- Home
- Qualifications and standards
- NCEA
- M?ori and Pasifika
-
Providers and partners
- About education organisations
- NZQA's quality assurance system for tertiary education organisations
- Guidelines and forms
- Quick links to NZQF documents
- Consistency of graduate outcomes
- Approval, accreditation and registration
- Monitoring and Assessment
- Self-assessment
- External evaluation and review
- Assessment and moderation of standards
- Submitting results and awarding qualifications and micro-credentials
- Interim domestic Code of Practice (current)
- International Code of Practice (current)
- Tertiary and International Learners Code of Practice
- Offshore use of qualifications and programmes
- Assessment and moderation
- registration-and-accreditation
- caring-for-international-students
- Reform of vocational education
- International Education planning
- international
- About us
Domain - Automotive Workshop Engineering
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Motor Industry > Automotive Workshop Engineering
0 Qualifications | 60 Assessment Standards (60 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
Level 2 | ||||||
11737 | Unit |
Demonstrate knowledge of exhaust shop equipment This standard has expired and is no longer available. |
4 Credits | |||
15425 | Unit |
Inspect and repair hand push mowers This standard has expired and is no longer available. |
1 Credits | |||
21671 | Unit |
Carry out general engineering tasks in the automotive industry |
4 Credits | |||
21682 | Unit |
Demonstrate knowledge of an oxy-acetylene welding plant in the motor industry This standard has expired and is no longer available. |
2 Credits | |||
21685 | Unit |
Use the oxyacetylene welding process in the automotive industry |
3 Credits | |||
21700 | Unit |
Store and use hazardous materials in the automotive and related industries |
2 Credits | |||
21715 | Unit |
Select and use fastening systems in the automotive industry |
2 Credits | |||
21718 | Unit |
Demonstrate knowledge of hazardous materials used in the automotive industry |
2 Credits | |||
21858 | Unit |
Demonstrate good work habits and perform safe work practices in the motor and related industries This standard has expired and is no longer available. |
4 Credits | |||
21859 | Unit |
Select and use hand tools and workshop equipment for an automotive application |
4 Credits | |||
226 | Unit |
Perform safe working practices in an automotive workshop This standard has expired and is no longer available. |
2 Credits | |||
227 | Unit |
Carry out general engineering tasks to repair and make automotive components This standard has expired and is no longer available. |
4 Credits | |||
228 | Unit |
Select and use hand tools and workshop equipment for an automotive application This standard has expired and is no longer available. |
5 Credits | |||
230 | Unit |
Repair and manufacture automotive components by oxy-acetylene gas welding This standard has expired and is no longer available. |
3 Credits | |||
24393 | Unit |
Heat metal automotive components to aid disassembly and assembly in the automotive industry |
2 Credits | |||
3879 | Unit |
Carry out general engineering tasks in the motor body industry This standard has expired and is no longer available. |
4 Credits | |||
924 | Unit |
Clean automotive components |
1 Credits | |||
949 | Unit |
Demonstrate knowledge of lawnmower types and applications, and lawnmower operation This standard has expired and is no longer available. |
3 Credits | |||
Level 3 | ||||||
15427 | Unit |
Sharpen and set reel type mower blades and cutting units This standard has expired and is no longer available. |
6 Credits | |||
19640 | Unit |
Make and assemble mobile refrigeration and air conditioning system components under supervision This standard has expired and is no longer available. |
5 Credits | |||
21683 | Unit |
Demonstrate knowledge of MIG welding in the motor industry This standard has expired and is no longer available. |
2 Credits | |||
21684 | Unit |
Use a MIG welding plant in the automotive industry |
3 Credits | |||
23809 | Unit |
Demonstrate knowledge of non-destructive testing of automotive components This standard has expired and is no longer available. |
2 Credits | |||
23810 | Unit |
Carry out a non-destructive test to determine serviceability of automotive components This standard has expired and is no longer available. |
2 Credits | |||
23992 | Unit |
Use a gas metal arc welding plant in the automotive and related industries |
3 Credits | |||
24372 | Unit |
Manual metal arc weld automotive components |
4 Credits | |||
24373 | Unit |
