Domain - Automotive Preventive Maintenance
TOP > Engineering and Technology > Motor Industry > Automotive Preventive Maintenance
| 0 Qualifications | 51 Assessment Standards (50 Units & 1 Skill) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of vehicle and/or machine storage procedures
This standard has expired and is no longer available.
Version 6
15407 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory based unit standard is suitable for people in automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of vehicle and/or machine requirements for storage, and of vehicle and/or machine storage checks.
Standard-setting body:
Select and apply lubricants and sealants in a marine environment
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24349 and unit standard 24377.
15409 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the marine repair industry. People credited with this unit standard are able to: demonstrate knowledge of marine lubricants and lubrication systems; select and apply a lubricant for a marine application; demonstrate knowledge of sealants; and select and apply a sealant for a marine application.
Standard-setting body:
Demonstrate knowledge of interchanging and balancing wheels in the automotive industry
Version 3
21679 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of interchanging vehicle or machine wheels, and balancing wheels and tyres.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Perform general servicing checks on a motor vehicle
Version 3
21690 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive service industry. People credited with this unit standard are able to carry out general servicing checks on a car or light commercial vehicle, change the engine oil and filter, and interchange the wheels.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select and apply lubricants and sealants for automotive and related industry applications
Version 3 This unit standard and unit standard 21680 replaced unit standard 245.
21716 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: select and apply a lubricant for an automotive or related industry application; and select and apply a sealant for an automotive or related industry application.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and refit road wheels on a vehicle
Version 5 This unit standard and unit standard 21722 replaced unit standard 238 and unit standard 3863.
21869 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove and refit road wheels on a vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify the general locations and functions of vehicle systems and main components
Version 11
229 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to identify the locations and layouts of systems and main components on vehicles, and demonstrate knowledge of the functions of vehicle systems and their main components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select and apply a lubricant and sealant for a motorcycle or all-terrain vehicle application
Version 2
24346 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to select and apply a lubricant and sealant for a motorcycle or all-terrain vehicle (ATV) application.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of marine lubricants and lubrication systems; and marine adhesives, sealants, and gaskets
Version 2 This unit standard and unit standard 24377 replaced unit standard 15409.
24349 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the marine repair industry. People credited with this unit standard are able to demonstrate knowledge of marine lubricants and lubrication systems; and marine adhesives, sealants, and gaskets.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select and apply lubricants, adhesives, and sealants in a marine environment
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24349 replaced unit standard 15409.
24377 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the marine repair industry. People credited with this unit standard are able to select and apply lubricants, and adhesive and sealant, for a marine application.
Standard-setting body:
Prepare a vehicle or machine for use, and shutdown after use
Version 10
247 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people who are required to use vehicles or machines as part of their job. People credited with this unit standard are able to check the engine readiness for use, check vehicle or machine readiness for use, and shutdown vehicle or machine after use.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Carry out general service checks in the motor industry
This standard has expired and is no longer available.
Version 5 This unit standard was replaced by unit standard 30434.
15406 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to carry out general service checks in the motor industry.
Standard-setting body:
Demonstrate knowledge of automotive lubricants and sealants
This standard has expired and is no longer available.
Version 4 This unit standard was replaced by unit standard 30478.
21680 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of automotive lubricants, lubrication systems, and sealants.
Standard-setting body:
Carry out general service checks on heavy vehicles or equipment
Version 5
2322 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out general service checks on heavy vehicles or equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out general service checks on systems and components of a motorcycle, and check a motorcycle for serviceability
Version 2
24268 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to carry out a service check on systems and components of a motorcycle and check a motorcycle for serviceability.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service bearings and seals in vehicles or equipment
Version 2
24338 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to inspect and service bearings and inspect and fit seals in vehicles or equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out general service checks on all-terrain vehicles (ATVs)
This standard has expired and is no longer available.
Version 2
24339 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to carry out general service checks on ATVs.
Standard-setting body:
Carry out a pre-delivery check, rectify defects, and complete the service on an all-terrain vehicle (ATV)
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 944 were replaced by unit standard 31436.
24340 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to carry out a pre-delivery check on an ATV; rectify any defects from the pre-delivery check, and complete the service.
Standard-setting body:
Carry out general service checks on non-electric forklifts and forklift attachments
Version 2
24341 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out general service checks on non-electric forklifts and forklift attachments.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out general service checks on electric forklifts and forklift attachments
Version 2
24342 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out general service checks on electric forklifts and forklift attachments.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out general service checks on chainsaws
This standard has expired and is no longer available.
Version 2
24344 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to carry out general service checks on chainsaws.
Standard-setting body:
Carry out general service checks on equipment used in the outdoor power equipment industry
This standard has expired and is no longer available.
Version 2
24345 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to carry out a general service check on equipment used in the outdoor power equipment industry.
Standard-setting body:
Service a vehicle or machine
Version 1 This unit standard replaced unit standard 15406.
30434 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are currently employed in the motor industry. People credited with this unit standard are able to carry out a service on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive diagnostic and repair procedures
Version 1
30885 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: diagnostic and repair procedures; on-board diagnostics (OBD); and controller area networking (CAN).
