Domain - Vehicle Bodywork
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Motor Industry > Vehicle Bodywork
| 0 Qualifications | 110 Assessment Standards (110 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
| Level 1 | ||||||
| 3857 | Unit |
Perform safe work practices in the motor body industry This standard has expired and is no longer available. |
1 Credits | |||
| 3860 | Unit |
Plan the method of carrying out a job in the motor and related industries This standard has expired and is no longer available. |
2 Credits | |||
| 3863 | Unit |
Remove and replace road wheels in the motor industry This standard has expired and is no longer available. |
1 Credits | |||
| 3869 | Unit |
Start work in a new workplace in the motor and related industries This standard has expired and is no longer available. |
2 Credits | |||
| 3882 | Unit |
Demonstrate knowledge of colours, paints, and finishing coats used in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| Level 2 | ||||||
| 16097 | Unit |
Identify, store and use hazardous materials in the motor and related industries This standard has expired and is no longer available. |
3 Credits | |||
| 16098 | Unit |
Perform safe work practices in the motor industry This standard has expired and is no longer available. |
4 Credits | |||
| 16099 | Unit |
Use and maintain power tools and equipment in the motor body industry This standard has expired and is no longer available. |
4 Credits | |||
| 16100 | Unit |
Repair minor non-stretched panel damage and metal finish the repair in the motor body industry This standard has expired and is no longer available. |
4 Credits | |||
| 16111 | Unit |
Prime, fill and sand a repair in the motor body industry This standard has expired and is no longer available. |
3 Credits | |||
| 21693 | Unit |
Demonstrate knowledge of tools and equipment used in the collision repair industry |
3 Credits |
|
||
| 21694 | Unit |
Mask, prime, fill and sand a panel repair in the motor body industry |
3 Credits |
|
||
| 21696 | Unit |
Apply finish coats of paint to a complete vehicle panel in the motor industry |
2 Credits |
|
||
| 21701 | Unit |
Demonstrate knowledge of exterior and interior motor body parts in the automotive industry |
2 Credits |
|
||
| 21703 | Unit |
Describe masking and primers in the collision repair industry |
2 Credits |
|
||
| 21704 | Unit |
Demonstrate knowledge of removing and replacing damaged bolted-on motor body panels This standard has expired and is no longer available. |
2 Credits | |||
| 21706 | Unit |
Use and maintain a suction feed spray gun in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 21712 | Unit |
Demonstrate knowledge of spray guns used in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 21713 | Unit |
Use and maintain power tools and equipment in the motor body industry |
3 Credits |
|
||
| 21714 | Unit |
Demonstrate knowledge of fastening systems used in the automotive industry |
2 Credits |
|
||
| 3854 | Unit |
Identify and avoid hazards in the motor body industry This standard has expired and is no longer available. |
1 Credits | |||
| 3855 | Unit |
Identify, store and use hazardous materials in the motor body industry This standard has expired and is no longer available. |
1 Credits | |||
| 3858 | Unit |
Use and maintain electrical tools and equipment in the motor body industry This standard has expired and is no longer available. |
1 Credits | |||
| 3859 | Unit |
Use and maintain compressed air tools and equipment in the motor body industry This standard has expired and is no longer available. |
1 Credits | |||
| 3861 | Unit |
Remove and replace exterior motor body parts and fit body protection mouldings in the motor industry This standard has expired and is no longer available. |
3 Credits | |||
| 3862 | Unit |
Remove and replace damaged bolted on motor body panels in the motor body industry This standard has expired and is no longer available. |
3 Credits | |||
| 3865 | Unit |
Fill and sand a repair in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3866 | Unit |
Repair minor non-stretched panel damage in the motor body industry This standard has expired and is no longer available. |
3 Credits | |||
| 3867 | Unit |
Prepare a painted surface and feather edge paint damage in the motor body industry This standard has expired and is no longer available. |
3 Credits | |||
| 3868 | Unit |
Mask a repair for priming in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3870 | Unit |
Prepare bare metal for painting in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3871 | Unit |
Prime, fill and sand a repair in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3872 | Unit |
Apply finish coats of paint to a complete panel in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3873 | Unit |
Flat off and cut and polish an acrylic lacquer painted surface in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3874 | Unit |
