Domain - Vehicle Bodywork

Domain - Vehicle Bodywork

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Engineering and Technology > Motor Industry > Vehicle Bodywork

Qualifications Domain-full

No qualifications currently registered at this level. Also check fields and sub-fields.

Assessment Standards

Hide education organisations, CMR & purpose  »

Level 1

Plan the method of carrying out a job in the motor and related industries
This standard has expired and is no longer available.

Version 7

3860 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor or related industries. People credited with this unit standard are able to under supervision interpret the instructions received from the supervisor, and plan the job in the motor or related industries.

Standard-setting body:

MITO New Zealand Incorporated

Remove and replace road wheels in the motor industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard and unit standard 283 were replaced by unit standard 21869 and unit standard 21722.

3863 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or, who have recently started work in the motor industry. People credited with this unit standard are able to remove vehicle wheels, and replace vehicle wheels.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Start work in a new workplace in the motor and related industries
This standard has expired and is no longer available.

Version 8

3869 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have just started work in the motor and related industries. People credited with this unit standard are able to demonstrate good work habits and a good work attitude in the workplace in the motor and related industries.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of colours, paints, and finishing coats used in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 3872 have been replaced by unit standard 21696 and unit standard 21711.

3882 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to demonstrate knowledge of motor vehicle paint materials, and an understanding of colours and motor vehicle paints.

Standard-setting body:

MITO New Zealand Incorporated

Level 2

Identify, store and use hazardous materials in the motor and related industries
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 6 This unit standard was replaced by unit standard 21718 and unit standard 21700.

16097 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have recently started work in the motor or related industries. People credited with this unit standard are able to: identify hazardous materials in the workplace; store hazardous materials; and use hazardous materials in the workplace in the motor and related industries.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Perform safe work practices in the motor industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 6 This unit standard and unit standard 226 were replaced by unit standard unit standard 21858.

16098 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the motor and related industries. People credited with this unit standard are able to demonstrate: good work habits in the workplace; safe working practices; and good housekeeping practices in the motor and related industries.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Use and maintain power tools and equipment in the motor body industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 6 This unit standard was replaced by unit standard 21693 and unit standard 21713.

16099 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of power tools used in the motor body industry; use tools and equipment relevant to the workplace; and maintain tools and equipment.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Repair minor non-stretched panel damage and metal finish the repair in the motor body industry
This standard has expired and is no longer available.

Version 4 This unit standard and unit standard 3875 have been replaced by unit standard 21697 and unit standard 21695.

16100 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have just started work in the motor body industry. People credited with this unit standard are able to under supervision: demonstrate knowledge of hand tools used to remove a minor dent and of metal finishing in the motor body industry; prepare to repair minor panel damage in the motor body industry; and repair minor panel damage in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Prime, fill and sand a repair in the motor body industry
This standard has expired and is no longer available.

Version 4 This unit standard and unit standard 3868 have been replaced by unit standard 21703 and unit standard 21694.

16111 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of primers, and primer fillers in the motor body industry; prepare to prime and fill a panel; prime and fill the repair; and sand the repair in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of tools and equipment used in the collision repair industry

Word  PDF

Version 2 This unit standard and unit standard 21713 replaced unit standard 16099.

21693 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who wish to enter or are employed in the collision repair industry. People credited with this unit standard are able to demonstrate knowledge of tools and equipment used in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Mask, prime, fill and sand a panel repair in the motor body industry

Word  PDF

Version 2 This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard 16111.

21694 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: mask a panel for repair; and prime, fill and sand a panel repair in the motor body industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Apply finish coats of paint to a complete panel in the motor industry

Word  PDF

Version 2 This unit standard and unit standard 21711 replaced unit standard 3872 and unit standard 3882.

21696 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to apply finish coats of paint in the motor body industry; and apply the paint to a complete panel of a vehicle.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of exterior and interior motor body parts in the automotive industry

Word  PDF

Version 4 This unit standard and unit standard 21698 replaced unit standard 3861 and unit standard 3886.

