- Home
- Qualifications and standards
- NCEA
- M?ori and Pasifika
-
Providers and partners
- About education organisations
- NZQA's quality assurance system for tertiary education organisations
- Guidelines and forms
- Quick links to NZQF documents
- Consistency of graduate outcomes
- Approval, accreditation and registration
- Monitoring and Assessment
- Self-assessment
- External evaluation and review
- Assessment and moderation of standards
- Submitting results and awarding qualifications and micro-credentials
- Interim domestic Code of Practice (current)
- International Code of Practice (current)
- Tertiary and International Learners Code of Practice
- Offshore use of qualifications and programmes
- Assessment and moderation
- registration-and-accreditation
- caring-for-international-students
- Reform of vocational education
- International Education planning
- international
- About us
Domain - Engineering - Fabrication
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Mechanical Engineering > Engineering - Fabrication
| 0 Qualifications | 50 Assessment Standards (50 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
| Level 2 | ||||||
| 16954 | Unit |
Calculate lengths, areas and mass of engineering fabrication materials This standard has expired and is no longer available. |
4 Credits | |||
| 2414 | Unit |
Lay out and mark off regular fabrication shapes under supervision |
15 Credits |
|
||
| 2415 | Unit |
Form and shape fabrication materials under supervision This standard has expired and is no longer available. |
10 Credits | |||
| 2416 | Unit |
Assemble and mechanically join plate and sheet under supervision |
10 Credits |
|
||
| 2417 | Unit |
Mechanically cut fabrication materials under supervision |
8 Credits |
|
||
| 25075 | Unit |
Perform basic fabrication operations under supervision This standard has expired and is no longer available. |
12 Credits | |||
| 29670 | Unit |
Demonstrate knowledge of fabrication machinery, materials, and processes |
3 Credits |
|
||
| 29730 | Unit |
Apply good work practices when performing basic fabrication operations under supervision |
6 Credits |
|
||
| 30473 | Unit |
Demonstrate and apply knowledge of computerised manufacturing for engineering fabrication |
4 Credits |
|
||
| Level 3 | ||||||
| 16955 | Unit |
Calculate sizes, mass, volumes, and quantities for fabrication This standard has expired and is no longer available. |
4 Credits | |||
| 2418 | Unit |
Lay out and mark off irregular fabrication shapes under supervision This standard has expired and is no longer available. |
15 Credits | |||
| 2419 | Unit |
Form and shape sheet, plate, pipe and structural sections using power machines under supervision This standard has expired and is no longer available. |
15 Credits | |||
| 2420 | Unit |
Assemble and mechanically join tube, pipe and sections under supervision This standard has expired and is no longer available. |
15 Credits | |||
| 2421 | Unit |
Mechanically cut fabrication materials using powered machinery under supervision This standard has expired and is no longer available. |
10 Credits | |||
| 25704 | Unit |
Develop fabrication patterns manually for simple three-dimensional objects |
5 Credits |
|
||
| 25706 | Unit |
Demonstrate and apply knowledge of intermediate light fabrication trade practice |
10 Credits |
|
||
| 25707 | Unit |
Demonstrate and apply knowledge of intermediate heavy fabrication trade practice |
10 Credits |
|
||
| 25711 | Unit |
Demonstrate knowledge of basic CNC concepts and applications in the fabrication industry This standard has expired and is no longer available. |
4 Credits | |||
| 30263 | Unit |
Perform fabrication operations |
10 Credits |
|
||
| 30274 | Unit |
Cut fabrication materials using hand held power tools |
5 Credits |
|
||
| 30440 | Unit |
Mark out fabrication components using geometrical methods |
5 Credits |
|
||
| 30474 | Unit |
Set up and operate a CNC machine for engineering fabrication |
3 Credits |
|
||
| Level 4 | ||||||
| 16956 | Unit |
Demonstrate knowledge of force and stress in fabrications This standard has expired and is no longer available. |
4 Credits | |||
| 18107 | Unit |
Lay out and mark off complex heavy fabrication shapes This standard has expired and is no longer available. |
15 Credits | |||
| 2422 | Unit |
Lay out and mark off complex fabrication shapes This standard has expired and is no longer available. |
15 Credits | |||
| 2423 | Unit |
Form and shape fabrication materials This standard has expired and is no longer available. |
15 Credits | |||
| 2424 | Unit |
Assemble and mechanically join sheet, plate, tube, pipe and structural sections This standard has expired and is no longer available. |
20 Credits | |||
| 2425 | Unit |
Mechanically cut sheet, plate, tube, pipe and structural sections This standard has expired and is no longer available. |
10 Credits | |||
| 25698 | Unit |
Form light fabrication materials |
20 Credits |
|
||
| 25699 | Unit |
Form heavy fabrication materials |
20 Credits |
|
||
| 25700 | Unit |
Assemble and join light fabrication materials |
20 Credits |
|
||
| 25701 | Unit |
Assemble and join heavy fabrication materials |
20 Credits |
|
||
| 25702 | Unit |
Cut light fabrication materials This standard has expired and is no longer available. |
15 Credits | |||
| 25703 | Unit |
Cut heavy fabrication materials This standard has expired and is no longer available. |
15 Credits | |||
| 25705 | Unit |
Develop fabrication patterns manually for complex three-dimensional objects |
10 Credits |
|
||
| 25708 | Unit |
Demonstrate and apply knowledge of advanced light fabrication trade practice |
12 Credits |
|
||
| 25709 | Unit |
Demonstrate and apply knowledge of advanced heavy fabrication trade practice |
12 Credits |
|
||
| 25710 | Unit |
Make up jigs and fixtures for use in engineering fabrication |
5 Credits |
|
||
| 25712 | Unit |
Demonstrate knowledge of pressure vessels and pressure piping for fabrication trades |
4 Credits |
|
||
| 25713 | Unit |
Demonstrate knowledge of steel construction site and worksite operations, procedures and processes |
4 Credits |
|
||
| 25874 | Unit |
Lay out and mark off light fabrication shapes This standard has expired and is no longer available. |
15 Credits | |||
| 25875 | Unit |
Lay out and mark off heavy fabrication shapes This standard has expired and is no longer available. |
15 Credits | |||
| 30272 | Unit |
Cut fabrication materials using machines |
10 Credits |
|
||
| 31143 | Unit |
Install steel construction structures |
10 Credits |
|
||
| Level 5 | ||||||
| 16957 | Unit |
Apply knowledge of force and stress in engineering fabrications |
6 Credits |
|
||
| 2426 | Unit |
Supervise the laying out and marking off of fabrication shapes This standard has expired and is no longer available. |
18 Credits | |||
| 2427 | Unit |
Supervise the forming and shaping of fabrication materials This standard has expired and is no longer available. |
20 Credits | |||
| 2428 | Unit |
Supervise assembly and mechanical joining of fabricated parts This standard has expired and is no longer available. |
20 Credits | |||
| 2429 | Unit |
Supervise fabrication mechanical cutting operations This standard has expired and is no longer available. |
15 Credits | |||
| 26418 | Unit |
Supervise engineering fabrication operations |
30 Credits |
|
||