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of materials handling equipment attachments
Version 1
31272 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of materials handling equipment attachments.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of materials handling equipment masts and carriages
Version 1
31273 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of materials handling equipment masts and carriages; and describe diagnosis of faults in materials handling equipment masts and carriage faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe a materials handling machine frame
Version 1
31274 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe a materials handling machine frame.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of machine operator protective structures
Version 1
31279 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of machine operator protective structures.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of machine attachments and ground engagement devices
Version 1
31281 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of machine attachments and ground engagement devices.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of a pre-delivery inspection on a vehicle or machine
Version 1
31439 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of a pre-delivery inspection on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe automotive bearings
Version 1
31441 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe automotive bearings.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Store a vehicle or machine
This standard has expired and is no longer available.
Version 5
381 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: determine storage arrangements; prepare a vehicle or machine for storage; store and service a vehicle or machine; and re-commission a stored vehicle or machine to serviceable use.
Standard-setting body:
Carry out a pre-delivery check, rectify defects, and complete the service on a light vehicle
Version 5
942 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive service industries. People credited with this unit standard are able to carry out a pre-delivery check on a light vehicle; and rectify any defects from the pre-delivery check and complete the service.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out a pre-delivery check, rectify defects, and complete the service on a motorcycle
This standard has expired and is no longer available.
Version 5 This standard and unit standard 24340 were replaced by unit standard 31436.
944 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to carry out a pre-delivery check on a motorcycle; rectify any defects from the pre-delivery check, and complete the service.
Standard-setting body:
Level 4
Complete a pre-assessment of a motor vehicle to determine compliance with Certificate of Fitness requirements
Version 4
2347 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive industry who are required to pre-assess a motor vehicle for compliance with Certificate of Fitness (CoF) requirements prior to the vehicle being inspected by a Waka Kotahi Land Transport New Zealand certified Vehicle Inspector; it does not permit the candidate to issue or influence the issue of a CoF. People credited with this unit standard are able to determine CoF requirements of a motor vehicle and pre-assess a motor vehicle to determine compliance with CoF requirements.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out competition race vehicle preparation and maintenance requirements at a motorsport event
Version 2
23807 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people who work in a motorsport environment. People credited with this unit standard are able to determine competition race vehicle preparation requirements and prepare site; and carry out preparation and maintenance of the competition race vehicle before, during, and after the event.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in forklift masts
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31270. This unit standard replaced unit standard 15470.
23958 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the materials handling equipment repair industry. People credited with this unit standard are able to: diagnose faults on forklift masts; and rectify forklift mast defects.
Standard-setting body:
Carry out an annual safety inspection on a forklift, and complete an inspection report
Version 2
24343 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the materials handling equipment repair industry. People credited with this unit standard are able to prepare to carry out inspection; and to inspect and fill out the inspection report for: overhead guard, mast, frame, and attachments; engine and cooling system, transmission, electrical, and liquefied petroleum gas (LPG) requirements; battery electric forklift requirements; braking, steering, and wheel requirements; hydraulic requirements; and miscellaneous requirements; and complete the inspection report.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in machine ground engagement devices
Version 1
31262 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in machine ground engagement devices.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in materials handling equipment attachments
Version 1
31269 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in materials handling equipment attachments.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in materials handling equipment masts and carriages
Version 1 This unit standard replaced unit standard 23958.
31270 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in materials handling equipment masts and carriages.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of machine frame, undercarriage and track systems
Version 1
31280 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of machine frame, undercarriage and track systems; and diagnosing faults in machine undercarriage and track systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair a fault in a machine undercarriage system
Version 1
31390 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair a fault in a machine undercarriage system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out a pre-delivery inspection on a vehicle or machine
Version 1 This unit standard replaced unit standard 944 and unit standard 24340.
31436 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out a pre-delivery inspection on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of outdoor power equipment cutting systems, and describe their maintenance and fault diagnosis
Version 1
31891 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of outdoor power equipment cutting systems; and describe the maintenance and fault diagnosis of outdoor power equipment cutting systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Maintain outdoor power equipment cutting systems, and diagnose and repair faults
Version 1
31892 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: maintain outdoor power equipment cutting systems; and diagnose and repair faults in outdoor power equipment cutting systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of earth compacting machine systems, and describe their maintenance and fault diagnosis
Version 1
31900 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of earth compacting machine systems; and describe the maintenance and fault diagnosis of earth compacting machine systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Interpret maintenance product information in an automotive environment
Version 1
40094 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Analyse automotive preventive maintenance programmes
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24348 replaced unit standard 964.
24347 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive service industries. People credited with this unit standard are able to analyse automotive preventive maintenance programmes.
Standard-setting body:
Implement a schedule for an automotive preventive maintenance programme
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24347 replaced unit standard 964.
24348 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive service industries. People credited with this unit standard are able to determine the extent of and prepare to implement a preventive maintenance programme, and implement a preventive maintenance programme to suit a particular vehicle or machine.
Standard-setting body:
Implement a schedule for an automotive preventative maintenance programme
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24347 and unit standard 24348.
964 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive service industries. People credited with this unit standard are able to: demonstrate knowledge of preventative maintenance programmes; and implement a service schedule to suit a particular application.
Standard-setting body:
Data as at 18 January 2025