21701 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: exterior motor vehicle body parts; and interior motor vehicle parts. They will also be able to identify seatbelt pretensioners and supplementary restraint system (SRS) component precautions.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Describe masking and primers in the collision repair industry

Word  PDF

Version 3

21703 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe: masking for primers; and, primers used, in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of removing and replacing damaged bolted-on motor body panels
This standard has expired and is no longer available.

Version 3 This unit standard and unit standard 21709 replaced unit standard 3862.

21704 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of bolted-on motor body panels, removing damaged bolted-on body panels, and fitting replacement bolted-on body panels.

Standard-setting body:

MITO New Zealand Incorporated

Use and maintain a suction feed spray gun in the motor body industry
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 21712 replaced unit standard 3881.

21706 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to use a suction feed spray gun, and maintain a suction feed spray gun in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of spray guns used in the motor body industry
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 21706 replaced unit standard 3881.

21712 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to demonstrate knowledge of spray guns used in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Use and maintain power tools and equipment in the motor body industry

Word  PDF

Version 2 This unit standard and unit standard 21693 replaced unit standard 16099.

21713 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: use tools and equipment relevant to the workplace in the motor body industry; and maintain tools and equipment in the motor body industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of fastening systems used in the automotive industry

Word  PDF

Version 3 This unit standard and unit standard 21715 replaced unit standard 3883.

21714 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of fastening systems used in the automotive industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace exterior motor body parts and fit body protection mouldings in the motor industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard and unit standard 3886 were replaced by unit standard 21698 and unit standard 21701.

3861 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of exterior motor vehicle body parts; remove exterior motor body parts; replace motor body parts; and fit motor body protection mouldings.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace damaged bolted on motor body panels in the motor body industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard was replaced by unit standard 21704 and unit standard 21709.

3862 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of bolted on motor body parts; prepare to remove bolted on panels; remove a bolted on body panel; prepare to fit new or repaired panel; and fit a new or repaired panel.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Fill and sand a repair in the motor body industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard was replaced by unit standard 21705 and unit standard 21710.

3865 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of motor body fillers; fill a motor body panel repair using polyester filler; and sand the filler.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Prepare a painted surface and feather edge paint damage in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 3870 have been replaced by unit standard 21702 and unit standard 21699.

3867 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of preparing a painted surface for painting in the motor body industry; prepare a painted surface for painting in the motor body industry; demonstrate knowledge of feather edging in the motor body industry; and feather edge the repair in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Mask a repair for priming in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 16111 have been replaced by unit standard 21703 and unit standard 21694.

3868 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of masking in the motor body industry; prepare to mask an area; and mask out an area for the application of primer in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Prepare bare metal for painting in the motor body industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard and unit standard 3867 were replaced by unit standard 21699 and unit standard 21702.

3870 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of materials used to prepare bare metal for painting in the motor body industry; and prepare the metal for painting in the motor body industry.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Apply finish coats of paint to a complete panel in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 3882 have been replaced by unit standard 21711 and unit standard 21696.

3872 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of finish coats in the motor body industry; prepare to apply finish coats of paint in the motor body industry; and apply the paint to the panel in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Flat off and cut and polish an acrylic lacquer painted surface in the motor body industry
This standard has expired and is no longer available.

Version 7

3873 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of cutting and polishing in the motor body industry; flat off a surface using abrasives; and cut and polish the surface in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Shrink a panel repair in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 16100 have been replaced by unit standard 21697 and unit standard 21695.

3875 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of procedures for shrinking a panel in the motor body industry; prepare to shrink a panel; and shrink the panel in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Fabricate a new panel in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard has been replaced by unit standard 24081 and unit standard 24082.

3876 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of fabricating a motor body panel; prepare to fabricate a motor body panel; and fabricate the motor body panel.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of and maintain equipment used in a motor body shop
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 228 have been replaced by unit standard 21669 and unit standard 21859.

