Domain - Vehicle Steering and Suspension

Domain - Vehicle Steering and Suspension

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Engineering and Technology > Motor Industry > Vehicle Steering and Suspension

Qualifications Domain-full

No qualifications currently registered at this level. Also check fields and sub-fields.

Assessment Standards

Hide education organisations, CMR & purpose  »

Level 2

Demonstrate knowledge of vehicle steering and suspension systems
This standard has expired and is no longer available.

Version 3 This unit standard and unit standard 24440 were replaced by unit standard 30566.

21721 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of vehicle steering systems, automotive suspension systems, and steering and suspension geometry.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Level 3

Demonstrate knowledge of heavy vehicle and machine power steering systems
This standard has expired and is no longer available.

Version 4 This unit standard and unit standard 24432 were replaced by unit standard 31231.

16112 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to demonstrate knowledge of: linkage type power-assisted steering systems; integral type power-assisted steering systems; an articulated type steering system; and a hydrostatic steering system.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of motorcycle wheel assemblies, and repair them
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 15472 have been replaced by unit standard 24403, unit standard 24404, and unit standard 24405.

2327 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of motorcycle wheel assemblies; diagnose the wheel assembly condition; repair a spoked wheel; and repair a composite construction wheel assembly.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of competition race vehicle steering and suspension systems to suit motorsport events
This standard has expired and is no longer available.

Version 2

23822 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of steering and suspension systems used on competition race vehicles.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose suspension and manual steering faults on light vehicles

Word  PDF

Version 2 This unit standard and unit standard 24564 replaced unit standard 896 and unit standard 15657.

24025 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to diagnose suspension and manual steering faults on light vehicles.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of, and the procedures for carrying out, vehicle wheel alignment

Word  PDF

Version 2

24026 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of vehicle wheel alignment, and procedures for carrying out a vehicle wheel alignment.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of motorcycle and all-terrain vehicle (ATV) wheel assemblies, tyres, and puncture repairs
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 24404, and unit standard 24405 replaced unit standard 2327 and unit standard 15472.

24403 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in motorcycle workshops and tyre fitting bays. People credited with this unit standard are able to demonstrate knowledge of: motorcycle and ATV wheel assemblies; motorcycle and ATV tyres; and repairing punctures on motorcycles and ATVs.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Repair motorcycle wheel assemblies
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 24403, and unit standard 24405 replaced unit standard 2327 and unit standard 15472.

24404 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: diagnose wheel assembly condition; repair a spoked wheel; and repair a composite construction wheel assembly.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of heavy vehicle suspension systems and identifying suspension failure
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 16112 were replaced by unit standard 31231. This unit standard and unit standard 24433 replaced unit standard 2315.

24432 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to demonstrate knowledge of heavy vehicle suspension systems, and identifying heavy vehicle suspension system failure.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of heavy machine and equipment suspension systems, and diagnosing system failure

Word  PDF

Version 2 This unit standard and unit standard 24435 replaced unit standard 2330.

24434 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: heavy machine and equipment suspension systems; and diagnosing heavy machine and equipment suspension system failure.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of tractor or machine wheel steering systems and fault diagnosis and repair procedures

Word  PDF

Version 2 This unit standard and unit standard 24439 replaced unit standard 5443.

24438 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: tractor or machine wheel steering systems; and diagnosing and repairing faults in tractor or machine steering systems.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of electric power steering (EPS) systems
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 21721 were replaced by unit standard 30566.

24440 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of EPS systems.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Remove and replace steering and suspension components on motor vehicles or machines
This standard has expired and is no longer available.

Version 3 This unit standard and unit standard 24025 replaced unit standard 896 and unit standard 15657. This unit standard was replaced by unit standard 30519.

24564 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to remove and replace steering and suspension components.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Service steering and suspension systems on a vehicle or machine

Word  PDF

Version 1 This unit standard replaced unit standard 24564.

30519 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to service steering and suspension systems on a vehicle or machine.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of steering and suspension systems

Word  PDF

Version 1 This unit standard replaced unit standard 21721 and unit standard 24440.