Demonstrate knowledge of the manual metal arc welding process in the automotive industry |
2 Credits | |||
30570 | Unit |
Demonstrate knowledge of welding in the motor industry |
3 Credits | |||
913 | Unit |
Use the oxy-acetylene process for welding and allied uses in the motor industry This standard has expired and is no longer available. |
4 Credits | |||
914 | Unit |
Metal-arc gas shield (MIG) weld automotive components This standard has expired and is no longer available. |
4 Credits | |||
950 | Unit |
Manual metal arc weld automotive components in flat and vertical positions This standard has expired and is no longer available. |
6 Credits | |||
Level 4 | ||||||
11722 | Unit |
Inspect and repair driveshaft (propeller shaft) assemblies This standard has expired and is no longer available. |
15 Credits | |||
11724 | Unit |
Inspect and balance automotive components This standard has expired and is no longer available. |
10 Credits | |||
15426 | Unit |
Repair ride-on rotary mowers This standard has expired and is no longer available. |
8 Credits | |||
15428 | Unit |
Service 230 volt electrically powered equipment for the outdoor power equipment industry This standard has expired and is no longer available. |
8 Credits | |||
15429 | Unit |
Diagnose and repair outdoor power equipment faults in the automotive industry |
20 Credits | |||
15430 | Unit |
Inspect and repair walk behind reel mowers This standard has expired and is no longer available. |
10 Credits | |||
15431 | Unit |
Repair walk behind rotary mowers This standard has expired and is no longer available. |
9 Credits | |||
15432 | Unit |
Inspect and repair ground conditioning and turf equipment This standard has expired and is no longer available. |
15 Credits | |||
15433 | Unit |
Test and repair a battery powered machine |
5 Credits | |||
19641 | Unit |
Install refrigeration and air conditioning systems in vehicles under supervision This standard has expired and is no longer available. |
20 Credits | |||
2310 | Unit |
Hardface automotive heavy equipment components using the manual electric arc welding process This standard has expired and is no longer available. |
2 Credits | |||
2328 | Unit |
Inspect and repair hand held outdoor power equipment This standard has expired and is no longer available. |
10 Credits | |||
2344 | Unit |
Diagnose and repair winches and pulley block assemblies on heavy machinery or equipment This standard has expired and is no longer available. |
2 Credits | |||
24083 | Unit |
Store and arrange for the disposal of hazardous automotive waste materials in the motor and related industries This standard has expired and is no longer available. |
3 Credits | |||
24374 | Unit |
Demonstrate knowledge of hard facing automotive components |
3 Credits | |||
24375 | Unit |
Hard face automotive components using an electric or oxyacetylene welding process |
2 Credits | |||
24376 | Unit |
Demonstrate knowledge of hydraulic brake and clutch cylinder resleeving procedures This standard has expired and is no longer available. |
1 Credits | |||
24387 | Unit |
Resleeve a brake or clutch hydraulic cylinder This standard has expired and is no longer available. |
4 Credits | |||
24390 | Unit |
Inspect and repair walk behind rotary mowers, ride-on mowers, and lawn tractors This standard has expired and is no longer available. |
9 Credits | |||
31896 | Unit |
Describe water blasters, low-pressure pumps, and diagnosing faults in the motor and related industries |
4 Credits | |||
31897 | Unit |
Diagnose and repair faults in water blasters and low-pressure pumps in the motor and related industries |
4 Credits | |||
3381 | Unit |
Inspect and repair damaged motorcycles |
6 Credits | |||
3395 | Unit |
Hard face automotive components using oxy-acetylene This standard has expired and is no longer available. |
2 Credits | |||
5432 | Unit |
Describe hydraulic cylinder resleeving procedures and resleeve a brake and clutch cylinder This standard has expired and is no longer available. |
5 Credits | |||
5743 | Unit |
Demonstrate knowledge of metals used on vehicles, and the effect of applying heat to metals |
6 Credits | |||
Level 5 | ||||||
10102 | Unit |
Investigate an automotive mechanical or bodywork problem and supervise its rectification |
4 Credits | |||
33131 | Unit |
Monitor and control complex system fault repairs on a vehicle or machine |
20 Credits | |||
33132 | Unit |
Repair complex system faults on a vehicle or machine |
20 Credits | |||
33133 | Unit |
Undertake cause and effect analysis for heavy vehicle or machine component metal fatigue failure |
10 Credits |