Domain - Automotive Workshop Engineering
TOP > Engineering and Technology > Motor Industry > Automotive Workshop Engineering
| 0 Qualifications | 60 Assessment Standards (60 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of exhaust shop equipment
This standard has expired and is no longer available.
Version 4
11737 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the exhaust repair and manufacturing industry. People credited with this unit standard are able to demonstrate knowledge of: exhaust tube bending machines; vehicle lifting equipment; tube cutting equipment and its application; and an exhaust shop safe working environment.
Standard-setting body:
Inspect and repair hand push mowers
This standard has expired and is no longer available.
Version 5
15425 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect hand push mowers for condition, and repair and/or replace push mower components.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out general engineering tasks in the automotive industry
Version 3 This unit standard and unit standard 21670 replaced unit standard 227 and unit standard 3879.
21671 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to assemble and secure components, drill holes in materials, use hand threading tools to repair a component, remove a broken stud and insert new stud, and use a grinder in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of an oxy-acetylene welding plant in the motor industry
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 21683 were replaced by unit standard 30570. This unit standard and unit standard 21685 replaced unit standard 230 and unit standard 3885.
21682 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who are at pre-employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to demonstrate knowledge of the oxy-acetylene welding process in the motor industry, and welding faults.
Standard-setting body:
Use the oxyacetylene welding process in the automotive industry
Version 2 This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.
21685 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people who are at pre-employment level or who have recently started work in the automotive industry. People credited with this unit standard are able to: prepare to weld using the oxyacetylene welding (OAW) process; join two pieces of steel; and braze metal using the OAW process in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Store and use hazardous materials in the automotive and related industries
Version 3 This unit standard and unit standard 21718 replaced unit standard 16097.
21700 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to store hazardous materials, and use hazardous materials in the workplace in the automotive and related industries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select and use fastening systems in the automotive industry
Version 4 This unit standard and unit standard 21714 replaced unit standard 3883.
21715 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to select and use metal fastening systems; use pop rivets; select and use plastic fastening systems; and, select and apply adhesives, in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hazardous materials used in the automotive industry
Version 3 This unit standard and unit standard 21700 replaced unit standard 16097.
21718 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of materials that constitute hazardous waste, and of using and storing hazardous materials in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate good work habits and perform safe work practices in the motor and related industries
This standard has expired and is no longer available.
Version 2 This unit standard, 249 and 16113 were replaced by unit standards 29579 and 29580.
21858 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in the motor and related industries. People credited with this unit standard are able to demonstrate good work habits in the workplace, safe working practices, and good housekeeping practices in the motor and related industries.
Standard-setting body:
Select and use hand tools and workshop equipment for an automotive application
Version 2 This unit standard and unit standard 21669 replaced unit standard 228 and unit standard 3880.
21859 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to select the appropriate hand tools and workshop equipment for the job, and maintain and use hand tools and workshop equipment for an automotive application.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Perform safe working practices in an automotive workshop
This standard has expired and is no longer available.
Version 10 This unit standard and unit standard 16098 have been replaced by unit standard 21858.
226 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people involved in any automotive workshop operation. People credited with this unit standard are able to: demonstrate safe working practices in an automotive workshop; demonstrate good housekeeping practices; and maintain safe working practices in an automotive workplace.
Standard-setting body:
Carry out general engineering tasks to repair and make automotive components
This standard has expired and is no longer available.
Version 10 This unit standard and unit standard 3879 have been replaced by unit standard 21670 and unit standard 21671.
227 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of materials commonly used in the automotive industry; assemble and secure components; mark out a component for manufacture; drill holes in materials; use hand threading tools to repair a component; and use a grinder.
Standard-setting body:
Select and use hand tools and workshop equipment for an automotive application
This standard has expired and is no longer available.
Version 10 This unit standard and unit standard 3880 have been replaced by unit standard 21669 and unit standard 21859.
228 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people entering the automotive repair industry or when initially employed to carry out tasks in any automotive application. People credited with this unit standard are able to select the appropriate tools and workshop equipment for the job, and maintain and use tools and workshop equipment.
