Domain - Automotive Fuel Systems and Exhaust
TOP > Engineering and Technology > Motor Industry > Automotive Fuel Systems and Exhaust
| 0 Qualifications | 154 Assessment Standards (154 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Select, make, and fit exhaust brackets and mounts
This standard has expired and is no longer available.
Version 4
11735 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the exhaust repair industry. People credited with this unit standard are able to: determine exhaust mounting requirements; select exhaust mountings for a particular application; and make and fit exhaust brackets and mounts.
Standard-setting body:
Replace exhaust system components
This standard has expired and is no longer available.
Version 5 This unit standard, unit standard 933 and unit standard 5754 were replaced by unit standard 21678.
11738 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: select exhaust components for the job; remove and inspect existing exhaust system; and replace existing exhaust system.
Standard-setting body:
Remove and refit a turbocharger to an engine
This standard has expired and is no longer available.
Version 4
15382 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to remove a turbocharger from an engine, and refit a turbocharger to an engine.
Standard-setting body:
Demonstrate knowledge of a diesel fuel system
This standard has expired and is no longer available.
Version 3 This unit standard and unit standard 21692 replaced unit standard 241. This unit standard was replaced by unit standard 30437.
21677 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of diesel oil as an automotive fuel, and a diesel fuel system.
Standard-setting body:
Perform minor servicing tasks on a diesel fuel system
Version 2 This unit standard and unit standard 21677 replaced unit standard 241.
21692 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to remove and replace diesel fuel injectors, remove and replace a fuel filter, and bleed air from a diesel fuel system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe the operation of a diesel fuel system and perform minor servicing tasks
This standard has expired and is no longer available.
Version 10 This unit standard has been replaced by unit standard 21677 and unit standard 21692.
241 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of diesel oil as an automotive fuel; demonstrate knowledge of a diesel fuel system; remove and replace diesel fuel injectors; remove and replace a fuel filter; and bleed air from a diesel fuel system.
Standard-setting body:
Perform minor servicing tasks on a petrol fuel system
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 29372.
24234 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard able to: check fuel system for leaks and blockage; remove and replace a fuel filter; remove and replace injectors on an electronic fuel injection (EFI) system; remove and replace a fuel pump; and check engine exhaust emissions.
Standard-setting body:
Perform minor servicing tasks on a petrol fuel system
Version 2 This unit standard replaced unit standard 24234.
29372 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to; check fuel system for leaks and blockage and rectify faults; remove and replace a fuel element or filter; and remove and replace injectors on an electronic fuel injection (EFI) system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate knowledge of vehicle exhaust systems
Version 5
11733 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of exhaust material handling and safety requirements, vehicle safety and legislative requirements relating to exhaust systems, exhaust mufflers and resonators, exhaust emission systems, and describe exhaust mounting, flexible joints, and sealing methods.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of carburettors used on outdoor powered equipment
Version 4
15380 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the outdoor power equipment repair industry. People credited with this unit standard are able to demonstrate knowledge of: carburettor operation used on outdoor powered equipment; basic carburettor service checks; and carburettor fault diagnosis and repair procedures.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose faults in diesel fuel injectors on an engine, and remove and replace injectors
This standard has expired and is no longer available.
Version 4
15402 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to diagnose and record faults in pintle and multi-hole type diesel fuel injectors, and remove and replace diesel fuel injectors.
Standard-setting body:
Test and diagnose diesel fuel injection systems, and repair fuel delivery systems
This standard has expired and is no longer available.
Version 3 This unit standard was replaced by unit standard 31391.
15403 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: diagnose engine fuel delivery system faults and their causes; diagnose fuel injection and control system faults and their causes; and inspect and repair fuel delivery systems.
Standard-setting body:
Demonstrate knowledge of diesel engine air intake and exhaust systems, and inspect and test them
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 930 have been replaced by unit standard 24178, unit standard 24179, and unit standard 24180. This unit standard and unit standard 15403 replaced unit standard 903.
15404 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of an induction system on a diesel engine; demonstrate knowledge of an exhaust system on a diesel engine; demonstrate knowledge of the operating conditions for a vehicle and/or machine equipped with a turbocharged engine; inspect and test the induction system on a diesel engine for faults; and inspect and test the exhaust system on a diesel engine for faults.
Standard-setting body:
Demonstrate knowledge of unit type diesel fuel injectors
Version 3
19303 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of unit type fuel injector construction and operation, and unit type diesel fuel injector service procedures.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove, repair, and/or replace a vehicle and/or machine exhaust system
This standard has expired and is no longer available.
Version 3 This unit standard replaced unit standard 933, unit standard 5754, and unit standard 11738. This unit standard was replaced by unit standard 30515.
