Domain - Welding
TOP > Engineering and Technology > Mechanical Engineering > Welding
| 0 Qualifications | 49 Assessment Standards (49 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of welding principles and quality control and safe welding practice under supervision
Version 4 This unit standard replaced unit standard 2670.
21907 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for the training of mechanical engineering and covers welding principles, quality assurance and safe welding practice under supervision at an introductory level. People credited with this unit standard are able to: demonstrate knowledge of welding principles; demonstrate knowledge of welding quality control; demonstrate safe welding practice under supervision to meet job specifications; and demonstrate knowledge of welding principles and quality assurance.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Avoid welding hazards with safe work practices
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 21907.
2670 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify the sources and nature of welding and cutting hazards; outline the obligations of employees and employers under the Health and Safety in Employment Act 1992; and avoid welding hazards with safe work practice. This unit standard is for entry level learners and new employees.
Standard-setting body:
Level 3
Gouge steel using the air carbon arc gouging process
Version 5
18106 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people using air carbon arc gouging for gouging steel with a hand-held torch. People credited with this unit standard are able to prepare to gouge steel using the air carbon arc gouging process; and gouge steel using the air carbon arc gouging process.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of welding and weld low carbon steel
Version 4
22906 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard provides a welding introduction that leads to a range of more specialised welding unit standards. People credited with this unit standard are able to: demonstrate knowledge of the effects of welding and weldability of ferrous metals; demonstrate knowledge of the MMAW process for welding low carbon steel; demonstrate knowledge of the GMAW and FCAW processes for welding low carbon steel; and weld low carbon steel.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate and apply knowledge of welding aluminium and stainless steel
Version 4
22907 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This introductory unit standard leads to material-specific sets of aluminium and stainless steel unit standards. People credited with this unit standard are able to: demonstrate knowledge of aluminium and stainless steel from a welding perspective; the GTAW process for welding aluminium and stainless steel; the GMAW process for welding aluminium; and weld aluminium and stainless steel.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of and apply metal cutting and gouging processes
Version 3
25783 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people cutting and gouging metal People credited with this unit standard are able to: demonstrate knowledge of: steel gas cutting and gouging; plasma arc cutting and gouging; air carbon arc gouging for steel; and cut and gouge metal.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in the downhand positions using the manual metal arc welding process
Version 8
2671 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures in the downhand positions using the manual metal arc welding (MMAW) process. People credited with this unit standard are able to: prepare to weld steel in the downhand positions using the MMAW process; weld steel in the downhand positions using the MMAW process; and inspect and repair structural steel MMAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel to a general purpose industry standard using the gas metal arc welding process
Version 8
2672 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel using the gas metal arc welding process (GMAW). People credited with this unit standard are able to: prepare to weld steel using the GMAW process; weld steel using the GMAW process; and inspect and repair GMAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in the downhand positions using the gas metal arc and flux cored arc welding processes
This standard has expired and is no longer available.
Version 7 This unit standard was replaced by unit standard 30282 and unit standard 30283.
2673 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard covers welding of steel structures in the downhand positions to NZS 4711:1984, AS/NZS 2980:2007, or equivalent, using the gas metal arc welding (GMAW) and flux cored arc welding (FCAW) processes. People credited with this unit standard are able to: prepare to weld steel in the downhand positions using the GMAW and FCAW processes; weld steel in the downhand positions using the GMAW and FCAW processes; and inspect and repair welds to industry standard.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld stainless steel plate in downhand positions using the gas metal arc and flux cored arc welding processes
Version 8
2674 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding stainless steel in downhand positions using the gas metal arc welding (GMAW) and flux cored arc welding (FCAW) processes. People credited with this unit standard are able to: prepare to weld stainless steel in downhand positions using the GMAW and FCAW processes; weld stainless steel in the downhand positions using the GMAW and FCAW processes; and inspect and repair GMAW and FCAW stainless steel plate welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld aluminium in downhand positions using the gas metal arc welding process
Version 8
2675 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding aluminium structures in downhand positions using the gas metal arc welding process (GMAW). People credited with this unit standard are able to: prepare to weld aluminium in the downhand positions using the GMAW process; weld aluminium in the downhand positions using the GMAW process; and inspect and repair aluminium GMAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld stainless steel sheet using the gas tungsten arc welding process
Version 9
2676 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding stainless steel sheet for the food, dairy, marine, and transport industries using the gas tungsten arc welding (GTAW) process. People credited with this unit standard are able to: prepare to weld stainless steel sheet using the GTAW process; weld stainless steel sheet using the GTAW process; and inspect and repair stainless steel sheet GTAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld aluminium in the downhand positions using the gas tungsten arc welding process
Version 8
2677 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding aluminium structures in the downhand positions using the gas tungsten arc welding process (GTAW). People credited with this unit standard are able to: prepare to weld aluminium in the downhand positions using the GTAW process; weld aluminium in the downhand positions using the GTAW process; and inspect and repair aluminium GTAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Join steel using the oxyacetylene welding process
Version 9
2678 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people fusion-welding steel using oxyacetylene welding equipment. People credited with this unit standard are able to: prepare to weld using the OAW process; join steel using the OAW process; and inspect and repair OAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Join metals using the torch brazing and soldering processes
This standard has expired and is no longer available.