30566 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of steering and suspension systems, and steering geometry terms.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Check and adjust vehicle front and rear wheel alignment

Word  PDF

Version 5

883 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to carry out a pre-alignment check on a vehicle, check the steering angles of the front and rear wheels, and rectify incorrect front and rear wheel alignment.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Dismantle, inspect, and overhaul vehicle manual steering boxes and rack assemblies

Word  PDF

Version 5

884 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to dismantle, inspect, and overhaul a manual steering box and a manual steering rack assembly.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Level 4

Demonstrate knowledge of heavy vehicle and trailer wheel alignment procedures
This standard has expired and is no longer available.

Version 4 This unit standard was replaced by unit standard 31934.

15482 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to demonstrate knowledge of: wheel alignment pre-checking procedures for heavy vehicles and trailers; test methods for heavy vehicle wheel and axle alignment faults; and correction procedures for heavy vehicle wheel and axle alignment faults.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of machine track gear and undercarriage systems and their repair procedures

Word  PDF

Version 4

15483 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: tracked machine undercarriage misalignment; repair procedures for misalignment faults in undercarriage components; procedures to measure wear in track components to identify repair methods; and track gear repair procedures.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe, diagnose, and rectify faults in motorcycle frames, suspension, and steering systems
This standard has expired and is no longer available.

Version 5

2311 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of motorcycle frame, suspension, and steering construction; diagnose steering, suspension, and frame faults and their causes; and rectify machine frame, suspension, and steering faults.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Repair road transport heavy vehicle steering systems

Word  PDF

Version 5

2312 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: diagnose and rectify road transport heavy vehicle steering component faults; and check and adjust power assisted steering for road transport heavy vehicles.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe heavy vehicle suspension systems, analyse suspension failure, and repair components
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 24432 and unit standard 24433.

2315 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of heavy vehicle suspension systems, and identify, analyse, and repair heavy vehicle suspension system failure.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Describe heavy equipment suspension systems, and analyse and repair faults in them
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 24434 and unit standard 24435.

2330 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to: demonstrate knowledge of heavy equipment suspension systems; identify and analyse heavy equipment suspension component failure; and repair heavy equipment suspension components.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of heavy equipment clutch steering systems, and repair them
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 24436 and unit standard 24437.

2346 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to: demonstrate knowledge of clutch steering systems; diagnose machine clutch steering faults; and repair machine steering clutches.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of diagnosing and rectifying vehicle power-assisted steering system faults

Word  PDF

Version 2 This unit standard, unit standard 24427, and unit standard 24428 replaced unit standard 901.

24426 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: a power-assisted steering system; pressure and flow testing a power-assisted steering system; and rectifying faults in a power-assisted steering system.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Test, diagnose, and rectify vehicle hydraulic power-assisted steering system faults

Word  PDF

Version 2 This unit standard, unit standard 24426, and unit standard 24428 replaced unit standard 901.

24427 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: pressure test and diagnose faults in a hydraulic power-assisted steering system; and rectify faults in a hydraulic power-assisted steering system.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Overhaul a power steering pump

Word  PDF

Version 2 This unit standard, unit standard 24426, and unit standard 24427 replaced unit standard 901.

24428 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to overhaul a power steering pump.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of motorcycle frame, steering, and suspension systems

Word  PDF

Version 3 This unit standard, unit standard 24430, and unit standard 24431 replaced unit standard 2311.

24429 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: motorcycle frames; motorcycle steering systems; and motorcycle suspensions.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of diagnosing faults in motorcycle frame, steering, and suspension systems
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 24429, and unit standard 24431 replaced unit standard 2311.

24430 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of diagnosing: motorcycle frame, suspension, and steering faults.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose and rectify faults in motorcycle frames, steering, and suspension systems
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 24429, and unit standard 24430 replaced unit standard 2311.

24431 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to diagnose motorcycle steering, suspension, and frame faults and their causes, and rectify motorcycle frame, suspension, and steering faults.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose suspension failure on a heavy vehicle and repair components

Word  PDF

Version 2 This unit standard and unit standard 24432 replaced unit standard 2315.

24433 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify and diagnose heavy vehicle suspension system failure; and repair suspension system components.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Diagnose and repair faults in heavy machine and equipment suspension systems

Word  PDF

Version 2 This unit standard and unit standard 24434 replaced unit standard 2330.