21678 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to select exhaust components for the job, remove and inspect existing exhaust system, and repair and/or replace exhaust system.
Standard-setting body:
Demonstrate knowledge of fuel systems and fuel system requirements for a competition race vehicle
Version 2
23805 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of fuel systems used in a competition race vehicle, and fuel system requirements for a competition race vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of petrol fuel systems
This standard has expired and is no longer available.
Version 10 This unit standard and unit standard 5459 were replaced by unit standard 30436.
240 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of petrol as an automotive fuel, petrol combustion processes, and an electronic fuel injection (EFI) system.
Standard-setting body:
Demonstrate knowledge of exhaust systems of heavy vehicles and equipment
Version 2 This unit standard, unit standard 24179, and unit standard 24180, replaced unit standard 930 and unit standard 15404.
24178 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people who work on heavy vehicles and equipment. People credited with this unit standard are able to demonstrate knowledge of exhaust systems of heavy vehicles and equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of a forced air intake system on an engine
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by 30559. This unit standard, unit standard 24178, and unit standard 24180 replaced unit standard 930 and unit standard 15404.
24179 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: a forced air induction system on an engine; the operating conditions for a vehicle or machine equipped with a turbocharged engine; and servicing requirements for turbocharger systems.
Standard-setting body:
Inspect and test diesel engine induction and exhaust systems
Version 2 This unit standard, unit standard 24178, and unit standard 24179 replaced unit standard 930 and unit standard 15404.
24180 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to inspect and test the induction system on a diesel engine for faults and inspect and test the exhaust system on a diesel engine for faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of motorcycle carburettors, and diagnosing fuel system faults and their causes
Version 2 This unit standard and unit standard 24190 replaced unit standard 962.
24189 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of motorcycle carburettors and diagnosing fuel system faults and their causes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair heavy vehicle or machine exhaust systems
Version 2 This unit standard and unit standard 24191 replaced unit standard 3394.
24192 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive heavy repair industry. People credited with this unit standard are able to repair a faulty exhaust system on a heavy vehicle or machine and repair a noisy exhaust system on a heavy vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair and/or replace a motorcycle or all-terrain vehicle (ATV) exhaust system
This standard has expired and is no longer available.
Version 2
24236 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: select replacements for a motorcycle or ATV exhaust system; remove and inspect the existing motorcycle or ATV exhaust system; and repair and/or replace the exhaust system.
Standard-setting body:
Demonstrate knowledge of the operation and testing of vehicle diesel emission controls
This standard has expired and is no longer available.
Version 2
24237 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the vehicle repair industry. People credited with this unit standard are able to demonstrate knowledge of: diesel emissions; diesel emission standards and testing requirements; and diesel engine emission control system technology.
Standard-setting body:
Demonstrate knowledge of vehicle emissions
Version 1 This unit standard replaced unit standard 5461.
30435 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are currently employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of: vehicle emissions; and vehicle emission control systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of an electronic fuel injection (EFI) system
Version 1 This unit standard replaced unit standard 240 and unit standard 5459.
30436 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are currently employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of: petrol as an automotive fuel; petrol combustion; and EFI operation.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the operation of a diesel fuel system
Version 1 This unit standard replaced unit standard 21677.
30437 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are currently employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of: diesel as an automotive fuel; and diesel fuel system operation.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and refit intake and exhaust system components
Version 1 This unit standard replaced unit standard 21678.
30515 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to remove and refit or replace intake and exhaust system components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of induction and exhaust systems
Version 1 This unit standard replaced unit standard 24179.
30559 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of induction and exhaust systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of diagnosing automotive emission control system faults
Version 1
31057 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of diagnosing automotive emission control system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of carburettor operation
Version 1
31194 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of carburettor operation.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive liquefied petroleum gas (LPG) and liquefied natural gas (LNG) fuel systems
Version 1
31271 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of automotive liquefied petroleum gas (LPG) and liquefied natural gas (LNG) fuel systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair heavy vehicle and/or machine exhaust systems
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24191 and unit standard 24192.
3394 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: repair a faulty exhaust system on a heavy vehicle and/or machine; repair a noisy exhaust system on a heavy vehicle and/or machine; and demonstrate knowledge of making up exhaust systems to suit heavy vehicle and/or machine applications.
Standard-setting body:
Demonstrate knowledge of automotive electronic fuel injection system operation, and fault diagnosis and repair
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 240 were replaced by unit standard 30436.
5459 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of fuel injection system operation, and electronic fuel system fault diagnosis and repair.
Standard-setting body:
Demonstrate knowledge of fuel emissions, and vehicle emission controls
This standard has expired and is no longer available.
