Domain - Electrical Installation and Maintenance
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Electrical Engineering > Electrical Installation and Maintenance
0 Qualifications | 120 Assessment Standards (120 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
Level 2 | ||||||
1181 | Unit |
Replace water-heating elements and thermostats This standard has expired and is no longer available. |
2 Credits | |||
1187 | Unit |
Use safe practices for rigging in the performance of electrical installation and maintenance This standard has expired and is no longer available. |
1 Credits | |||
2015 | Unit |
Join cables, up to low voltage rating This standard has expired and is no longer available. |
2 Credits | |||
5915 | Unit |
Repair and re-commission luminaires This standard has expired and is no longer available. |
2 Credits | |||
5916 | Unit |
Clean and service luminaires This standard has expired and is no longer available. |
2 Credits | |||
5917 | Unit |
Install and commission luminaires This standard has expired and is no longer available. |
2 Credits | |||
5920 | Unit |
Carry out gas welding procedures in the performance of electrical installation and maintenance This standard has expired and is no longer available. |
2 Credits | |||
5921 | Unit |
Carry out welding procedures in the performance of electrical installation and maintenance This standard has expired and is no longer available. |
2 Credits | |||
5922 | Unit |
Use cutting tools and machines in the performance of electrical installation and maintenance This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
5925 | Unit |
Recognise the requirements of routine maintenance of electrical equipment This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
6627 | Unit |
Shift loads using lifting equipment in the performance of electrical installation and maintenance This standard has expired and is no longer available. |
2 Credits | |||
752 | Unit |
Identify and describe typical installation methods, and install common electrical cables This standard has expired and is no longer available. |
3 Credits | |||
755 | Unit |
Install and replace fuse links and miniature circuit-breakers This standard has expired and is no longer available. |
1 Credits | |||
Level 3 | ||||||
1196 | Unit |
Service electrical control components This standard has expired and is no longer available. |
3 Credits | |||
1204 | Unit |
Demonstrate knowledge of earthing This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
1205 | Unit |
Demonstrate knowledge of electrical switchboards This standard has expired and is no longer available. |
3 Credits | |||
15855 | Unit |
Demonstrate knowledge of circuit protection This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
15859 | Unit |
Demonstrate knowledge of electrical cables and accessories This standard is expiring. The last date for assessment to take place is 31 December 2027. |
7 Credits | |||
15867 | Unit |
Install, wire, and test lights in existing installations This standard has expired and is no longer available. |
5 Credits | |||
15868 | Unit |
Install, wire, and test power outlets in existing installations This standard has expired and is no longer available. |
5 Credits | |||
16408 | Unit |
Pre-wire an electrical installation This standard has expired and is no longer available. |
5 Credits | |||
16409 | Unit |
Fit-off an electrical installation This standard has expired and is no longer available. |
5 Credits | |||
16412 | Unit |
Fault-find, repair, and re-commission electric lighting This standard is expiring. The last date for assessment to take place is 31 December 2027. |
4 Credits | |||
2016 | Unit |
Install earthing systems for multiple earthed neutral installations This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
2019 | Unit |
Perform routine maintenance of electrical equipment This standard has expired and is no longer available. |
6 Credits | |||
2020 | Unit |
Plan and install cable support systems This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
2022 | Unit |
Install cables and conductors This standard has expired and is no longer available. |
5 Credits | |||
2023 | Unit |
Determine and connect electrical circuits This standard has expired and is no longer available. |
5 Credits | |||
2027 | Unit |
Test an electrical installation for compliance with regulations This standard has expired and is no longer available. |
3 Credits | |||
2028 | Unit |
Install extra-low-voltage equipment This standard has expired and is no longer available. |
3 Credits | |||
29468 | Unit |
Demonstrate and apply knowledge of safe plant isolation, re-commissioning, and associated electrical testing procedures This standard is expiring. The last date for assessment to take place is 31 December 2027. |
5 Credits | |||
29470 | Unit |
Demonstrate knowledge of electric motor and generator construction and operation This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29471 | Unit |
Demonstrate knowledge of electric switchboards and lighting and power circuits |
2 Credits | |||
29472 | Unit |
Demonstrate knowledge of electric lighting systems This standard is expiring. The last date for assessment to take place is 31 December 2027. |
6 Credits | |||
29474 | Unit |
Demonstrate and apply knowledge of electrical fittings and components and their installation |
6 Credits | |||
29481 | Unit |
Apply knowledge of lighting installation, testing, repair, and disposal |
5 Credits | |||
29482 | Unit |
Demonstrate and apply knowledge of special power supplies This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
5919 | Unit |
Install and repair pipe-work in the performance of electrical installation and maintenance This standard has expired and is no longer available. |
3 Credits | |||
Level 4 | ||||||
10782 | Unit |
Install, commission, and maintain battery backup and emergency lighting systems This standard has expired and is no longer available. |