Standard-setting body:
Repair and manufacture automotive components by oxy-acetylene gas welding
This standard has expired and is no longer available.
Version 10 This unit standard and unit standard 3885 have been replaced by unit standard 21682 and unit standard 21685.
230 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to assemble and light up an oxy-acetylene welding plant ready for use, and repair and manufacture mild steel components by oxy-acetylene gas welding.
Standard-setting body:
Heat metal automotive components to aid disassembly and assembly in the automotive industry
Version 3
24393 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to heat metal automotive components, and carry out the heating operation on metal automotive components to aid disassembly and assembly in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out general engineering tasks in the motor body industry
This standard has expired and is no longer available.
Version 9 This unit standard and unit standard 227 were replaced by unit standard 21671 and unit standard 21670.
3879 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are at pre- employment level or who have recently started work in the motor body industry. People credited with this unit standard are able to: demonstrate knowledge of metals commonly used in the motor body industry; assemble and secure components; drill holes in materials; use hand threading tools to repair a component; remove a broken stud; and use a grinder in the motor body industry.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Clean automotive components
Version 6
924 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to clean automotive components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of lawnmower types and applications, and lawnmower operation
This standard has expired and is no longer available.
Version 7
949 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of lawnmower types and applications, and lawnmower operation.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Sharpen and set reel type mower blades and cutting units
This standard has expired and is no longer available.
Version 4
15427 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to prepare the mower for blade sharpening and setting, and sharpen and set the bottom plate and reel assembly.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make and assemble mobile refrigeration and air conditioning system components under supervision
This standard has expired and is no longer available.
Version 3
19640 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able with supervision to interpret and act on drawings and specifications; work materials in the manufacture of components for mobile refrigeration and air conditioning systems; and fit parts together to form components for mobile refrigeration and air conditioning systems.
Standard-setting body:
Demonstrate knowledge of MIG welding in the motor industry
This standard has expired and is no longer available.
Version 3 This unit standard and unit standard 21682 were replaced by unit standard 30570. This unit standard and unit standard 21684 replaced unit standard 3884.
21683 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of MIG welding in the motor industry, and the MIG welding process.
Standard-setting body:
Use a MIG welding plant in the automotive industry
Version 3 This unit standard and unit standard 21683 replaced unit standard 3884.
21684 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to MIG weld metal pieces in the automotive industry, and shutdown and maintain a MIG welder.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of non-destructive testing of automotive components
This standard has expired and is no longer available.
Version 2
23809 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in the motor industry. People credited with this unit standard are able to demonstrate knowledge of non-destructive testing of automotive components.
Standard-setting body:
Carry out a non-destructive test to determine serviceability of automotive components
This standard has expired and is no longer available.
Version 2
23810 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in the motor industry. People credited with this unit standard are able to prepare to test automotive components by non-destructive testing methods, and complete a non-destructive test to determine serviceability of automotive components.
Standard-setting body:
Use a gas metal arc welding plant in the automotive and related industries
Version 3 This unit standard replaced unit standard 914 and unit standard 5771.
23992 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to use a gas metal arc welding (GMAW) plant in the automotive and related industries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manual metal arc weld automotive components
Version 2 This unit standard and unit standard 24373 replaced unit standard 950.
24372 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive engineering industry who are required to arc weld. People credited with this unit standard are able to: prepare to weld components; and manual metal arc weld automotive components on and off the vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of the manual metal arc welding process in the automotive industry
Version 2 This unit standard and unit standard 24372 replaced unit standard 950.
24373 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive industry. People credited with this unit standard are able to demonstrate knowledge of the manual metal arc welding process in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of welding in the motor industry
Version 1 This unit standard replaced unit standard 21682 and unit standard 21683.
30570 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of oxyacetylene welding (OAW), gas metal arc welding (GMAW), and gas tungsten arc welding (GTAW).
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Use the oxy-acetylene process for welding and allied uses in the motor industry
This standard has expired and is no longer available.
