Domain - Vehicle Braking Systems
TOP > Engineering and Technology > Motor Industry > Vehicle Braking Systems
| 0 Qualifications | 56 Assessment Standards (56 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of hydraulic brake fluid, fluid replacement, and brake bleeding procedures
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 21720 and unit standard 23817 were replaced by unit standard 30568.
21689 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of hydraulic brake fluid, brake fluid replacement, and brake bleeding procedures.
Standard-setting body:
Demonstrate knowledge of motorcycle, car, light and heavy commercial vehicle braking systems
This standard has expired and is no longer available.
Version 3 This unit standard, unit standard 21689 and unit standard 23817 were replaced by unit standard 30568.
21720 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of motorcycle, car, light and heavy commercial vehicle braking systems.
Standard-setting body:
Change the fluid and bleed a brake hydraulic system
This standard has expired and is no longer available.
Version 10 This unit standard was replaced by unit standard 30518.
242 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to change the fluid in a brake hydraulic system, and bleed air from a brake hydraulic system.
Standard-setting body:
Bleed a heavy equipment or tractor mineral oil braking system
Version 2
24425 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to bleed a heavy equipment or tractor mineral oil braking system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate knowledge of foundation (drum) brakes on heavy vehicles and machines, and repair them
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 24407, unit standard 24418, and unit standard 24419. This unit standard, unit standard 15478, unit standard 15479, and unit standard 15480 replaced unit standard 2323.
15475 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This theory based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of brake lining materials and of the operational theory of foundation brakes; and inspect and repair drum brakes.
Standard-setting body:
Demonstrate knowledge of pneumatic brakes on heavy vehicles and machines
Version 4
15476 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: service brake circuits; park brake circuits; and emergency brake systems on heavy vehicles and machines.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of braking systems on truck and trailer combinations
Version 4
15477 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of trailer brake systems, and trailer brake circuits in trucks.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of heavy vehicle and machine disc brakes, and repair them
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 24422 and unit standard 24423. This unit standard, unit standard 15475, unit standard 15478, and unit standard 15479 replaced unit standard 2323.
15480 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to demonstrate knowledge of heavy vehicle and machine disc brakes, and inspect and repair disc brakes.
Standard-setting body:
Demonstrate knowledge of braking principles and system component operation for light vehicles
This standard has expired and is no longer available.
Version 2 This unit standard, unit standard 21689 and unit standard 21720 were replaced by 30568. This unit standard and unit standard 23818 replaced unit standard 8184.
23817 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: braking principles; braking system componentry and operation, and electronic braking system componentry and operation.
Standard-setting body:
Demonstrate knowledge of braking system fault diagnosis and repair requirements for light vehicles
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31063. This unit standard and unit standard 23817 replaced unit standard 8184.
23818 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of braking system fault diagnosis and repair requirements for light vehicles.
Standard-setting body:
Demonstrate knowledge of braking requirements for competition race vehicles
This standard has expired and is no longer available.
Version 2
23819 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of braking system requirements for competition race vehicles, and brake servicing requirements for a motorsport event.
Standard-setting body:
Prepare and reline brake shoes in the automotive repair industry
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24407 replaced unit standard 937.
24406 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to prepare brake shoes for relining, and reline brake shoes.
Standard-setting body:
Demonstrate knowledge of brake lining friction materials
Version 2 This unit standard and unit standard 24406 replaced unit standard 937. This unit standard, unit standard 24418, and unit standard 24419 replaced unit standard 15475.
24407 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of brake lining friction materials.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect braking system for safe operation on light vehicles, and inspect hydraulic components off the vehicle
Version 2 This unit standard and unit standard 24409 replaced unit standard 938.
24408 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: inspect a braking system for safe operation on light vehicles; and inspect hydraulic braking system components off the vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare and overhaul hydraulic braking system components from light vehicles
Version 2 This unit standard and unit standard 24408 replaced unit standard 938.
24409 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to overhaul hydraulic braking system components from light vehicles; and overhaul hydraulic braking system components from light vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of machining brake disc rotors and brake drums
Version 2 This unit standard and unit standard 24411 replaced unit standard 948.
24410 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of machining brake disc rotors and brake drums.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Machine brake disc rotors and brake drums
Version 2 This unit standard and unit standard 24410 replaced unit standard 948.
24411 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to machine brake disc rotors and brake drums.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of motorcycle braking systems and repair procedures
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24413 replaced unit standard 973.
24412 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of motorcycle braking systems, and motorcycle braking system repair procedures.