3 Credits | |||
10784 | Unit |
Overhaul electric space heating systems up to 10 kilowatts rating This standard has expired and is no longer available. |
3 Credits | |||
10785 | Unit |
Overhaul electrical systems in air-conditioning and air handling equipment This standard has expired and is no longer available. |
3 Credits | |||
10786 | Unit |
Overhaul electromagnetic switching devices This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
10787 | Unit |
Install and test transducers This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
10788 | Unit |
Operate industrial high voltage distribution systems This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
10789 | Unit |
Install, commission, and maintain an uninterruptible power supply (UPS) system This standard is expiring. The last date for assessment to take place is 31 December 2027. |
4 Credits | |||
15863 | Unit |
Demonstrate knowledge of a.c. electric motor connections, starters, and speed controllers This standard has expired and is no longer available. |
4 Credits | |||
15866 | Unit |
Demonstrate and apply knowledge of and the procedures for the examination of and testing of electrical installations This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
15869 | Unit |
Install electrical equipment in damp situations This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
15870 | Unit |
Inspect and test an electrical installation for compliance with AS/NZS 3000 This standard is expiring. The last date for assessment to take place is 31 December 2027. |
5 Credits | |||
15871 | Unit |
Demonstrate knowledge of electrical installation in damp situations This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
16410 | Unit |
Plan, install, test, and commission small electrical installations This standard has expired and is no longer available. |
5 Credits | |||
16414 | Unit |
Carry out planned electrical maintenance work of electrical equipment This standard has expired and is no longer available. |
6 Credits | |||
16415 | Unit |
Install and commission extra-low voltage equipment This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
1708 | Unit |
Select circuit protection devices This standard has expired and is no longer available. |
2 Credits | |||
1710 | Unit |
Demonstrate knowledge of electric lighting This standard has expired and is no longer available. |
3 Credits | |||
2011 | Unit |
Design, plan and complete a small electrical installation This standard has expired and is no longer available. |
9 Credits | |||
2013 | Unit |
Install and commission a.c. rotating machines This standard has expired and is no longer available. |
5 Credits | |||
2018 | Unit |
Install electrical equipment and accessories in damp areas This standard has expired and is no longer available. |
2 Credits | |||
2021 | Unit |
Plan, install, and commission a power supply on a construction or demolition site This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
2025 | Unit |
Select cables and flexible cords for installation This standard has expired and is no longer available. |
2 Credits | |||
20962 | Unit |
Demonstrate knowledge of a.c. electric motor control and installation This standard has expired and is no longer available. |
8 Credits | |||
29419 | Unit |
Prepare for, install, test, and commission new electrical installations This standard is expiring. The last date for assessment to take place is 31 December 2027. |
10 Credits | |||
29422 | Unit |
Install, wire, test and fault-find, and repair power outlets and electric lighting systems in existing installations This standard is expiring. The last date for assessment to take place is 31 December 2027. |
7 Credits | |||
29423 | Unit |
Carry out planned maintenance of electrical equipment This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
29424 | Unit |
Install, commission, and maintain emergency lighting systems This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29426 | Unit |
Follow a control drawing and install, wire, and commission a control panel This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
29428 | Unit |
Install, test, and commission a.c. rotating machines This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29430 | Unit |
Select and install industrial electric switchboards This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
29431 | Unit |
Select and install electric motor starters This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29432 | Unit |
Select, install, and commission a variable frequency drive This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29433 | Unit |
Install, wire to, and connect a machine safety device This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29434 | Unit |
Install and programme a PLC This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
29435 | Unit |
Install computer networking infrastructure systems This standard is expiring. The last date for assessment to take place is 31 December 2027. |
4 Credits | |||
29436 | Unit |
Wire and connect control devices used in the electrical environment This standard is expiring. The last date for assessment to take place is 31 December 2027. |
4 Credits | |||
29438 | Unit |
Install, commission, and maintain a power quality protection system This standard is expiring. The last date for assessment to take place is 31 December 2027. |
4 Credits | |||
29439 | Unit |
Schedule and manage preventative maintenance for domestic or commercial electrical equipment This standard is expiring. The last date for assessment to take place is 31 December 2027. |
5 Credits | |||
29446 | Unit |
Demonstrate knowledge of computer networking infrastructure principles This standard is expiring. The last date for assessment to take place is 31 December 2027. |
2 Credits | |||
32624 | Unit |