Version 6
913 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry who require skill in oxy-acetylene welding. People credited with this unit standard are able to: oxy-acetylene weld mild steel components in a fixed position on a vehicle or machine; bronze weld components using the oxy-acetylene flame; and join parts using low temperature brazing.
Standard-setting body:
Metal-arc gas shield (MIG) weld automotive components
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 5771 have been replaced by unit standard 23992.
914 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive service industries. People credited with this unit standard are able to: demonstrate knowledge of the metal-arc gas shielded (MIG) welding process; and weld automotive components on and off the vehicle using the MIG welding process.
Standard-setting body:
Manual metal arc weld automotive components in flat and vertical positions
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24372 and unit standard 24373.
950 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive engineering industry. People credited with this unit standard are able to: demonstrate knowledge of the manual metal arc welding process; and manual metal arc weld automotive components.
Standard-setting body:
Level 4
Inspect and repair driveshaft (propeller shaft) assemblies
This standard has expired and is no longer available.
Version 4
11722 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to inspect a driveshaft (propeller shaft) assembly for condition; and repair, balance, and modify driveshaft assemblies.
Standard-setting body:
Inspect and balance automotive components
This standard has expired and is no longer available.
Version 4
11724 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive machining industry. People credited with this unit standard are able to determine the feasibility of balancing automotive components, and balance automotive components.
Standard-setting body:
Repair ride-on rotary mowers
This standard has expired and is no longer available.
Version 5 This unit standard and unit standard 15431 have been replaced by unit standard 24390.
15426 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect ride-on domestic and commercial rotary mowers for condition, and repair and/or replace ride-on domestic and commercial rotary mower components.
Standard-setting body:
Service 230 volt electrically powered equipment for the outdoor power equipment industry
This standard has expired and is no longer available.
Version 5
15428 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect and test 230 volt electrically powered equipment for condition, and service 230 volt electrically powered equipment components.
Standard-setting body:
Diagnose and repair outdoor power equipment faults in the automotive industry
Version 4
15429 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair outdoor power equipment faults in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and repair walk behind reel mowers
This standard has expired and is no longer available.
Version 4 This unit standard replaced unit standard 19043 and unit standard 19049.
15430 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect walk behind reel mowers for condition, and repair and/or replace reel mower components.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair walk behind rotary mowers
This standard has expired and is no longer available.
Version 5 This unit standard and unit standard 15426 have been replaced by unit standard 24390.
15431 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect walk behind rotary mowers for condition, and repair and replace rotary mower components.
Standard-setting body:
Inspect and repair ground conditioning and turf equipment
This standard has expired and is no longer available.
Version 4
15432 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect ground conditioning and turf equipment for condition, and repair and/or replace ground conditioning and turf equipment components.
Standard-setting body:
Test and repair a battery powered machine
Version 4
15433 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical and outdoor power equipment repair industries. People credited with this unit standard are able to: test a battery powered machine for condition; and repair or replace battery powered machine components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Install refrigeration and air conditioning systems in vehicles under supervision
This standard has expired and is no longer available.
Version 3
19641 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able with supervision to: prepare for the installation of refrigeration and air conditioning systems in vehicles; install refrigeration and air conditioning system components to the vehicle; and charge the components of refrigeration and air conditioning systems with lubricants and secondary heat transfer liquids as required.
Standard-setting body:
Hardface automotive heavy equipment components using the manual electric arc welding process
This standard has expired and is no longer available.
Version 5
2310 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to hardface heavy equipment components using the manual electric arc welding process.
Standard-setting body:
Inspect and repair hand held outdoor power equipment
This standard has expired and is no longer available.
Version 4
2328 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect and repair: chainsaws, power cutters, and brush cutters and trimmers, and test for correct operation.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair winches and pulley block assemblies on heavy machinery or equipment
This standard has expired and is no longer available.
Version 4
2344 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: diagnose automotive heavy equipment winch faults; overhaul automotive heavy equipment winches; and rectify pulley block assembly faults.