Apply undercoat in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3875 | Unit |
Shrink a panel repair in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3876 | Unit |
Fabricate a new panel in the motor body industry This standard has expired and is no longer available. |
5 Credits | |||
| 3878 | Unit |
Metal finish a panel in the motor body industry This standard has expired and is no longer available. |
4 Credits | |||
| 3880 | Unit |
Demonstrate knowledge of and maintain equipment used in a motor body shop This standard has expired and is no longer available. |
3 Credits | |||
| 3881 | Unit |
Identify spray guns and use and maintain a suction feed spray gun in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 3883 | Unit |
Identify and use fastening systems in the motor industry This standard has expired and is no longer available. |
4 Credits | |||
| 3884 | Unit |
Demonstrate knowledge of and use a MIG welding plant in the motor body industry This standard has expired and is no longer available. |
4 Credits | |||
| 3885 | Unit |
Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry This standard has expired and is no longer available. |
4 Credits | |||
| 3886 | Unit |
Remove and replace motor vehicle interior trim in the motor body industry This standard has expired and is no longer available. |
3 Credits | |||
| 399 | Unit |
Detail and groom a vehicle |
4 Credits |
|
||
| 5739 | Unit |
Maintain security in the workplace in the motor and related industries This standard has expired and is no longer available. |
2 Credits | |||
| 5740 | Unit |
Demonstrate knowledge of motor vehicle identification plates and specifications |
1 Credits |
|
||
| Level 3 | ||||||
| 19632 | Unit |
Identify, select, and use adhesives and sealants for vehicle bodywork applications This standard has expired and is no longer available. |
3 Credits | |||
| 21698 | Unit |
Remove and replace exterior and interior motor body parts and trim in the motor industry This standard has expired and is no longer available. |
3 Credits | |||
| 21699 | Unit |
Prepare a painted surface and bare metal for painting in the collision repair industry |
3 Credits |
|
||
| 21702 | Unit |
Demonstrate knowledge of preparing a vehicle body surface for painting, feather edging and preparing bare metal |
2 Credits |
|
||
| 21705 | Unit |
Demonstrate knowledge of fillers, and filling and sanding a repair in the motor industry |
2 Credits |
|
||
| 21709 | Unit |
Remove and replace a bolted-on motor body panel in the automotive industry |
3 Credits |
|
||
| 21710 | Unit |
Prepare, apply and sand body filler for a motor body panel repair |
1 Credits |
|
||
| 22799 | Unit |
Demonstrate safety precautions on vehicles fitted with air bags and seatbelt pre-tensioners |
1 Credits |
|
||
| 22801 | Unit |
Demonstrate knowledge of adhesives and sealants used in the automotive industry |
3 Credits |
|
||
| 22802 | Unit |
Use adhesives and sealants for vehicle bodywork applications |
3 Credits |
|
||
| 23816 | Unit |
Demonstrate knowledge of body requirements and regulations for competition race vehicles This standard has expired and is no longer available. |
3 Credits | |||
| 23983 | Unit |
Demonstrate knowledge of motor vehicle bumpers This standard has expired and is no longer available. |
2 Credits | |||
| 23990 | Unit |
Demonstrate knowledge of motor vehicle fuel tanks and replacing fuel tanks |
2 Credits |
|
||
| 23991 | Unit |
Remove and replace a motor vehicle fuel tank |
2 Credits |
|
||
| 23998 | Unit |
Demonstrate knowledge of vehicle body corrosion and anti-corrosion procedures in the collision repair industry |
4 Credits |
|
||
| 23999 | Unit |
Reinstate vehicle body corrosion protection in the automotive industry |
4 Credits |
|
||
| 24000 | Unit |
Demonstrate knowledge of motor vehicle restraint systems This standard has expired and is no longer available. |
5 Credits | |||
| 24081 | Unit |
Prepare and fabricate a new motor body panel in the motor body industry |
6 Credits |
|
||
| 24082 | Unit |
Demonstrate knowledge of fabricating a new motor body panel in the motor body industry |
2 Credits |
|
||
| 24085 | Unit |
Demonstrate knowledge of automotive glass |
2 Credits |
|
||
| 2629 | Unit |
Demonstrate knowledge of, and work in proximity to, motor vehicle air bag mechanisms This standard has expired and is no longer available. |
2 Credits | |||
| 29575 | Unit |
Use and maintain a spray gun to apply primer in the collision repair industry |
2 Credits |
|
||
| 29709 | Unit |
Describe bolted-on motor body panels and motor vehicle bumpers |
3 Credits |
|
||
| 31442 | Unit |
Describe All Terrain Vehicle (ATV) occupant safety systems |
2 Credits |
|
||
| 31443 | Unit |
Describe the effects of modifications on All Terrain Vehicle (ATV) handling dynamics |
2 Credits |
|
||
| 5434 | Unit |
Dismantle and store vehicle body components This standard has expired and is no longer available. |
10 Credits | |||
| 5465 | Unit |