24435 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify and analyse heavy machine and equipment suspension component failure; and repair heavy machine and equipment suspension components.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of heavy equipment clutch steering systems and fault diagnosis and repair procedures
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 24437 replaced unit standard 2346.

24436 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to demonstrate knowledge of heavy equipment clutch steering systems, and diagnosing and repairing heavy equipment clutch steering systems.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose faults and repair heavy equipment clutch steering systems
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 24436 replaced unit standard 2346.

24437 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to diagnose heavy equipment clutch steering faults, and repair heavy equipment steering clutches.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose and rectify faults in tractor or machine steering systems

Word  PDF

Version 2 This unit standard and unit standard 24438 replaced unit standard 5443.

24439 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the agricultural and heavy equipment industry. People credited with this unit standard are able to diagnose and rectify faults in tractor or machine steering systems.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Diagnose and rectify faults in steer axle and linkage systems on a forklift

Word  PDF

Version 2

24441 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to diagnose and rectify faults in steer axle and linkage systems on a forklift.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Remove and replace motorcycle steering and suspension components

Word  PDF

Version 3

24442 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to remove steering and suspension components from a motorcycle, and replace and adjust steering and suspension components on a motorcycle.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Diagnose and repair heavy vehicle or machine steering and suspension system faults

Word  PDF

Version 1

31219 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to diagnose and repair heavy vehicle or machine steering and suspension system faults.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe heavy vehicle and machine steering and suspension systems, and system diagnosis

Word  PDF

Version 1 This unit standard replaced unit standard 16112 and unit standard 24432.

31231 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe heavy vehicle and machine steering and suspension systems; and steering and suspension system diagnosis.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of heavy vehicle and trailer wheel and chassis alignment procedures

Word  PDF

Version 1 This unit standard replaced unit standard 15482.

31934 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of wheel alignment pre-check procedures for heavy vehicles and trailers, and checking chassis alignment; and describe procedures for carrying out a wheel alignment on heavy vehicles and trailers.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Check and rectify wheel alignment faults on heavy vehicles and trailers

Word  PDF

Version 2

31935 Unit Standard 14 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to carry out pre-alignment checks, perform a wheel alignment and rectify alignment faults on heavy vehicles and trailers.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Identify and inspect damage on a heavy vehicle or heavy trailer combination

Word  PDF

Version 1

31975 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify and inspect damage on a heavy vehicle or heavy trailer combination.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Disassemble, inspect, and overhaul power steering boxes and power steering rack assemblies

Word  PDF

Version 4

3398 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: disassemble and inspect power steering boxes and power steering rack assemblies; and overhaul power steering boxes and power rack assemblies.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of wheel tractor steering systems, and diagnose and rectify faults in them
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 24438 and unit standard 24439.

5443 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of wheel tractor steering systems; diagnose faults in tractor steering systems; and rectify faults in tractor steering systems.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose and rectify suspension and manual steering faults on cars or light commercial vehicles
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 15657 were replaced by unit standard 24025 and unit standard 24564.

896 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of suspension and steering terminology; diagnose suspension and manual steering system faults and their causes; and rectify suspension and manual steering system faults.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Diagnose and rectify vehicle power-assisted steering system faults
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 24426, unit standard 24427, and unit standard 24428.

901 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: pressure test a power assisted steering system; rectify faults in a power assisted steering system; and overhaul a power steering pump.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Repair track gear systems on machines

Word  PDF

Version 6

972 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify misalignment in a tracked machine undercarriage; measure wear in track components and determine repair procedures; and repair track gear.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Level 5

Demonstrate knowledge of fine tuning motorcycle steering, suspension, and frame
This standard has expired and is no longer available.

Version 2

21104 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of the requirements for fine tuning motorcycle steering, suspension, and frame systems; and procedures to carry out fine tuning of a motorcycle.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Demonstrate knowledge of fine tuning competition race vehicle steering and suspension systems to suit motorsport events
This standard has expired and is no longer available.

Version 2

23821 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of the requirements for fine tuning competition race vehicle steering and suspension systems; and procedures to carry out fine tuning of steering and suspension for a competition race vehicle.

Standard-setting body:

Te P?kenga - New Zealand Institute of Skills and Technology

Data as at 12 October 2024