3880 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to demonstrate knowledge of equipment used in the motor body industry, and maintain equipment under supervision.

Standard-setting body:

MITO New Zealand Incorporated

Identify spray guns and use and maintain a suction feed spray gun in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard has been replaced by unit standard 21712 and unit standard 21706.

3881 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate a knowledge of spray guns in the motor body industry; use a suction feed spray gun; and maintain a suction feed spray gun in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Identify and use fastening systems in the motor industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard was replaced by unit standard 21714 and unit standard 21715.

3883 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor industry. People credited with this unit standard are able to: demonstrate knowledge of fastening systems used in the motor industry; use metal fastening systems; use pop rivets; identify and use plastic and metal fastening systems; and identify and use adhesives.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of and use a MIG welding plant in the motor body industry
This standard has expired and is no longer available.

Version 9 This unit standard has been replaced by unit standard 21683 and unit standard 21684.

3884 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to demonstrate knowledge of the MIG welding process in the motor body industry, and MIG weld two pieces of metal at least 20 cm long under supervision.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 9 This unit standard and unit standard 230 were replaced by unit standard 21682 and unit standard 21685.

3885 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of the oxy-acetylene welding process in the motor body industry; prepare to weld a piece of steel; weld two pieces of steel; and join metal using brazing in the motor body industry.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace motor vehicle interior trim in the motor body industry
This standard has expired and is no longer available.

Version 7 This unit standard and unit standard 3861 have been replaced by unit standard 21701 and unit standard 21698.

3886 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of motor vehicle interior trim; remove and replace door fittings; and remove and replace interior trim in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Detail and groom a vehicle

Word  PDF

Version 6

399 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: detail exterior of the vehicle; buff, glaze, and polish the vehicle''s exterior paintwork; detail vehicle surfaces other than paint; and groom interior of the vehicle.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Maintain security in the workplace in the motor and related industries
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 8 This unit standard and unit standard 392 were replaced by unit standard 21673 and unit standard 21708.

5739 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the motor and related industries. Those credited with this unit standard are able to: demonstrate knowledge of the effect of loss in a workplace; carry out security procedures in the workplace; and carry out motor vehicle security procedures inside and outside the workshop.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of motor vehicle identification plates and specifications

Word  PDF

Version 7

5740 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of motor vehicle identification plates, and describe motor vehicle specifications.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Level 3

Identify, select, and use adhesives and sealants for vehicle bodywork applications
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 6 This unit standard was replaced by unit standard 22801 and unit standard 22802.

19632 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify the types and uses of adhesives used in the assembly of motor vehicle body components; use adhesives for bonding motor vehicle components; identify the types and uses of sealants used in the assembly of motor vehicle body components; and use sealants to seal and/or weatherproof joints as detailed in the job specification.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace exterior and interior motor body parts and trim in the motor industry
This standard has expired and is no longer available.

Version 3 This unit standard was replaced by unit standard 29574.

21698 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to remove and replace exterior motor body parts, remove and replace door fittings, and remove and replace interior trim in the motor body industry.

Standard-setting body:

MITO New Zealand Incorporated

Prepare a painted surface and bare metal for painting in the collision repair industry

Word  PDF

Version 3 This unit standard and unit standard 21702 replaced unit standard 3867 and unit standard 3870.

21699 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare a painted surface for painting; and prepare bare metal for painting, in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of preparing a vehicle body surface for painting, feather edging and preparing bare metal

Word  PDF

Version 3 This unit standard and unit standard 21699 replaced unit standard 3867 and unit standard 3870.

21702 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: preparing a vehicle body painted surface for painting; feather edging; and, preparing bare metal for painting, in the automotive industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of fillers, and filling and sanding a repair in the motor industry

Word  PDF

Version 2 This unit standard and unit standard 21710 replaced unit standard 3865.

21705 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of motor body fillers, and using body fillers to fill and sand a panel repair.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace a bolted-on motor body panel in the automotive industry

Word  PDF

Version 4 This unit standard and unit standard 21704 replaced unit standard 3862.