Dismantle, clean, and store vehicle mechanical, electrical, and electronic components This standard has expired and is no longer available. |
4 Credits | |||
| 5467 | Unit |
Remove and replace light vehicle bolt-on mechanical components |
8 Credits |
|
||
| 5468 | Unit |
Install car and light commercial vehicle accessories in the motor body industry This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits |
|
||
| 5469 | Unit |
Locate and repair vehicle water leaks, rattles, and squeaks This standard has expired and is no longer available. |
4 Credits | |||
| 5746 | Unit |
Identify and prevent corrosion in the motor industry This standard has expired and is no longer available. |
3 Credits | |||
| 5763 | Unit |
Identify and dispose of hazardous waste materials in the motor and related industries This standard has expired and is no longer available. |
3 Credits | |||
| 5767 | Unit |
Demonstrate knowledge of current legislation in the motor body industry This standard has expired and is no longer available. |
2 Credits | |||
| 880 | Unit |
Remove and fit a windscreen and bonded glass to a vehicle This standard has expired and is no longer available. |
3 Credits | |||
| 882 | Unit |
Rectify faults associated with a motor vehicle body |
3 Credits |
|
||
| 911 | Unit |
Prepare and install a sunroof to a vehicle This standard has expired and is no longer available. |
4 Credits | |||
| 912 | Unit |
Remove, repair, and replace vehicle body interior components |
3 Credits |
|
||
| 945 | Unit |
Remove and replace fixed and movable automotive glass This standard is expiring. The last date for assessment to take place is 31 December 2027. |
8 Credits |
|
||
| Level 4 | ||||||
| 19637 | Unit |
Remove and repair perforated non-structural body panel corrosion damage in the collision repair industry |
3 Credits |
|
||
| 19638 | Unit |
Prepare and assemble vehicle body steel components by bonding |
6 Credits |
|
||
| 21695 | Unit |
Repair panel damage and shrink a panel in the collision repair industry |
3 Credits |
|
||
| 21697 | Unit |
Demonstrate knowledge of repairing panel damage and shrinking a panel in the collision repair industry |
2 Credits |
|
||
| 21711 | Unit |
Demonstrate knowledge of colours and finish coats in the motor industry |
4 Credits |
|
||
| 22798 | Unit |
Remove and install direct glazed windscreen and side and rear glass on a vehicle |
6 Credits |
|
||
| 22800 | Unit |
Describe safe working practices and precautions on vehicles equipped with air bags and seatbelt pre-tensioners This standard has expired and is no longer available. |
2 Credits | |||
| 22803 | Unit |
Locate and rectify vehicle interior water leaks |
2 Credits |
|
||
| 22927 | Unit |
Locate and rectify vehicle body rattle, or vibration, or squeak |
3 Credits |
|
||
| 2345 | Unit |
Diagnose faults in heavy vehicle and equipment chassis |
3 Credits |
|
||
| 23815 | Unit |
Demonstrate knowledge of body design features for competition race vehicles This standard has expired and is no longer available. |
5 Credits | |||
| 23980 | Unit |
Demonstrate knowledge of removing and replacing vehicle dashboard panels and adjacent fittings |
3 Credits |
|
||
| 23981 | Unit |
Remove and replace a vehicle dashboard panel |
5 Credits |
|
||
| 23986 | Unit |
Demonstrate knowledge of glass reinforced plastic (GRP) and working with GRP repair kits for motor vehicles |
2 Credits |
|
||
| 23987 | Unit |
Repair a damaged motor vehicle panel using glass reinforced plastic (GRP) |
2 Credits |
|
||
| 24084 | Unit |
Demonstrate knowledge of automotive foams |
2 Credits |
|
||
| 31991 | Unit |
Demonstrate knowledge of joining vehicle body components |
12 Credits |
|
||
| 5442 | Unit |
Install and repair all terrain vehicle (ATV) safety frames and auxiliary systems This standard has expired and is no longer available. |
4 Credits | |||
| 5775 | Unit |
Remove and replace motor vehicle supplementary restraint systems This standard has expired and is no longer available. |
6 Credits | |||
| 947 | Unit |
Demonstrate knowledge of vehicle bodywork construction |
6 Credits |
|
||
| Level 5 | ||||||
| 11720 | Unit |
Evaluate vehicle weight requirements, and calculate a vehicle weight from specifications This standard has expired and is no longer available. |
4 Credits | |||
| 21097 | Unit |
Demonstrate knowledge of vehicle body and structural design principles This standard has expired and is no longer available. |
6 Credits | |||
| 21098 | Unit |
Describe aluminium alloy vehicle body and structural components, and determine repair requirements This standard has expired and is no longer available. |
4 Credits | |||
| 21099 | Unit |
Determine the effects and report on complex damage to vehicle body systems and structure This standard has expired and is no longer available. |
6 Credits | |||
| 31992 | Unit |
Determine and report on the repair solutions to restore a structurally damaged vehicle to a pre-accident state |
5 Credits |
|
||