Standard-setting body:
Demonstrate knowledge of wheel tractor braking systems
Version 2 This unit standard and unit standard 24417 replaced unit standard 5437.
24416 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: wheel tractor brake systems, servicing procedures, and fault diagnosis; wheel tractor hand brake and emergency brake systems, fault diagnosis, and repair procedures; and wheel tractor auxiliary braking systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of drum brakes on heavy vehicles and machines
Version 2 This unit standard, unit standard 24407, and unit standard 24419 replaced unit standard 15475.
24418 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of drum brakes on heavy vehicles and machines.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and repair drum brakes on heavy vehicles or machines
Version 2 This unit standard, unit standard 24407, and unit standard 24418 replaced unit standard 15475.
24419 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to inspect and repair drum brakes on heavy vehicles or machines.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hydraulic brakes and testing hydraulic brakes on heavy vehicles or machines
Version 3 This unit standard and unit standard 24421 replaced unit standard 15478.
24420 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of hydraulic braking systems used on heavy vehicles or machines; and describe testing a hydraulic brake system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of heavy vehicle and equipment disc brakes
Version 2 This unit standard and unit standard 24423 replaced unit standard 15480.
24422 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of heavy vehicle and equipment disc brakes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and repair heavy vehicle and equipment disc brakes
Version 2 This unit standard and unit standard 24422 replaced unit standard 15480.
24423 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to inspect and repair heavy vehicle and equipment disc brakes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service motorcycle braking systems
This standard has expired and is no longer available.
Version 2
24424 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: inspect and test a braking system on a motorcycle; remove and replace brake components; and adjust and retest braking system performance.
Standard-setting body:
Service a brake system on a vehicle or machine
Version 2 This unit standard replaced unit standard 5466.
30517 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to service a brake system on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Bleed a hydraulic brake system
Version 1 This unit standard replaced unit standard 242.
30518 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to bleed a hydraulic brake system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of brake systems
Version 1 This unit standard replaced unit standard 21689, unit standard 21720 and unit standard 23817.
30568 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motor industry. People credited with this unit standard are able to demonstrate knowledge of brake system principles, brake system operation, and brake fluid.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and replace light vehicle brake pads and shoes
This standard has expired and is no longer available.
Version 5 This unit standard was replaced by unit standard 30517.
5466 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to determine brake pad and lining condition, remove brake pads and shoes from a light vehicle, and refit brake pads and shoes to a light vehicle.
Standard-setting body:
Explain the operation and servicing requirements of car and light commercial vehicle braking systems
This standard has expired and is no longer available.
Version 6 This unit standard was replaced by unit standard 23817 and unit standard 23818.
8184 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This theory based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: braking principles; braking system layout and componentry; and braking system fault diagnosis and repair procedures.
Standard-setting body:
Make up brake pipes for a particular braking application
Version 5
936 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to procure information relevant to making brake pipes; and make up a brake pipe to given shape, size, and specifications for a particular braking application.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe brake lining materials and reline brake shoes
This standard has expired and is no longer available.
Version 6
937 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of brake lining materials; prepare brake shoes for relining; and rivet brake linings to shoes.
Standard-setting body:
Inspect and overhaul braking system hydraulic componentry off the vehicle
This standard has expired and is no longer available.
Version 6 This unit standard was replaced by unit standard 24408 and unit standard 24409.
938 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to inspect braking system hydraulic brake components off the vehicle, and overhaul braking system hydraulic components.
Standard-setting body:
Machine brake discs and drums
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24410 and unit standard 24411.
948 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of brake disc and drum machining requirements, and machine a brake drum and a brake disc rotor.
Standard-setting body:
Level 4
Diagnose and rectify brake system faults on ride-on outdoor powered equipment
Version 4
15473 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: locate faulty brake system parts on ride-on equipment; and rectify braking system faults on ride-on equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hydraulic brakes on heavy vehicles and machines, and repair them
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 24420 and unit standard 24421. This unit standard, unit standard 15475, unit standard 15479, and unit standard 15480 replaced unit standard 2323.
15478 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of hydraulic braking systems used on heavy vehicles and equipment; test a hydraulic brake system; and repair components of a hydraulic brake system.
Standard-setting body:
Diagnose and rectify pneumatic brake faults on heavy vehicles, trailers, and machines
Version 3
15479 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: test, identify, and repair faults in pneumatic brake circuits on heavy vehicles, trailers, and machines; and test brakes in a truck and trailer combination.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and diagnose braking system faults, and repair braking systems on competition race vehicles
This standard has expired and is no longer available.
