Domain - Metal Forming
TOP > Engineering and Technology > Mechanical Engineering > Metal Forming
| 0 Qualifications | 22 Assessment Standards (22 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Produce metal castings using gravity die casting machine
Version 8
2371 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare gravity die casting equipment; produce castings using gravity die casting machine; and clean the die body in the machine. This unit standard applies to gravity casting into a permanent die.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Work safely with molten metals
Version 9
2373 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the principles of personal and job safety in working with molten metal; demonstrate safe practices when working with molten metal; and describe methods for dealing with spillage or an emergency.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce moulds and cores using machines for metal casting processes
Version 8
2376 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare machine for moulding or core making processes, and make moulds and cores.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Pour molten metal into moulds
Version 8
2378 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare equipment for pouring molten metal; tap molten metal into vessel; pour molten metal into moulds; and clean vessel and complete documentation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Finish metal castings
Version 8
2379 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare castings for finishing; clean and examine raw castings; and finish castings and complete documentation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce expendable wax patterns for lost wax casting method
Version 8
2382 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare equipment for making expendable wax patterns; make a wax pattern; and make wax pattern tree assembly.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of dimensional limitations and accuracy of metal forming processes
Version 1
30429 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of dimensional accuracy of metal forming processes and the limitations of metal forming processes.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate and apply knowledge of common metal forming defects and quality control
Version 5
19741 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is designed to give operators the knowledge and skills required to recognise common defects and to ensure product quality at all stages of the metal forming process. People credited with this unit standard are able to: demonstrate knowledge of metal forming defects; metal forming quality control standards; and identify metal forming defects.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare and mix sand for metal casting processes
Version 8
2374 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are, for metal casting processes, able to: prepare for mixing of sand; mix sand using mixing equipment; test and correct sand mixture; and unload and clean mixing equipment.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce molten metal using metal melting furnace
Version 8
2377 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare furnace and materials to produce molten metal; melt metal in furnace; tap molten metal into vessel; and shut down furnace.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and test metal formed products
Version 8
2380 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to inspect and identify defective metal formed products and complete documentation, and test metal formed products for possible defects and complete documentation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and repair refractory linings and crucibles used in metal forming processes
Version 8
2381 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is designed for training in the metal forming trade and covers the inspection and repair of refractory linings for ladles, furnaces, crucibles, and launders. People credited with this unit standard are able to: inspect and report on lining or crucible condition and repair or replacement requirements; and repair and/or replace lining or crucible and complete documentation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce ceramic shell moulds for use in the investment casting process in metal casting
Version 8
2386 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare and test ceramic shell moulding materials; prepare stucco application equipment; make ceramic shell moulds; remove pattern material from mould; and prepare kiln and mould for firing, and complete documentation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Transfer and pour molten metal in an industrial situation
Version 1
30430 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: plan and prepare for transferring and pouring molten metal; transfer molten metal from furnace; pour molten metal; and clean, inspect, and maintain equipment and complete documentation.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe safety practices while working with hot and molten metals
Version 1
31908 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended primarily for use in the training of personnel in the metal forming industry. People credited with this unit standard are able to: describe causes of hazards and risks, and their mitigation and management techniques in a metal forming environment; describe possible volatile and explosive substances in a metal forming environment; describe possible effects and causes of spills and projectiles, and their management, control, and minimisation techniques; and describe safety when working with furnaces.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and repair patterns in the metal forming industry
Version 1
31910 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended primarily for use in the training of personnel in the metal forming industry. People credited with this unit standard are, under supervision, able to: prepare to inspect and repair; inspect; and repair patterns in the metal forming industry.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect, service, and repair tooling used in the metal forming industry
Version 1
31911 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended primarily for use in the training of personnel in the metal forming industry. People credited with this unit standard are, under supervision, able to prepare to inspect, service, and repair; inspect; service; and repair tooling to original condition and dimensional accuracy in the metal forming industry.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Prepare for and perform chemical analysis using optical emission spectrometry equipment
Version 5
19449 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify documentation relating to sample preparation equipment and optical emission spectrometry (OES) equipment and processes; demonstrate knowledge of sample preparation equipment and consumable materials; prepare for and perform spectrochemical analysis; investigate and report results; and perform maintenance procedures.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Produce moulds and cores by hand for metal casting processes
Version 8
2375 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare foundry tooling for moulding medium, and make moulds and cores for metal casting processes.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe metal forming and foundry processes
Version 1
31909 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended primarily for use in the training of personnel in the metal forming industry. People credited with this unit standard are able to describe: metal forming processes; metal casting processes; and foundry methods and processes.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 5
Provide solutions for casting defects
Version 5
15130 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this standard are able to prepare analysis data, and establish solution strategies for casting defects.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Determine the inclusion content of steel
Version 5
15131 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this standard are able to: prepare samples for analysis; select an inspection method; and measure the inclusion content of steel.
Consent & Moderation Requirements:
CMR 13
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-04-26 23:01:12.72