Version 4 This unit standard was replaced by unit standard 30435.
5461 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of fuel emissions, and vehicle emission control systems and their components.
Standard-setting body:
Demonstrate knowledge of the operation, service checks, fault diagnosis, and repair of carburettors
Version 5
8183 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: carburettor operation; basic carburettor service checks; and carburettor fault diagnosis and repair procedures.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and replace a diesel fuel injection pump
Version 5
917 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to remove and replace a diesel fuel injection pump.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe turbocharger operation, and service a turbocharger system on a vehicle or machine
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 15404 have been replaced by unit standard 24178, unit standard 24179, and unit standard 24180.
930 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of turbocharger operation; identify operating conditions for a vehicle and/or machine equipped with a turbocharged engine; and service the turbocharger system on a vehicle and/or machine.
Standard-setting body:
Diagnose and rectify exhaust system faults
This standard has expired and is no longer available.
Version 6
933 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to repair a leaking exhaust system, and repair a noisy exhaust system.
Standard-setting body:
Level 4
Determine requirements and make an exhaust muffler to a sample or drawing
This standard has expired and is no longer available.
Version 4
11732 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the exhaust repair or manufacturing industry. People credited with this unit standard are able to determine customer requirements, and make an exhaust muffler to a sample or drawing.
Standard-setting body:
Copy, make, and fit an exhaust tube to a vehicle or machine
This standard has expired and is no longer available.
Version 4
11736 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the exhaust repair and manufacturing industry. People credited with this unit standard are able to: make a pattern for the intended exhaust system; select material and equipment for the job; use bending plant to make up exhaust tube; and fit made-up exhaust tube to a vehicle or machine.
Standard-setting body:
Install and commission domestic LPG systems and appliances in caravans and/or boats
This standard has expired and is no longer available.
Version 3
11740 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive and marine repair industry. People credited with this unit standard are able to: demonstrate knowledge of the use of LPG (liquefied petroleum gas) in caravans and boats; prepare caravan and/or boat for LPG installation; install LPG for domestic purposes in a caravan and/or boat; and commission the installation.
Standard-setting body:
Diagnose and rectify faults in carburetted petrol fuel systems used on outdoor powered equipment
Version 4
15381 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the outdoor power equipment repair industry. People credited with this unit standard are able to diagnose carburetted petrol fuel system faults on outdoor powered equipment and rectify petrol fuel system faults and their causes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of electronic diesel management
This standard has expired and is no longer available.
Version 4 This unit standard was replaced by unit standard 31058.
15384 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of electronic diesel management systems, and electronic diesel engine management component testing procedures.
Standard-setting body:
Demonstrate knowledge of Simms Minimec diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24200 and unit standard 24201. This unit standard replaced unit standard 5430.
15385 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of Simms Minimec pump operation and repair procedures; dismantle a Simms Minimec pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a Minimec fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of DPA type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24202 and unit standard 24203. This unit standard replaced unit standard 5445.
15386 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of DPA fuel pump operation and repair procedures; dismantle a DPA pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a DPA fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of DPS type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24204 and unit standard 24205.
15387 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of DPS type fuel pump operation and repair procedures; dismantle a DPS type pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a DPS type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of P type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24206 and unit standard 24207. This unit standard replaced unit standard 5447.
15388 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of P type fuel pump operation and repair procedures; dismantle a P type pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a P type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of A type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24208 and unit standard 24209. This unit standard replaced unit standard 5448.
15389 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of A type fuel pump operation and repair procedures; dismantle an A type pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test an A type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of VE type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24210 and unit standard 24211. This unit standard replaced unit standard 5455.
15390 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge VE type fuel pump operation and repair procedures; dismantle a VE type pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a VE type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of RSV type diesel governors, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24212 and unit standard 24213.
15391 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of RSV type fuel governor operation and repair procedures; dismantle an RSV type governor and complete an inspection report; renew and replace governor components and reassemble governor; and bench test an RSV type fuel governor attached to a pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of RQ and RQV type diesel governors, and overhaul either of them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24214 and unit standard 24215.
15392 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of RQ type and RQV type fuel governor operations and their repair procedures; dismantle RQ and/or RQV type governors and complete inspection reports; renew and replace governor components and reassemble governor; and bench test RQ and/or RQV type fuel governors attached to pump assemblies and adjust their settings.
Standard-setting body:
Demonstrate knowledge of RAD and RFD type diesel governors, and overhaul either of them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24216 and unit standard 24217.
15393 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of RAD type and RFD type fuel governor operations and their repair procedures; dismantle RAD and/or RFD type governors and complete inspection reports; renew and replace governor components and reassemble governor; and bench test RAD and/or RFD type fuel governors attached to pump assemblies and adjust their settings.