Standard-setting body:
Store and arrange for the disposal of hazardous automotive waste materials in the motor and related industries
This standard has expired and is no longer available.
Version 2 This unit standard replaced unit standard 5763.
24083 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in the motor and related industries. People credited with this unit standard are able to store hazardous automotive waste materials ready for disposal, and arrange for the disposal of hazardous automotive waste materials.
Standard-setting body:
Demonstrate knowledge of hard facing automotive components
Version 2 This unit standard and unit standard 24375 replaced unit standard 2310 and unit standard 3395.
24374 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of hard facing automotive components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hard face automotive components using an electric or oxyacetylene welding process
Version 2 This unit standard and unit standard 24374 replaced unit standard 2310 and unit standard 3395.
24375 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to hard face automotive components using an electric or oxyacetylene welding process.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of hydraulic brake and clutch cylinder resleeving procedures
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24387 replaced unit standard 5432.
24376 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the brake engineering industry. People credited with this unit standard are able to demonstrate knowledge of hydraulic brake and clutch cylinder resleeving procedures.
Standard-setting body:
Resleeve a brake or clutch hydraulic cylinder
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24376 replaced unit standard 5432.
24387 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the brake engineering industry. People credited with this unit standard are able to: prepare brake or clutch hydraulic cylinders for resleeving; carry out the resleeving operation; and finish and test resleeved cylinder.
Standard-setting body:
Inspect and repair walk behind rotary mowers, ride-on mowers, and lawn tractors
This standard has expired and is no longer available.
Version 2 This unit standard replaced unit standard 15426 and unit standard 15431.
24390 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the outdoor power equipment repair industry. People credited with this unit standard are able to inspect walk behind rotary mowers, ride-on mowers, and lawn tractors for condition, and repair and/or replace rotary mower, ride-on mower, and lawn tractor components.
Standard-setting body:
Describe water blasters, low-pressure pumps, and diagnosing faults in the motor and related industries
Version 1
31896 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe water blasters and low-pressure water pumps; and fault diagnosis in water blasters and low-pressure pumps in the motor and related industries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in water blasters and low-pressure pumps in the motor and related industries
Version 1
31897 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in water blasters and low-pressure pumps in the motor and related industries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and repair damaged motorcycles
Version 4
3381 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to: inspect a damaged motorcycle; and repair the damage to a motorcycle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hard face automotive components using oxy-acetylene
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 2310 have been replaced by unit standard 24374 and unit standard 24375.
3395 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of oxy-acetylene hard facing applications, and hard face automotive components using oxy-acetylene.
Standard-setting body:
Describe hydraulic cylinder resleeving procedures and resleeve a brake and clutch cylinder
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 24376 and unit standard 24387.
5432 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the brake engineering industry. People credited with this unit standard are able to: demonstrate knowledge of hydraulic cylinder repair requirements; prepare hydraulic cylinders for resleeving; carry out the resleeving operation; and finish and test resleeved cylinder.
Standard-setting body:
Demonstrate knowledge of metals used on vehicles, and the effect of applying heat to metals
Version 6
5743 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of metals used on vehicles, and the effect of applying heat to metals.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Investigate an automotive mechanical or bodywork problem and supervise its rectification
Version 4
10102 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive engineering and related industries. People credited with this unit standard are able to: investigate a reported automotive mechanical or bodywork problem; determine the cause and solution to the problem; and supervise the rectification of the problem.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Monitor and control complex system fault repairs on a vehicle or machine
Version 1 This unit standard and unit 33132 replaced unit standard 10102.
33131 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to monitor and control complex system fault repairs on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair complex system faults on a vehicle or machine
Version 1 This unit standard and unit 33131 replaced unit standard 10102.
33132 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to repair complex system faults on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Undertake cause and effect analysis for heavy vehicle or machine component metal fatigue failure
Version 1
33133 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: analyse component failure caused by metal fatigue; and reflect on learning experience in response to analysing component failure caused by metal fatigue.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-04-23 23:01:10.73