21709 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to remove and replace a bolted-on motor body panel in the automotive industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Prepare, apply and sand body filler for a motor body panel repair

Word  PDF

Version 3 This unit standard and unit standard 21705 replaced unit standard 3865.

21710 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare, apply and sand body filler for a motor body panel repair.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate safety precautions on vehicles fitted with air bags and seatbelt pre-tensioners

Word  PDF

Version 2 This unit standard and unit standard 22800 replaced unit standard 2629.

22799 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate safety precautions on vehicles fitted with air bags and seatbelt pre-tensioners.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of adhesives and sealants used in the automotive industry

Word  PDF

Version 3 This unit standard and unit standard 22802 replaced unit standard 19632.

22801 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of adhesives and sealants used in the automotive industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Use adhesives and sealants for vehicle bodywork applications

Word  PDF

Version 2 This unit standard and unit standard 22801 replaced unit standard 19632.

22802 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to use: adhesives for bonding motor vehicle components; and sealants to seal or weatherproof joints in vehicle bodywork.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of body requirements and regulations for competition race vehicles
This standard has expired and is no longer available.

Version 2

23816 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of body requirements and regulations for competition race vehicles.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of motor vehicle bumpers
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 23984, and unit standard 23985 replaced unit standard 5759. This unit standard was replaced by unit standard 29709.

23983 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in the motor industry. People credited with this unit standard are able to demonstrate knowledge of motor vehicle bumpers.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of motor vehicle fuel tanks and replacing fuel tanks

Word  PDF

Version 3 This unit standard and unit standard 23991 replaced unit standard 5768.

23990 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: motor vehicle fuel tanks; and removing and replacing a fuel tank.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace a motor vehicle fuel tank

Word  PDF

Version 2 This unit standard and unit standard 23990 replaced unit standard 5768.

23991 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the motor industry. People credited with this unit standard are able to remove and replace a motor vehicle fuel tank.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of vehicle body corrosion and anti-corrosion procedures in the collision repair industry

Word  PDF

Version 3 This unit standard and unit standard 23999 replaced unit standard 5746.

23998 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of vehicle body corrosion, and describe anti-corrosion procedures taken to protect vehicle bodies during manufacture and repair.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Reinstate vehicle body corrosion protection in the automotive industry

Word  PDF

Version 2 This unit standard and unit standard 23998 replaced unit standard 5746.

23999 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to reinstate vehicle body corrosion protection in the automotive industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of motor vehicle restraint systems
This standard has expired and is no longer available.

Version 2 This unit standard and unit standard 22800 were replaced by 30573.

24000 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people in the motor and related industries. People credited with this unit standard are able to demonstrate knowledge of: front air bag systems; air bag system diagnosis; seat belt systems; side air bag and air curtain systems; and discriminating restraint systems.

Standard-setting body:

MITO New Zealand Incorporated

Prepare and fabricate a new motor body panel in the motor body industry

Word  PDF

Version 2 This unit standard and unit standard 24082 replaced unit standard 3876.

24081 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to fabricate a motor body panel in the motor body industry; and fabricate the new motor body panel.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of fabricating a new motor body panel in the motor body industry

Word  PDF

Version 2 This unit standard and unit standard 24081 replaced unit standard 3876.

24082 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of fabricating a new motor body panel in the motor body industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of automotive glass

Word  PDF

Version 3

24085 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: automotive glass uses and types; handling and storing automotive glass; and preparing, removing and installing automotive glass.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of, and work in proximity to, motor vehicle air bag mechanisms
This standard has expired and is no longer available.

Version 6 This unit standard has been replaced by unit standard 22799 and unit standard 22800.

2629 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of air bag systems and their safety precautions, and demonstrate safety precautions on vehicles fitted with air bags.