Standard-setting body:
Demonstrate knowledge of R801 and R901 type diesel governors, and overhaul either of them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24218 and unit standard 24219.
15394 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of R801 type and R901 type fuel governor operations and their repair procedures; dismantle R801 and/or R901 type governors and complete inspection reports; renew and replace governor components and reassemble governor; and bench test R801 and/or R901 type fuel governors attached to pump assemblies and adjust their settings.
Standard-setting body:
Demonstrate knowledge of RLD type diesel governors, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24220 and unit standard 24221.
15395 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of RLD type fuel governor operation and repair procedures; dismantle an RLD type governor and complete an inspection report; renew and replace governor components and reassemble governor; and bench test an RLD type fuel governor attached to a pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of VE diesel injection pump additional devices, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24222 and unit standard 24223.
15396 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of VE additional devices; dismantle VE additional devices and complete an inspection report; renew and replace VE additional devices and reassemble pump; and test and reset the VE additional devices.
Standard-setting body:
Repair two-spring type diesel fuel injectors
This standard has expired and is no longer available.
Version 4
15397 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to dismantle two-spring type fuel injectors, and reassemble two-spring type fuel injectors.
Standard-setting body:
Demonstrate knowledge of Stanadyne diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24224 and unit standard 24225. This unit standard replaced unit standard 5446.
15398 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of Stanadyne fuel pump operation and repair procedures; dismantle a Stanadyne pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a Stanadyne fuel injection pump assembly and adjust settings.
Standard-setting body:
Describe Caterpillar diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24226 and unit standard 24227. This unit standard replaced unit standard 5449.
15399 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of Caterpillar fuel pump operation and repair procedures; dismantle a Caterpillar pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a Caterpillar fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of DPC type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24228 and unit standard 24229.
15400 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of DPC type fuel pump operation and repair procedures; dismantle a DPC type pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test a DPC type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of EP9 type diesel fuel injection pumps, and overhaul them
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24230 and unit standard 24231.
15401 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of EP9 type fuel pump operation and repair procedures; dismantle an EP9 type pump and complete an inspection report; renew and replace pump components and reassemble pump; and bench test an EP9 type fuel injection pump assembly and adjust settings.
Standard-setting body:
Repair diesel engine air intake and exhaust systems
Version 3
15405 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: inspect an induction system on a diesel engine and repair faults; inspect an exhaust system on a diesel engine and repair a faulty or noisy system; and service the turbocharger on a diesel engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of diesel fuel injectors, and repair them
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 5452 have been replaced by unit standard 24195, unit standard 24196, and unit standard 24197. This unit standard replaces unit standard 5444 and unit standard 5453.
19302 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of diesel fuel injectors and repair diesel fuel injectors.
Standard-setting body:
Describe turbocharger diagnostic procedures and recondition an automotive turbocharger
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 24232 and unit standard 24233. This unit standard replaces unit standard 15383.
19304 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: describe turbocharger diagnostic procedures; prepare a turbocharger for reconditioning; dismantle a turbocharger and complete a condition report; and renew and replace turbocharger components and assemble unit.
Standard-setting body:
Test electronic fuel management systems and replace components
Version 3
19305 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to identify test procedures and test electronic fuel management systems and replace fuel management system components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of engine tuning procedures and equipment malfunction causes on LPG fuelled vehicles
Version 2 This unit standard and unit standard 24182 replaced unit standard 951.
24181 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of tuning procedures and equipment malfunction causes on liquefied petroleum gas (LPG) fuelled vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in an automotive liquefied petroleum gas (LPG) fuel system
Version 2
24182 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: service an LPG fuel system and diagnose and repair LPG fuel system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of engine tuning procedures and equipment malfunction causes on CNG fuelled vehicles
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24184 replaced unit standard 952.
24183 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in automotive and related industries. People credited with this unit standard are able to demonstrate knowledge of engine tuning procedures and equipment malfunction causes on compressed natural gas (CNG) fuelled vehicles.
Standard-setting body:
Diagnose and rectify faults in a compressed natural gas (CNG) vehicle fuel system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24183 replaced unit standard 952.
24184 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in automotive and related industries. People credited with this unit standard are able to: carry out regular maintenance procedures on a CNG fuel system; test a CNG fuel system for faults; and rectify CNG fuel system faults and their causes.
Standard-setting body:
Demonstrate knowledge of liquefied petroleum gas vehicle fuel systems
Version 2 This unit standard and unit standard 24186 replaced unit standard 953.
