Domain - Timber Machining
TOP > Manufacturing > Solid Wood Manufacturing > Timber Machining
0 Qualifications | 19 Assessment Standards (19 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Perform basic calculations for the operation of wood forming machines and grinders
Version 3
17960 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to perform basic calculations required: in the operation of a wood forming machine, and a grinder used in a wood forming operation.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make straight cutters
Version 6
690 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with making straight cutters; prepare to cut and grind straight cutters; cut and grind straight cutters; hone and balance straight cutters; and store straight cutters.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Inspect and maintain a wood forming machine
Version 5
15775 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with inspecting and maintaining a wood forming machine; dismantle and clean a wood forming machine; inspect and replace wood forming machine components; assemble and test a wood forming machine; and check and align a wood forming machine.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Operate a planing system in wood manufacturing
Version 2
22989 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage safety and hazards when operating and monitoring a planing system; demonstrate knowledge of the operation and operating principles of a planing system; prepare to operate a planing system; operate a planing system; and monitor a planing system.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up a timber planer for dress four sides
Version 5
675 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of factors affecting the finished quality of machined timber; manage hazards associated with setting up a planer for dress four sides; clean and strip a dress four sides planer; explain the sequence of setting up a planer for dress four sides; select and fit preset cutterheads for dress four sides; complete set-up, make adjustments and calculations for dress four sides; and check planer set-up for dress four sides.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Feed and tail out a planer, and monitor planer performance
Version 6
678 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage safety and hazards when feeding and tailing out a planer; demonstrate knowledge of the operation and operating principles of a planer; feed timber into a planer; out-feed planed timber; monitor planer performance; and record downtime, and report machinery breakages. This unit standard includes the feeding of sawn or planed timber (feedstock) into a planing machine, and the out-feeding of planed timber.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Joint straight cutters
Version 6
681 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with joint straight cutters, prepare and set up jointer; and joint cutters and adjust cutterhead.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Joint profile cutters
Version 6
682 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with joint profile cutters; prepare and set up jointer; and joint profile cutters and adjust cutterhead.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Grind and hone straight cutters
Version 6
684 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with grinding and honing straight cutters; clean and match cutters; prepare grinder; mount cutters and adjust grinder; grind and hone cutters; balance cutters; and store cutters.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Grind and hone straight cutters in-head
This standard has expired and is no longer available.
Version 6
685 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with grinding and honing straight cutters in-head; clean cutterhead; prepare grinder; mount and adjust cutterhead in grinder; grind and hone cutters in-head; and store cutterhead.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set cutters into cutterheads
Version 6
689 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with setting cutters into cutterheads; strip and clean cutterhead; select cutters; and fit and balance cutters. The removal of the cutterhead from the planer is not part of this unit standard.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Apply calculations for operating and maintaining wood forming machines
Version 4
17959 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to apply calculations to: obtain cutter balancing; determine and maintain the grinding wheel cutting speed; determine changes in pulley sizes required; determine pneumatic pressure required for wood forming machine components; and determine wood forming machine efficiency.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify, diagnose and rectify machined product defects
Version 4
19719 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify the causes of, diagnose and rectify machined product defects.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Develop profile, and grind and hone profile cutters in-head
Version 3
23105 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: determine developed profile shape; manage hazards associated with grinding and honing profile cutters in-head; clean cutterhead; prepare grinder; mount and adjust cutterhead and template; grind and hone cutters; and store cutterhead.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set up timber planer for profile
Version 6
676 Unit Standard 30 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with setting up a timber planer for profile; clean and strip a profile planer; select and fit preset cutterheads; complete set-up and make adjustments and calculations for profile; and check planer set-up for profile.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make profile cutter templates
Version 7
688 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: draw profiles; and make profile cutter templates. This unit standard does not cover the making of cutters or the development of templates.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Explain and calculate costing of timber machining operations
Version 4
8009 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to explain costing components of operations and calculate the cost of manufacturing a timber-machined product.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Set cutterhead spindle positions using data from a calibrated measuring device
Version 5
8010 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: manage hazards associated with setting machines which have calibrated measuring and setting systems; align and calibrate measuring and timber planing systems; and set spindle adjustment positions.
Consent & Moderation Requirements:
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Manage planer operations, and tooling and profile systems
This standard has expired and is no longer available.
Version 4
15772 Unit Standard 35 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: control hazards associated with managing tooling and profile systems; verify customer requirements for tooling and profiles; manage preparation of profile and tooling; troubleshoot tooling and profile design, manage planer operations, and manage storage systems for profile and tooling.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2025-05-01 23:01:07.45