Standard-setting body:

MITO New Zealand Incorporated

Use and maintain a spray gun to apply primer in the collision repair industry

Word  PDF

Version 1

29575 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who wish to enter or are employed in the collision repair industry. People credited with this unit standard are able to use a spray gun to apply primer, and maintain a spray gun in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Describe bolted-on motor body panels and motor vehicle bumpers

Word  PDF

Version 2 This unit standard replaced unit standard 23983.

29709 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe: bolted-on motor body panels; and motor vehicle bumpers.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Describe All-terrain vehicle (ATV) occupant safety systems

Word  PDF

Version 1

31442 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe ATV occupant safety systems.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Describe the effects of modifications on All-terrain vehicle (ATV) handling dynamics

Word  PDF

Version 1

31443 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe the effects of modifications on ATV handling dynamics.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Dismantle and store vehicle body components
This standard has expired and is no longer available.

Version 4

5434 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the vehicle dismantling and recycling industry. People credited with this unit standard are able to: complete administration requirements; remove and store vehicle interior trim and components; remove and store bolted-on and fastened-on panels; remove and store welded and bonded-on panels; remove and store vehicle exterior fittings; and remove and store vehicle windscreens, backlights, windows, and frames.

Standard-setting body:

MITO New Zealand Incorporated

Dismantle, clean, and store vehicle mechanical, electrical, and electronic components
This standard has expired and is no longer available.

Version 4

5465 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the dismantling and recycling industry. People credited with this unit standard are able to dismantle vehicle mechanical components; clean and store mechanical components; dismantle vehicle electrical and electronic components; and clean and store electrical and electronic components.

Standard-setting body:

MITO New Zealand Incorporated

Remove and replace light vehicle bolt-on mechanical components

Word  PDF

Version 4

5467 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to remove and replace: engine ancillary components; a vehicle transmission assembly; a vehicle rear axle assembly; and vehicle suspension components.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Install car and light commercial vehicle accessories in the motor body industry

Word  PDF

Version 4

5468 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine car and light commercial vehicle accessory installation requirements, and install car and light commercial vehicle accessories.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Locate and repair vehicle water leaks, rattles, and squeaks
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 22803 and unit standard 22927.

5469 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: isolate the fault in the vehicle; rectify water leak into vehicle; and rectify vehicle rattles and squeaks.

Standard-setting body:

MITO New Zealand Incorporated

Identify and prevent corrosion in the motor industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 7 This unit standard was replaced by unit standard 23998, and unit standard 23999.

5746 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the motor industry. Those credited with this unit standard are able to: demonstrate knowledge of corrosion; demonstrate knowledge of anti-corrosion procedures taken to protect vehicle bodies during and after manufacture; and carry out anti-corrosion procedures.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Identify and dispose of hazardous waste materials in the motor and related industries
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 7 This unit standard was replaced by unit standard 24083.

5763 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the motor industry. Those credited with this unit standard are able to: demonstrate knowledge of materials that constitute hazardous waste; store hazardous waste materials in the work premises ready for disposal; and dispose of hazardous waste.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of current legislation in the motor body industry
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 7 This unit standard was replaced by unit standard 23743.

5767 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory unit standard introduces people who have recently started work in the motor body industry to the legislative requirements of their workplace. People credited with this unit standard are able to demonstrate knowledge of current legislation, regulations, codes of practice and regulatory bodies relevant to their workplace.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and fit a windscreen and bonded glass to a vehicle
This standard has expired and is no longer available.

Version 6 This unit standard and unit standard 10713 have been replaced by unit standard 22798.

880 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair and glass industry. People credited with this unit standard are able to remove and fit windscreens and bonded glass to vehicles.

Standard-setting body:

MITO New Zealand Incorporated

Rectify faults associated with a motor vehicle body

Word  PDF

Version 5

882 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to correct the alignment of a door, bonnet, and boot lid, rectify dust leaks in a vehicle, and locate and rectify wind noise faults in a vehicle.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Prepare and install a sunroof to a vehicle
This standard has expired and is no longer available.