Version 8
2679 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard covers torch brazing and soldering of several metals using a gas torch. People credited with this unit standard are able to: prepare to join metals using the torch brazing and soldering processes; join metals using the torch brazing and soldering processes; and inspect and repair brazed and soldered joints to industry standard.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Join metals using the resistance welding process
Version 8
2680 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people joining light gauge metals using the resistance welding (RW) process. People credited with this unit standard are able to: prepare to weld using the RW process; join metals using the RW process; and assess and repair RW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures using the submerged arc welding process
Version 8
2681 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures using the submerged arc welding (SAW) process. People credited with this unit standard are able to: prepare to weld steel using the SAW process; weld steel using the SAW process; and inspect SAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel in the downhand positions to a general purpose industry standard using the manual metal arc welding process
Version 8
2682 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel in down hand positions using the manual metal arc welding process (MMAW). People credited with this unit standard are able to: prepare to weld steel in the downhand positions using the MMAW process; weld steel using the MMAW process; and inspect and repair MMAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Cut metals using manual thermal processes
This standard has expired and is no longer available.
Version 7 This unit standard was replaced by unit standard 30279 and unit standard 30280.
2683 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the manual cutting of metals using the oxy-fuel and plasma arc cutting processes. People credited with this unit standard are able to: prepare to cut metals using manual thermal processes; cut metals using manual thermal processes; and control quality of the cut.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Join ferrous and non-ferrous metal components by torch brazing
Version 2
30080 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are required to join ferrous and non-ferrous metal components for engineering maintenance and fabrication operations. People credited with this unit standard are able to: demonstrate knowledge of torch brazing principles; prepare to torch braze metal components; join metals by torch brazing; assess and repair brazed joints; and complete brazing activities.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Cut steel using the manual gas cutting process
Version 2 This unit standard and unit standard 30280 replaced unit standard 2683.
30279 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit is for people using manual gas cutting process with portable equipment. People credited with this unit standard are able to: prepare to cut steel using the manual gas cutting process; and cut steel using the manual gas cutting process.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Cut metals using the manual plasma cutting process
Version 1 This unit standard and unit standard 30279 replaced unit standard 2683.
30280 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in industry. People credited with this unit standard are able to prepare to cut; and cut metal using the manual plasma cutting process to industry standard.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in the downhand positions using the gas shielded flux cored arc welding process
Version 2 This unit standard and unit standard 30283 replaced unit standard 2673.
30282 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures in the downhand positions using the gas shielded flux cored arc welding (FCAW) process. People credited with this unit standard are able to: prepare to weld steel in the downhand positions using the FCAW process; weld steel in the downhand positions using the FCAW process; and inspect and repair FCAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in the downhand positions using the gas metal arc welding process
Version 2 This unit standard and unit standard 30282 replaced unit standard 2673.
30283 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures in the downhand positions using the gas metal arc welding (GMAW) process. People credited with this unit standard are able to: prepare to weld steel in the downhand positions using the GMAW process; weld steel in the downhand positions using the GMAW process; and inspect and repair GMAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify and calculate trade calculations to solve problems for welding engineering trades
Version 1
33134 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for use in the training and assessment for welding engineering trades. People credited with this unit standard are able to: identify and calculate the effects of forces on components and structures; calculate size, volume, and mass of three dimensional objects; calculate the quantities of welding consumables required as per job specification.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of safety and health while welding and thermal cutting
Version 1 This unit standard replaced unit standard 29651.
