Domain - Pad Printing
TOP > Manufacturing > Printing > Pad Printing
| 0 Qualifications | 10 Assessment Standards (10 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Demonstrate introductory knowledge of pad printing
Version 3
24988 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of terms applicable to pad printing; describe halftones for pad printing; demonstrate knowledge of the machinery and equipment used in pad printing; and use reference material to ensure procedures are followed and required production standards are met.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare, handle, and store substrates used for pad printing
This standard is expiring. The last date for assessment to take place is 31 December 2025.
Version 3 This unit standard was replaced by unit standard 33238.
24989 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of substrates used for pad printing and the effects of workplace conditions on substrates; and prepare, handle, and store substrates used for pad printing.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Wash up a pad printing machine
Version 3
24990 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: select the most appropriate solvents for use in wash-up procedures for a pad printing machine; wash up a pad printing machine using the selected solvents, and undertake post-press tasks.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make ready a pad printing machine for single colour pad printing
This standard is expiring. The last date for assessment to take place is 31 December 2025.
Version 3 This unit standard was replaced by unit standard 33240.
24991 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: check documentation, and confirm requirements for the pad printing production job are available; prepare objects for pad printing; select and use inks and ink additives to meet the requirements of the job; install pads into pad printing machine; set up pad printing machine components onto machine bed; set up plate holder, plates, and pads; pre-set the inking system; load machine, position objects, unload safely, and set up drying racks; and take a print and prepare for production run.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Print single colour work on a pad printing machine
Version 3
24992 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of factors affecting printing standards for pad printing; print single colour pad printing work; identify and rectify or report problems; and carry out post-press tasks.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of colour and ink requirements for pad printing
Version 3
24993 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: colour theory and colour terms; inks and additives for pad printing; and ink drying systems and equipment used in pad printing.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make ready and print multi colour for pad printing
Version 3
24994 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: set up the register systems on the pad printing machine; set and position the plates and pads on the pad printing machine; undertake make-ready tasks for multi colour pad printing; and print multi colour pad printing work.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Handle substrates used for pad printing
Version 1 This unit standard replaced unit standard 24989.
33238 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of substrates used for pad printing and the effects of workplace conditions on substrates; and handle substrates used for pad printing safely.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make ready a pad printing machine for single colour printing
Version 1 This unit standard replaced unit standard 24991.
33240 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: check documentation and confirm requirements for the pad printing job are available; prepare objects for pad printing; set up pre- and post-treatment in-line processes for single colour pad printing; install pads into pad printing machine; set up pad printing machine components onto machine bed; select and use inks and ink additives, and pre-set the inking system; set up plate holder, plates, and pads, for printing; load pad printing machine, position objects, unload safely, and set up drying racks; and take a print and prepare for pad printing production run.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Solve problems in pad printing production
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 26729.
24995 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to apply a problem solving technique to solve pad printing problems in accordance with workplace practices.
Standard-setting body:
Data as at 24 January 2025