Version 5

911 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the automotive repair and glass industries. People credited with this unit standard are able to prepare to install a sunroof to a vehicle, and install a sunroof to a vehicle.

Standard-setting body:

MITO New Zealand Incorporated

Remove, repair, and replace vehicle body interior components

Word  PDF

Version 6

912 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to remove and replace a door window glass and other door hardware; and remove and replace seats, seatbelts, interior body trim, and carry out minor related repairs.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace fixed and movable automotive glass

Word  PDF

Version 5

945 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who wish to enter or are employed in the automotive and glazing industries. People credited with this unit standard are able to prepare to remove and replace fixed and moveable automotive glass, remove the existing glass from its aperture, and fit automotive glass.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Level 4

Remove and repair perforated non-structural body panel corrosion damage in the collision repair industry

Word  PDF

Version 3

19637 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to remove perforated non-structural body panel corrosion damage; and, remove and repair perforated non-structural body panel corrosion damage, in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Prepare and assemble vehicle body steel components by bonding

Word  PDF

Version 3

19638 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the coachbuilding or motor industries. People credited with this unit standard are able to prepare to assemble vehicle body steel components, assemble vehicle body steel components by bonding and prepare the assembled body components.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Repair panel damage and shrink a panel in the collision repair industry

Word  PDF

Version 3 This unit standard and unit standard 21697 replaced unit standard 3875 and unit standard 16100.

21695 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to repair panel damage, repair panel damage, prepare to shrink a panel, and shrink a panel, in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of repairing panel damage and shrinking a panel in the collision repair industry

Word  PDF

Version 3 This unit standard and unit standard 21695 replaced unit standard 3875 and unit standard 16100.

21697 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: repairing panel damage; and, shrinking a panel, in the collision repair industry.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of colours and finish coats in the motor industry

Word  PDF

Version 2 This unit standard and unit standard 21696 replaced unit standard 3872 and unit standard 3882.

21711 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in the motor industry. People credited with this unit standard are able to demonstrate knowledge of paint colours, and of motor vehicle finish coats.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and install direct glazed windscreens and side and rear glass on vehicles

Word  PDF

Version 2 This unit standard replaced unit standard 880 and unit standard 10713.

22798 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to remove and fit direct glazed windscreens and side and rear glass; remove direct glazed windscreens and side and rear glass; fit fixed direct glazed windscreens and side and rear glass; and check fitment of direct glazed windscreens and side and rear glass.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Describe safe working practices and precautions on vehicles equipped with air bags and seatbelt pre-tensioners
This standard is expiring. The last date for assessment to take place is 31 December 2021.

Word  PDF

Version 4 This unit standard and unit standard 24000 were replaced by unit standard 30573. This unit standard and unit standard 22799 replaced unit standard 2629.

22800 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in the motor industry. People credited with this unit standard are able to demonstrate knowledge of safe working practices and precautions on vehicles equipped with air bag systems, and on vehicles equipped with seatbelt pre-tensioners.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Locate and rectify vehicle interior water leaks

Word  PDF

Version 2 This unit standard and unit standard 22927 replaced unit standard 5469.

22803 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the collision repair and automotive glazing industries. People credited with this unit standard are able to locate the source and determine the cause of a water leak in a vehicle component or bodywork and rectify the water leak into the vehicle''s interior.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Locate and rectify vehicle body rattles, vibration, and squeaks

Word  PDF

Version 2 This unit standard and unit standard 22803 replaced unit standard 5469.

22927 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the collision repair industry. People credited with this unit standard are able to locate the source and determine the cause of the rattle, vibration or squeak in a vehicle body and rectify the rattle, vibration, or squeak in a vehicle body.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Diagnose faults in heavy vehicle and equipment chassis

Word  PDF

Version 4

2345 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to diagnose faults in heavy vehicle and equipment chassis.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of body design features for competition race vehicles
This standard has expired and is no longer available.