33135 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people working with welding and thermal cutting equipment in the mechanical engineering, fabrication, or welding trades. People credited with this unit standard are able to describe immediate safety hazards and long term health hazards when welding or thermal cutting; explain personal protective equipment (PPE) used when welding or thermal cutting; describe the safe use of welding and thermal cutting equipment; demonstrate knowledge of the dangers and safety precautions when welding or thermal cutting in confined spaces; demonstrate knowledge of the dangers, control methods, and extraction of fumes when welding or thermal cutting.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Weld steel structures in all positions using the gas metal arc or flux cored arc welding processes
This standard has expired and is no longer available.
Version 7 This unit standard was replaced by unit standard 30277 and unit standard 30278.
2684 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard covers welding of steel structures in all positions to NZS 4711:1984, AS/NZS 2980:2007, or equivalent, using either the gas metal arc welding (GMAW) or flux cored arc welding (FCAW) process. People credited with this unit standard are able to: prepare to weld steel in all positions using the GMAW or FCAW process; weld steel in all positions using the GMAW or FCAW process; and inspect and repair welds to industry standard.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in all positions using the manual metal arc welding process
Version 8
2685 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures in all positions using the manual metal arc welding (MMAW) process. People credited with this unit standard are able to: prepare to weld steel in all positions using the MMAW process; weld steel in all positions using the MMAW process; and inspect and repair MMAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld aluminium in all positions using the gas metal arc welding process
Version 8
2686 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding aluminium structures in all positions using the gas metal arc welding process (GMAW). People credited with this unit standard are able to: prepare to weld aluminium in all positions using the GMAW process; weld aluminium in all positions using the GMAW process; and inspect and repair GMAW aluminium welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld stainless steel sheet and plate in position using the gas metal arc or flux cored arc welding process
Version 8
2687 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding stainless steel sheet and plate in position or equivalent. People credited with this unit standard are able to: prepare to weld stainless steel in position using the GMAW or FCAW process; weld stainless steel in position using the GMAW or FCAW process; and inspect and repair GMAW or FCAW stainless steel sheets and plate welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld stainless steel tube using the gas tungsten arc welding process
Version 9
2688 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding in position stainless steel tube using the gas tungsten arc welding (GTAW) process. People credited with this unit standard are able to: prepare to weld stainless steel tube in position using the GTAW process; weld stainless steel tube in position using the GTAW process; and inspect and repair stainless steel GTAW tube welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld aluminium in all positions using the gas tungsten arc welding process
Version 8
2689 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding aluminium structures in all positions using the gas tungsten arc welding process (GTAW). People credited with this unit standard are able to: prepare to weld; weld aluminium in all positions using the GTAW process; and inspect and repair aluminium GTAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel pipe using the oxyacetylene welding process
Version 8
2690 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel pipe using the oxyacetylene welding (OAW) process. People credited with this unit standard are able to: prepare to weld steel pipe using the OAW process; weld steel pipe using the OAW process; and inspect and repair pipe welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Cut metals using mechanised thermal cutting equipment
Version 7
2691 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people training to be engineering fabricators. People credited with this unit standard are able to - using mechanised thermal cutting equipment - prepare to cut metals; cut metals; and control quality of cuts made.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair non-ferrous metal components using welding processes
Version 8
2692 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people repairing non-ferrous metal components by welding, using gas metal arc welding (GMAW) and gas tungsten arc welding (GTAW) processes. People credited with this unit standard are able to: demonstrate knowledge of repair welding of non-ferrous metal components; prepare for repair welding of non-ferrous metal components; repair weld non-ferrous metal components; and perform quality control on repair weld.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair ferrous metal components using welding processes
Version 8
2693 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people repairing steel, stainless steel, and cast iron components by welding and powder spray processes. People credited with this unit standard are able to: demonstrate knowledge of repair-welding of ferrous metal components; prepare for repair-welding of ferrous metal components; repair-weld ferrous metal components; and perform quality control on repair-weld.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel pressure pipe using the manual metal arc welding process with cellulosic electrodes
Version 8
2694 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel pressure pipe using the manual metal arc welding (MMAW) process with cellulosic electrodes (stovepipe welding). People credited with this unit standard are able to: prepare to weld steel pressure pipe using the MMAW process with cellulosic electrodes; weld steel pressure pipe using the MMAW process with cellulosic electrodes; and inspect and repair welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel pressure pipe using the gas tungsten arc and manual metal arc welding processes