24185 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive and related industries. People credited with this unit standard are able to demonstrate knowledge of liquified petroleum gas (LPG) as a gaseous fuel and the associated safety practices and regulations, and the operation of an LPG fuel system and conversion requirements.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Install a liquefied petroleum gas (LPG) vehicle fuel system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24185 replaced unit standard 953.
24186 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in automotive and related industries. People credited with this unit standard are able to prepare to install an LPG fuel system on a vehicle, and install an LPG fuel system on a vehicle.
Standard-setting body:
Demonstrate knowledge of compressed natural gas (CNG) vehicle fuel systems
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24188 replaced unit standard 954.
24187 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive engineering industry. People credited with this unit standard are able to demonstrate knowledge of CNG as a gaseous fuel and the associated safety practices and regulations, and the operation of a CNG fuel system and conversion requirements.
Standard-setting body:
Install a compressed natural gas (CNG) vehicle fuel system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24187 replaced unit standard 954.
24188 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive engineering industry. People credited with this unit standard are able to prepare to install a CNG fuel system on a vehicle, and install a CNG fuel system on a vehicle.
Standard-setting body:
Diagnose and rectify faults in a carburetted motorcycle fuel system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24189 replaced unit standard 962.
24190 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: diagnose carburetted fuel system faults and their causes; diagnose and rectify air intake system faults; and rectify carburetted fuel system faults and their causes on motorcycles.
Standard-setting body:
Demonstrate knowledge of fabricating, assembling and fitting exhaust systems in the motor and related industries
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24192 replaced unit standard 3394.
24191 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of fabricating exhaust systems, and assembling components and fitting exhaust systems.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of Cummins PT diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24194 replaced unit standard 5451.
24193 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of Cummins PT diesel fuel injection pumps.
Standard-setting body:
Diagnose faults and overhaul a Cummins PT diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24193 replaced unit standard 5451.
24194 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle a Cummins PT fuel injection pump and complete an inspection report; renew and replace Cummins PT fuel injection pump components and reassemble pump; and bench test a Cummins PT fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of diesel fuel injectors
Version 3 This unit standard, unit standard 24196, and unit standard 24197 replaced unit standard 5452 and unit standard 19302.
24195 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of diesel fuel injectors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair diesel fuel injectors
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 24195, and unit standard 24197 replaced unit standard 5452 and unit standard 19302.
24196 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the fuel injection industry. People credited with this unit standard are able to repair diesel fuel injectors.
Standard-setting body:
Overhaul Cummins diesel fuel injectors
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 24195, and unit standard 24196 replaced unit standard 5452 and unit standard 19302.
24197 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to overhaul Cummins diesel fuel injectors.
Standard-setting body:
Demonstrate knowledge of Simms Minimec diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24201 replaced unit standard 15385.
24200 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of Simms Minimec diesel fuel injection pumps.
Standard-setting body:
Overhaul a Simms Minimec diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24200 replaced unit standard 15385.
24201 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle a Simms Minimec fuel injection pump and complete an inspection report; renew and replace Simms Minimec fuel injection pump components and reassemble pump; and bench test a Simms Minimec fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of DPA-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24203 replaced unit standard 15386.
24202 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of DPA-type diesel fuel injection pumps.
Standard-setting body:
Overhaul a DPA-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24202 replaced unit standard 15386.
24203 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: dismantle a DPA-type fuel injection pump and complete an inspection report; renew and replace DPA-type fuel injection pump components and reassemble pump; and bench test a DPA-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of DPS-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24205 replaced unit standard 15387.
24204 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of DPS-type diesel fuel injection pumps.
Standard-setting body:
Overhaul a DPS-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24204 replaced unit standard 15387.
24205 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle a DPS-type fuel injection pump and complete an inspection report; renew and replace DPS-type fuel injection pump components and reassemble pump; and bench test a DPS-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of P-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24207 replaced unit standard 15388.
24206 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of P-type diesel fuel injection pumps.
Standard-setting body:
Overhaul a P-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24206 replaced unit standard 15388.
24207 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: dismantle a P-type fuel injection pump and complete an inspection report; renew and replace P-type fuel injection pump components and reassemble pump; and bench test a P-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of A-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24209 replaced unit standard 15389.
24208 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of A-type diesel fuel injection pumps.
Standard-setting body:
Overhaul an A-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24208 replaced unit standard 15389.
24209 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: dismantle an A-type fuel injection pump and complete an inspection report; renew and replace A-type fuel injection pump components and reassemble pump; and bench test an A-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of VE-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24211 replaced unit standard 15390.
24210 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of VE-type diesel fuel injection pumps.
Standard-setting body:
Overhaul a VE-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24210 replaced unit standard 15390.