Version 2

23815 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of interior and exterior body design features installed on competition race vehicles.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of removing and replacing vehicle dashboard panels and adjacent fittings

Word  PDF

Version 2 This unit standard and unit standard 23981 replaced unit standard 5755.

23980 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of removing and replacing vehicle dashboard panels and adjacent fittings.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Remove and replace a vehicle dashboard panel

Word  PDF

Version 2 This unit standard and unit standard 23980 replaced unit standard 5755.

23981 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to remove and replace a vehicle dashboard panel.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of glass reinforced plastic (GRP) and working with GRP repair kits for motor vehicles

Word  PDF

Version 3 This unit standard and unit standard 23987 replaced unit standard 5764.

23986 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: GRP used for motor vehicles; and working with GRP repair kits for motor vehicles.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Repair a damaged motor vehicle panel using glass reinforced plastic (GRP)

Word  PDF

Version 3 This unit standard and unit standard 23986 replaced unit standard 5764.

23987 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to repair a damaged motor vehicle panel using GRP.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of automotive foams

Word  PDF

Version 2

24084 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of automotive foam uses and types; describe automotive foam safety and replacement; and describe preparing components and installing automotive foam in a motor vehicle.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Demonstrate knowledge of joining vehicle body components

Word  PDF

Version 1

31991 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of joining vehicle body components.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Install and repair all terrain vehicle (ATV) safety frames and auxiliary systems
This standard has expired and is no longer available.

Version 4

5442 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people in the motorcycle and agricultural engineering industries. People credited with this unit standard are able to: determine customer's requirements for installing components; fit safety frames and auxiliary systems; and repair safety frames and auxiliary systems.

Standard-setting body:

MITO New Zealand Incorporated

Remove and replace motor vehicle supplementary restraint systems
This standard has expired and is no longer available.

Version 6

5775 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the motor industry. People credited with this unit standard are able to remove and store an air bag, fit an air bag module in a vehicle, remove a seatbelt pre-tensioner from a vehicle, and fit a seatbelt pre-tensioner.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of vehicle bodywork construction

Word  PDF

Version 6

947 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This theory-based unit standard is for people who work in the motor industry. People credited with this unit standard are able to demonstrate knowledge of: vehicle body construction characteristics; body materials used on vehicles; body sealers and adhesives; and body protection treatments.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Level 5

Evaluate vehicle weight requirements, and calculate a vehicle weight from specifications
This standard has expired and is no longer available.

Version 5

11720 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work in the coachbuilding industry. People credited with this unit standard are able to evaluate vehicle weight requirements, and calculate vehicle weights from specifications for the coachbuilding industry.

Standard-setting body:

MITO New Zealand Incorporated

Demonstrate knowledge of vehicle body and structural design principles
This standard has expired and is no longer available.

Version 2

21097 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: vehicle body design concepts; factors influencing body and structural design; and manufacturer''s testing requirements, regulatory environment, and marketability factors in the design of vehicle bodies.

Standard-setting body:

MITO New Zealand Incorporated

Describe aluminium alloy vehicle body and structural components, and determine repair requirements
This standard has expired and is no longer available.

Version 2

21098 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: aluminium and vehicle aluminium alloy components, the procedures to repair structural damage on an aluminium alloy vehicle body, and welding aluminium alloy vehicle body components.

Standard-setting body:

MITO New Zealand Incorporated

Determine the effects and report on complex damage to vehicle body systems and structure
This standard has expired and is no longer available.

Version 2

21099 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of the effects of complex damage on vehicle body systems and structure, and complete a report detailing appropriate repair solutions to restore the vehicle to comply with legislative requirements.

Standard-setting body:

MITO New Zealand Incorporated

Determine and report on the repair solutions to restore a structurally damaged vehicle to a pre-accident state

Word  PDF

Version 1

31992 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine and report on the repair solutions to restore a structurally damaged vehicle to a pre-accident state.

Consent & Moderation Requirements:

CMR 14 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council MITO New Zealand Incorporated

Data as at 27 November 2021