access
Version 1
41192 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Calculate and assess industrial rope haulage using rigging theory
Version 1
41193 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Manage industrial rope access safety, risk, and compliance
Version 1
41194 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Operate as an advanced level industrial rope access technician
Version 1
41197 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 120
Standard-setting body:
Data as at 2026-10-03 23:01:07.177