24211 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: dismantle a VE-type fuel injection pump and complete an inspection report; renew and replace VE-type fuel injection pump components and reassemble pump; and bench test a VE-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of RSV-type diesel governors
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24213 replaced unit standard 15391.
24212 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of RSV-type diesel governors.
Standard-setting body:
Overhaul a RSV-type diesel fuel governor
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24212 replaced unit standard 15391.
24213 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: dismantle an RSV-type fuel governor and complete an inspection report; renew and replace RSV-type fuel governor components and reassemble governor; and bench test an RSV-type fuel governor attached to a pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of RQ-type and RQV-type diesel governors
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24215 replaced unit standard 15392.
24214 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of RQ-type and RQV-type diesel governors.
Standard-setting body:
Overhaul an RQ-type or RQV-type diesel fuel governor
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24214 replaced unit standard 15392.
24215 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle RQ-type or RQV-type fuel governors and complete inspection reports; renew and replace RQ-type or RQV-type fuel governor components and reassemble governor; and bench test RQ-type or RQV-type fuel governors attached to pump assemblies and adjust settings.
Standard-setting body:
Demonstrate knowledge of RAD-type and RFD-type diesel governors
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24217 replaced unit standard 15393.
24216 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of RAD-type and RFD-type diesel governors.
Standard-setting body:
Overhaul an RAD-type or RFD-type diesel governor
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24216 replaced unit standard 15393.
24217 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle RAD-type or RFD-type fuel governors and complete inspection reports; renew and replace RAD-type or RFD-type fuel governor components and reassemble governor; and bench test RAD-type or RFD-type fuel governors attached to pump assemblies and adjust settings.
Standard-setting body:
Demonstrate knowledge of R801-type and R901-type diesel governors
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24219 replaced unit standard 15394.
24218 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of R801-type and R901-type diesel governors.
Standard-setting body:
Overhaul an R801-type or R901-type diesel governor
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24218 replaced unit standard 15394.
24219 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle R801-type or R901-type fuel governors and complete inspection reports; renew and replace R801-type or R901-type fuel governor components and reassemble governor; and bench test R801-type or R901-type fuel governors attached to pump assemblies and adjust settings.
Standard-setting body:
Demonstrate knowledge of RLD-type diesel governors
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24221 replaced unit standard 15395.
24220 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of RLD-type diesel governors.
Standard-setting body:
Overhaul an RLD-type diesel governor
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24220 replaced unit standard 15395.
24221 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle an RLD-type fuel governor and complete an inspection report; renew and replace RLD-type fuel governor components and reassemble governor; and bench test an RLD-type fuel governor attached to a pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of VE-type diesel injection pump additional devices
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24223 replaced unit standard 15396.
24222 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of VE-type diesel injection pump additional devices.
Standard-setting body:
Overhaul VE-type diesel fuel injection pump additional devices
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24222 replaced unit standard 15396.
24223 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle VE-type additional devices and complete an inspection report; renew and replace VE-type additional devices and reassemble pump; and test and reset the VE-type additional devices.
Standard-setting body:
Demonstrate knowledge of Stanadyne diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24225 replaced unit standard 15398.
24224 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of Stanadyne diesel fuel injection pumps.
Standard-setting body:
Overhaul a Stanadyne diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24224 replaced unit standard 15398.
24225 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle a Stanadyne fuel injection pump and complete an inspection report; renew and replace Stanadyne fuel injection pump components and reassemble pump; and bench test a Stanadyne fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of Caterpillar diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24227 replaced unit standard 15399.
24226 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of Caterpillar diesel fuel injection pumps.
Standard-setting body:
Overhaul a Caterpillar diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24226 replaced unit standard 15399.
24227 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle a Caterpillar fuel injection pump and complete an inspection report; renew and replace Caterpillar fuel injection pump components and reassemble pump; and bench test a Caterpillar fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of DPC-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24229 replaced unit standard 15400.
24228 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of DPC-type diesel fuel injection pumps.
Standard-setting body:
Overhaul a DPC-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24228 replaced unit standard 15400.
24229 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle a DPC-type fuel injection pump and complete an inspection report; renew and replace DPC-type fuel injection pump components and reassemble pump; and bench test a DPC-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of EP9-type diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24231 replaced unit standard 15401.
24230 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of EP9-type diesel fuel injection pumps.
Standard-setting body:
Overhaul an EP9-type diesel fuel injection pump
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31393. This unit standard and unit standard 24230 replaced unit standard 15401.
24231 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to: dismantle an EP9-type fuel injection pump and complete an inspection report; renew and replace EP9-type fuel injection pump components and reassemble pump; and bench test an EP9-type fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of turbocharger diagnostic procedures
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24233 replaced unit standard 19304.