Version 8
2695 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel pressure pipe to ASME Boiler and Pressure Vessel Code using the gas tungsten arc welding process (GTAW) and the manual metal arc welding process (MMAW). People credited with this unit standard are able to: prepare to weld steel pressure pipe using the GTAW and the MMAW processes; weld steel pressure pipe using the GTAW and the MMAW processes; and inspect and repair GTAW and MMAW steel pressure pipe welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel or stainless steel pressure pipe in all positions using the gas tungsten arc welding process
Version 8
2696 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are welding steel or stainless steel pressure pipe in all positions using the gas tungsten arc welding (GTAW) process. People credited with this unit standard are able to: prepare to weld steel or stainless steel pressure pipe in all positions using the GTAW process; weld steel or stainless steel pressure pipe in all positions using the GTAW process; and inspect and repair GTAW pressure pipe welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld aluminium pipe in all positions using the gas tungsten arc welding process
Version 8
2697 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding aluminium pipe in all positions using the gas tungsten arc welding (GTAW) process. People credited with this unit standard are able to: prepare to weld aluminium pipe in all positions using the GTAW process; weld aluminium pipe in all positions using the GTAW process; and inspect and repair welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in all positions using the self-shielded flux cored arc welding processes
Version 2
30275 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel-structures in all positions using the self-shielded flux cored arc welding (FCAW) process. People credited with this unit standard are able to: prepare to weld steel in all positions using the self-shielded FCAW process; weld steel structures in all positions using the self-shielded FCAW process; and inspect and repair self-shielded FCAW welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in all positions using the flux cored arc welding processes
Version 3 This unit standard and unit standard 30278 replaced unit standard 2684.
30277 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures in all positions to Category SP of AS/NZS 1554.1, or equivalent, using the flux cored arc welding (FCAW) process. People credited with this unit standard are able to: prepare to weld steel in all positions using the FCAW process; weld steel structures in all positions using the FCAW process; and inspect and repair FCAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Weld steel structures in all positions using the gas metal arc welding process
Version 3 This unit standard and unit standard 30277 replaced unit standard 2684.
30278 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people welding steel structures in all positions using the gas metal arc welding (GMAW) process. People credited with this unit standard are able to: prepare to weld steel in all positions using the GMAW process; weld steel structures in all positions using the GMAW process; and inspect and repair GMAW steel welds.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Supervise welding operations
This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025.
Version 4
15134 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: plan welding operations; supervise welding operations; and control weld quality.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of welding metallurgy
This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025.
Version 3
18105 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: the role of carbon and manganese in weldable steels; the effects of welding on steels; and the weldability of metals.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of welding technology
This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025.
Version 3
18108 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of the physics of welding, and of welding and cutting processes.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the supervision of structural steel welding in accordance with AS 2214
This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025.
Version 3
26393 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard is for use in the training of supervisors of structural steel welding operations. The knowledge and skills represented by this unit standard align with the examination requirements specified in Australian Standard AS 2214, Certification of welding supervisors - Structural steel welding. People credited with this unit standard are able to demonstrate knowledge of: the general responsibilities and duties of a welding supervisor; welding and related processes, welding production, welding inspection and testing, and metallurgy for welding supervisors; and the application of AS/NZS 1554 in the welded fabrication of structural steel.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Cut metal using an automated cutting machine
Version 6
2698 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the setting up and operation of a single or multiple headed automated cutting machine used in the fabrication industry for sheet, plate, and pipe cutting. The cutting media may be fuel gases, oxy-acetylene, plasma arc, laser, water jets, or others. The machine may be numerically controlled or employ tracing devices. People credited with this unit standard are able to: maintain a safe worksite for automated machine cutting of metal; prepare for automated machine cutting of metal; cut metal using an automated machine; and apply quality assurance processes for automated machine cutting of metal.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 6
Design and manage welded construction
This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025.
Version 4
15133 Unit Standard 34 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: plan welding operations; manage welding operations; and control weld quality. This unit standard is aimed at people with professional engineering experience who have already achieved specialist skills in the industry.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-04-19 23:01:07.723