Domain - Coachbuilding
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Motor Industry > Coachbuilding
| 0 Qualifications | 37 Assessment Standards (37 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
| Level 2 | ||||||
| 19635 | Unit |
Identify and maintain equipment used for coachbuilding operations This standard has expired and is no longer available. |
3 Credits | |||
| Level 3 | ||||||
| 10713 | Unit |
Carry out fixed glass installation to a vehicle This standard has expired and is no longer available. |
4 Credits | |||
| 10731 | Unit |
Carry out assembly of body components on a vehicle assembly line in the coachbuilding industry This standard has expired and is no longer available. |
10 Credits | |||
| 10756 | Unit |
Assemble parts on a vehicle chassis in the coachbuilding industry This standard has expired and is no longer available. |
10 Credits | |||
| 11708 | Unit |
Fit curtainsides, rails, and associated hardware to a vehicle body in the coachbuilding industry This standard has expired and is no longer available. |
3 Credits | |||
| 11709 | Unit |
Fit a range of exterior body parts to vehicles in the coachbuilding industry |
10 Credits |
|
||
| 11716 | Unit |
Fit interior fittings in vehicles in the coachbuilding industry |
10 Credits |
|
||
| 11717 | Unit |
Describe fits, tolerances and metal bending allowances and perform calculations in the coachbuilding industry |
3 Credits |
|
||
| 11718 | Unit |
Remove the rear of a vehicle cab for modification in the coachbuilding industry This standard has expired and is no longer available. |
3 Credits | |||
| 19633 | Unit |
Remove and refit or replace existing interior components from and to a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
10 Credits | |||
| 32155 | Unit |
Fit automotive glass in a vehicle in the coachbuilding industry |
6 Credits |
|
||
| 32156 | Unit |
Demonstrate knowledge of plumbing systems and gasfitting in the coachbuilding industry |
2 Credits |
|
||
| 32157 | Unit |
Install and test a plumbing system in a vehicle in the coachbuilding industry |
4 Credits |
|
||
| Level 4 | ||||||
| 10752 | Unit |
Carry out final quality checks on a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
6 Credits | |||
| 11695 | Unit |
Make and assemble a vehicle chassis drop section in the coachbuilding industry This standard has expired and is no longer available. |
5 Credits | |||
| 11697 | Unit |
Lengthen and shorten chassis on vehicles in the coachbuilding industry This standard has expired and is no longer available. |
6 Credits | |||
| 11698 | Unit |
Measure, mark out, cut, assemble, and fit body framing in the coachbuilding industry |
8 Credits |
|
||
| 11699 | Unit |
Measure, mark out, and make and assemble sub-frame for a vehicle in the coachbuilding industry |
6 Credits |
|
||
| 11700 | Unit |
Make and fit floor to a vehicle sub-frame in the coachbuilding industry |
6 Credits |
|
||
| 11701 | Unit |
Measure, mark out, cut, and fit exterior panels to vehicle framing |
7 Credits |
|
||
| 11702 | Unit |
Make and fit a vehicle door in the coachbuilding industry |
8 Credits |
|
||
| 11703 | Unit |
Make and fit vehicle steps in the coachbuilding industry |
5 Credits |
|
||
| 11704 | Unit |
Make and fit a flat deck and headboard on a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
6 Credits | |||
| 11705 | Unit |
Fit insulation and lining to a vehicle in the coachbuilding industry |
4 Credits |
|
||
| 11706 | Unit |
Make and fit a roof frame and panels to a vehicle in the coachbuilding industry |
7 Credits |
|
||
| 11707 | Unit |
Make and fit a wheel arch to a vehicle in the coachbuilding industry |
5 Credits |
|
||
| 11710 | Unit |
Identify vehicle body frame construction and body panelling in the coachbuilding industry |
4 Credits |
|
||
| 11711 | Unit |
Interpret vehicle drawings and job specifications for coachbuilding, and produce a sketch with relevant measurements |
4 Credits |
|
||
| 11712 | Unit |
Fit a tail lift to a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
4 Credits | |||
| 11714 | Unit |
Make and modify vehicle seat frames in the coachbuilding industry This standard has expired and is no longer available. |
5 Credits | |||
| 11715 | Unit |
Fit out the interior of a passenger service or motor home type vehicle |
8 Credits |
|
||
| 11719 | Unit |
Make and fit a draw beam to a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
5 Credits | |||
| 11721 | Unit |
Fit a hoist to a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
5 Credits | |||
| 19639 | Unit |
Describe trim and flooring adhesives used in the vehicle body manufacturing industry This standard has expired and is no longer available. |
6 Credits | |||
| 32987 | Unit |
Fit and test hydraulic or pneumatic components in the coachbuilding industry |
8 Credits |
|
||
| Level 5 | ||||||
| 11696 | Unit |
Lower and raise a chassis on a vehicle in the coachbuilding industry This standard has expired and is no longer available. |
10 Credits | |||
| 11713 | Unit |
Fit an additional axle to a vehicle chassis in the coachbuilding industry This standard has expired and is no longer available. |
6 Credits | |||