24232 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of turbocharger diagnostic procedures.
Standard-setting body:
Diagnose faults and recondition an automotive turbocharger
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24232 replaced unit standard 19304.
24233 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: prepare a turbocharger for reconditioning; dismantle a turbocharger and complete a condition report; and renew and replace turbocharger components, and reassemble unit.
Standard-setting body:
Diagnose and rectify faults in a common rail diesel fuel system
Version 2
24235 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive industry. People credited with this unit standard are able to diagnose and record faults in a common rail diesel fuel system and rectify common rail diesel fuel system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of trailer boat fuel chemistry and fuel service requirements
This standard has expired and is no longer available.
Version 2
24238 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the marine industry. People credited with this unit standard are able to demonstrate knowledge of trailer boat fuel chemistry, and fuel service requirements.
Standard-setting body:
Demonstrate knowledge of Denso electronically controlled diesel (ECD) fuel injection pumps
This standard has expired and is no longer available.
Version 2
24239 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of Denso ECD fuel injection pumps.
Standard-setting body:
Demonstrate knowledge of Bosch VP44 diesel fuel injection pumps
This standard has expired and is no longer available.
Version 2
24240 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the diesel fuel injection industry. People credited with this unit standard are able to demonstrate knowledge of Bosch VP44 diesel fuel injection pumps.
Standard-setting body:
Demonstrate knowledge of a diesel engine management system
Version 1 This unit standard replaced unit standard 15384.
31058 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of a diesel engine management system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair heavy vehicle or machine induction, forced induction and exhaust system faults
Version 1
31218 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair heavy vehicle or machine induction, forced induction, and exhaust system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe a heavy vehicle or machine induction system, turbochargers and induction and exhaust system diagnosis
Version 1
31229 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of a heavy vehicle or machine induction system; and describe turbochargers and the diagnosis of induction and exhaust systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair carburettor faults
Version 1
31267 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair carburettor faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test and repair diesel fuel injectors
Version 1 This unit standard replaced unit standard 15403.
31391 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to test and repair diesel fuel injectors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in diesel fuel injection systems
Version 1
31392 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in diesel fuel injection systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Overhaul inline diesel fuel injection pumps
Version 1 This unit standard replaced unit standard 24231.
31393 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to dismantle and reassemble inline diesel fuel injection pumps and bench test an inline diesel fuel injection pump assembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Overhaul radial piston diesel fuel injection pumps
Version 1
31394 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able dismantle and reassemble radial piston diesel fuel injection pumps and bench test a radial piston diesel fuel injection pump assembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Overhaul axial diesel fuel injection pumps
Version 1
31395 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to dismantle and reassemble axial diesel fuel injection pumps and bench test an axial diesel fuel injection pump assembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Overhaul mechanical diesel fuel governors
Version 1
31396 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to dismantle and reassemble mechanical diesel fuel governors and bench test a mechanical diesel fuel governor.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Overhaul an automotive turbocharger
Version 1
31397 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to overhaul an automotive turbocharger.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose faults in a turbocharger on a vehicle or machine, and remove and refit a turbocharger on an engine
Version 1
31398 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose faults in a turbocharger on a vehicle or machine, remove a turbocharger from an engine, and refit an overhauled turbocharger to an engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of inline diesel fuel injection pumps
Version 1
31400 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of inline diesel fuel injection pumps.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of radial piston diesel fuel injection pumps
Version 1
31401 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of radial piston diesel fuel injection pumps.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of axial diesel fuel injection pumps
Version 1
31402 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of axial diesel fuel injection pumps.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of common rail diesel fuel injection pumps
Version 1
31403 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of common rail diesel fuel injection pumps.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of Bosch mechanical diesel fuel governors
Version 1
31404 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of Bosch mechanical diesel fuel governors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of Japanese diesel fuel governors
Version 1
31405 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of Japanese diesel fuel governors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of electronic diesel fuel governors
Version 1
31406 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of electronic diesel fuel governors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive turbochargers
Version 1
31407 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of automotive turbochargers and describe conditions that affect turbocharger operation.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in automotive supercharging systems, and recondition superchargers
This standard has expired and is no longer available.
Version 4
5435 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motor industry. People credited with this unit standard are able to: diagnose and record faults in supercharging systems; remove a supercharger from an engine; recondition an automotive supercharger; and refit a supercharger to an engine.
Standard-setting body:
Demonstrate knowledge of Cummins PT diesel fuel pumps, and overhaul them
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24193 and unit standard 24194.
5451 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of Cummins PT fuel pump operation and repair procedures; dismantle a Cummins PT pump and complete an inspection report; renew and/or replace pump components and reassemble pump; and bench test a Cummins PT fuel injection pump assembly and adjust settings.