Version 2
23820 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to inspect and diagnose braking system faults on competition race vehicles, and repair braking systems on competition race vehicles.
Standard-setting body:
Diagnose and rectify brake system faults on a motorcycle
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24412 replaced unit standard 973.
24413 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: test a motorcycle braking system for faults; locate any faulty parts of a motorcycle braking system; and rectify motorcycle braking system faults.
Standard-setting body:
Demonstrate knowledge of the brake bonding process
Version 2 This unit standard and unit standard 24415 replaced unit standard 5431.
24414 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of the brake bonding process.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Bond brake shoes
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24414 replaced unit standard 5431.
24415 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the brake engineering industry. People credited with this unit standard are able to select and prepare the brake components for bonding, and carry out the brake shoe bonding operation.
Standard-setting body:
Diagnose and repair faults in wheel tractor braking systems and carry out routine maintenance
Version 2 This unit standard and unit standard 24416 replaced unit standard 5437.
24417 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: diagnose faults in wheel tractor brakes; carry out routine maintenance of wheel tractor braking systems; and repair faults in wheel tractor brakes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test and repair hydraulic brake system components on heavy vehicles or machines
Version 2 This unit standard and unit standard 24420 replaced unit standard 15478.
24421 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: test hydraulic brake systems on heavy vehicles or machines; and repair hydraulic brake system components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair hydraulic braking system faults
Version 1 This unit standard replaced unit standard 960.
31054 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair hydraulic braking system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hydraulic brake system fault diagnosis
Version 1 This unit standard replaced unit standard 23818.
31063 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of hydraulic brake system fault diagnosis.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair heavy vehicle braking system faults
Version 1
31220 Unit Standard 14 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair heavy vehicle braking system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe heavy vehicle braking systems
Version 1
31232 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe heavy vehicle pneumatic braking systems, and heavy vehicle electronic braking systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in machine hydraulic power assisted braking systems
Version 1
31263 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in machine hydraulic power assisted braking systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of a machine hydraulic power assisted braking system
Version 1
31275 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of a machine hydraulic power assisted braking system; and diagnosing faults in a hydraulic power assisted braking system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the brake bonding process, and bond brake shoes
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 24414 and unit standard 24415.
5431 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the brake engineering industry. People credited with this unit standard are able to: demonstrate knowledge of the brake bonding process; select and prepare the brake components for bonding; and carry out the brake bonding operation.
Standard-setting body:
Describe tractor braking systems, and diagnose and rectify faults in wheel tractor braking systems
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24416 and unit standard 24417.
5437 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of wheel tractor brake systems, servicing procedures, and fault diagnosis; demonstrate knowledge of tractor hand brake and emergency brake systems, fault diagnosis, and repair; demonstrate knowledge of tractor auxiliary braking systems; diagnose faults in wheel tractor brakes; carry out routine maintenance of wheel tractor braking systems; and repair faults in wheel tractor brakes.
Standard-setting body:
Diagnose and rectify brake system faults on light vehicles
This standard has expired and is no longer available.
Version 5 This unit standard was replaced by unit standard 31054.
960 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: test a braking system on a light vehicle for faults, locate faulty parts of a braking system, and rectify braking system faults.
Standard-setting body:
Diagnose and rectify brake system faults on a motorcycle
This standard has expired and is no longer available.
Version 6
973 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: demonstrate knowledge of motorcycle braking systems and their repair procedures; test a motorcycle braking system for faults; locate any faulty parts; and rectify any faulty parts of a motorcycle braking system.
Standard-setting body:
Level 5
Demonstrate knowledge of, diagnose, and rectify faults in a motorcycle anti-lock braking system
Version 4
15474 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of anti-lock braking systems (ABS) fitted to motorcycles; test a motorcycle''s ABS for faults; and rectify ABS faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Check and rectify faults on air-braked heavy vehicle anti-lock braking and traction control systems
This standard has expired and is no longer available.
Version 2
21101 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to check a heavy vehicle''s anti-lock braking system (ABS) and traction control system for compliance, and rectify ABS and/or traction control system faults.
Standard-setting body:
Diagnose and rectify faults in a car or light commercial vehicle anti-lock braking system
Version 5
974 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of anti-lock braking system (ABS) fitted to cars and light commercial vehicles; test a vehicle''s ABS for faults; and rectify ABS faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2025-05-01 23:01:07.45