Demonstrate knowledge of electrical installation testing, fault finding, and rectification of discovered faults |
6 Credits | |||
32630 | Unit |
Establish new worksites and interpret plans |
4 Credits | |||
32631 | Unit |
Install, join, and terminate cables |
7 Credits | |||
32632 | Unit |
Design switching circuits and a PLC programme |
4 Credits | |||
32633 | Unit |
Install electrical equipment in damp situations and install earthing and lighting |
9 Credits | |||
32634 | Unit |
Plan circuit protection, and install and test distribution boards |
10 Credits | |||
32635 | Unit |
Use fault finding and fault rectification techniques on electrical installations |
4 Credits | |||
32642 | Unit |
Demonstrate knowledge of de-commissioning, commissioning, and verification of electrical installations |
6 Credits | |||
32643 | Unit |
Demonstrate knowledge of alternative energy systems |
3 Credits | |||
32644 | Unit |
Demonstrate knowledge of hazardous areas, construction and demolition sites, and special electrical installations |
5 Credits | |||
32646 | Unit |
Select cables for different applications |
3 Credits | |||
32647 | Unit |
Install mains and submains cables |
5 Credits | |||
32648 | Unit |
Install a main switchboard |
5 Credits | |||
32649 | Unit |
Install electric motors and diagnose and repair faults |
5 Credits | |||
32650 | Unit |
Install a complete electrical installation |
10 Credits | |||
32651 | Unit |
Carry out verification of an electrical installation |
5 Credits | |||
32652 | Unit |
De-commission and commission electrical installations |
6 Credits | |||
32653 | Unit |
Maintain electrical installations |
5 Credits | |||
5924 | Unit |
Install and commission d.c. rotating machines This standard is expiring. The last date for assessment to take place is 31 December 2027. |
5 Credits | |||
5931 | Unit |
Select and install domestic or commercial electric switchboards This standard is expiring. The last date for assessment to take place is 31 December 2027. |
3 Credits | |||
6628 | Unit |
Select motor starters or motor speed controllers for given applications This standard has expired and is no longer available. |
4 Credits | |||
Level 5 | ||||||
10783 | Unit |
Install, commission, and maintain generating sets driven by combustion engines This standard is expiring. The last date for assessment to take place is 31 December 2025. |
10 Credits | |||
19001 | Unit |
Demonstrate advanced knowledge of electrical circuit protection This standard is expiring. The last date for assessment to take place is 31 December 2025. |
3 Credits | |||
19002 | Unit |
Demonstrate advanced knowledge of electrical switchgear and switchboards This standard is expiring. The last date for assessment to take place is 31 December 2025. |
5 Credits | |||
19003 | Unit |
Demonstrate advanced knowledge of electrical installation practice This standard has expired and is no longer available. |
6 Credits | |||
19004 | Unit |
Demonstrate knowledge of standby power plant This standard is expiring. The last date for assessment to take place is 31 December 2025. |
4 Credits | |||
19005 | Unit |
Demonstrate knowledge of electric welding principles and applications This standard has expired and is no longer available. |
3 Credits | |||
19006 | Unit |
Design simple electric lighting installations This standard is expiring. The last date for assessment to take place is 31 December 2025. |
5 Credits | |||
19007 | Unit |
Demonstrate knowledge of electric furnaces and space heaters This standard has expired and is no longer available. |
4 Credits | |||
19008 | Unit |
Prepare quotations for electrical work This standard has expired and is no longer available. |
5 Credits | |||
19010 | Unit |
Manage scheduled electrical maintenance projects This standard has expired and is no longer available. |
15 Credits | |||
19012 | Unit |
Develop commissioning programmes for electrical projects This standard has expired and is no longer available. |
10 Credits | |||
2030 | Unit |
Schedule and manage preventative maintenance for industrial electrical equipment This standard is expiring. The last date for assessment to take place is 31 December 2027. |
6 Credits | |||
25631 | Unit |
Demonstrate knowledge of and design documentation for the commissioning of significant electrical installations This standard is expiring. The last date for assessment to take place is 31 December 2025. |
5 Credits | |||
25632 | Unit |
Demonstrate and apply advanced knowledge of the selection, use, and care of complex electrical measuring equipment This standard has expired and is no longer available. |
5 Credits | |||
25634 | Unit |
Demonstrate advanced knowledge of electrical installation practice and knowledge of data communication principles This standard is expiring. The last date for assessment to take place is 31 December 2025. |
10 Credits | |||
25635 | Unit |
Develop, implement, and review maintenance plans for electrical engineering systems This standard has expired and is no longer available. |
15 Credits | |||
25636 | Unit |
Manage testing and measuring procedures within electrical engineering contexts This standard has expired and is no longer available. |
5 Credits | |||
25637 | Unit |
Develop a plan for and manage an electrical engineering project This standard has expired and is no longer available. |
20 Credits | |||
25639 | Unit |
Develop resource procurement options for a significant electrical project and make recommendations This standard has expired and is no longer available. |
5 Credits | |||
25641 | Unit |
Demonstrate knowledge of electrical heating systems This standard has expired and is no longer available. |
4 Credits | |||
Level 6 | ||||||
19011 | Unit |
Manage electrical installation projects This standard has expired and is no longer available. |
15 Credits | |||
19013 | Unit |
Manage commissioning of electrical installations This standard has expired and is no longer available. |
15 Credits |