Standard-setting body:
Demonstrate knowledge of Cummins diesel fuel injectors, and overhaul them
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 19302 have been replaced by unit standard 24195, unit standard 24196, and unit standard 24197.
5452 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the fuel injection industry. People credited with this unit standard are able to: demonstrate knowledge of Cummins PT and PT Top Stop type diesel fuel injectors; and overhaul Cummins diesel fuel injectors.
Standard-setting body:
Test and repair automotive electronic fuel injection systems
This standard has expired and is no longer available.
Version 5 This unit standard, unit standard 892, and unit standard 961 have been replaced by unit standard 24090 and unit standard 24091.
5460 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to diagnose and record faults in electronic fuel injection systems, and repair faults in these systems.
Standard-setting body:
Test, diagnose, and rectify faults in an electronic fuel injection (EFI) system on an engine
This standard has expired and is no longer available.
Version 6 This unit standard, unit standard 961, and unit standard 5460 have been replaced by unit standard 24090 and unit standard 24091.
892 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to: test and diagnose faults in an EFI system on an engine; test and service the EFI fuel injectors; and rectify EFI system faults on an engine.
Standard-setting body:
Diagnose and rectify faults in a carburetted petrol fuel system
Version 5
894 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: diagnose carburetted fuel system faults and their causes; rectify carburetted fuel system faults and their causes; and diagnose and rectify air intake system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in a vehicle LPG (liquefied petroleum gas) fuel system
This standard has expired and is no longer available.
Version 6
951 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: carry out regular maintenance procedures to an LPG fuel system; demonstrate knowledge of engine tuning procedures and equipment malfunction causes on LPG fuelled vehicles; test an LPG fuel system for faults; and rectify LPG fuel system faults and their causes.
Standard-setting body:
Diagnose and rectify faults in a vehicle CNG (compressed natural gas) fuel system
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24183 and unit standard 24184.
952 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: carry out regular maintenance procedures to a CNG fuel system; demonstrate knowledge of engine tuning procedures and equipment malfunction causes on CNG fuelled vehicles; test a CNG fuel system for faults; and rectify CNG fuel system faults and their causes.
Standard-setting body:
Install an LPG (liquefied petroleum gas) fuel system to a vehicle
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24185 and unit standard 24186.
953 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of LPG as a gaseous fuel and the associated safety practices and regulations; demonstrate knowledge of the operation of an LPG fuel system and conversion requirements; and install an LPG fuel system to a vehicle.
Standard-setting body:
Install a CNG (compressed natural gas) fuel system to a vehicle
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24187 and unit standard 24188.
954 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of CNG as a gaseous fuel and the associated safety practices and regulations; demonstrate knowledge of the operation of a CNG fuel system and conversion requirements; and install a CNG fuel system to a vehicle.
Standard-setting body:
Diagnose and rectify faults in a motorcycle fuel system
This standard has expired and is no longer available.
Version 5
962 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: demonstrate knowledge of motorcycle carburettors; diagnose fuel system faults and their causes; rectify fuel system faults and their causes; and diagnose and rectify air intake system faults.
Standard-setting body:
Inspect motor vehicles for alternative fuels inspection certificate requirements
This standard has expired and is no longer available.
Version 5
982 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of the Traffic Regulations, 1976, and amendments relating to the issue of alternative fuels inspection certificates, and carry out routine inspections of LPG (liquefied petroleum gas) and CNG (compressed natural gas) fuelled vehicles to determine faults.
Standard-setting body:
Level 5
Design, fabricate, and fit a non-standard exhaust system
This standard has expired and is no longer available.
Version 4
11734 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to: determine customer requirements; make a non-standard exhaust system for a given application; and fit a non-standard exhaust system to a vehicle or machine.
Standard-setting body:
Demonstrate knowledge of exhaust system tuning for performance and noise in competition race vehicles
This standard has expired and is no longer available.
Version 2
23806 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of performance exhaust system considerations and features, and determine exhaust system tuning requirements for performance and noise to suit particular competition race vehicles.
Standard-setting body:
Retrofit a turbocharger to a petrol engine
This standard has expired and is no longer available.
Version 5
969 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of turbocharging a non-turbo engine; test an engine prior to installing a turbocharger system; and install a suitable turbocharger kit.
Standard-setting body:
Retrofit a turbocharger to a diesel engine
This standard has expired and is no longer available.
Version 5
989 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of turbocharging a non-turbo diesel engine; test the engine prior to installing a turbocharging system; and install a turbocharger kit.
Standard-setting body:
Data as at 2024-04-25 23:01:13.2