Domain - Maintenance and Diagnostics in Mechanical Engineering
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Mechanical Engineering > Maintenance and Diagnostics in Mechanical Engineering
0 Qualifications | 55 Assessment Standards (47 Units & 8 Skills) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
Level 3 | ||||||
19873 | Unit |
Demonstrate knowledge of bearings used in machines and equipment |
5 Credits | |||
22901 | Unit |
Demonstrate knowledge of pumps, fans, valves and static and dynamic balancing of components |
3 Credits | |||
2397 | Unit |
Carry out routine servicing of engineering machinery |
4 Credits | |||
2398 | Unit |
Monitor, under supervision, the condition of machinery and equipment This standard has expired and is no longer available. |
4 Credits | |||
2399 | Unit |
Dismantle, inspect, assemble and test components under supervision This standard has expired and is no longer available. |
10 Credits | |||
2400 | Unit |
Describe the principles of static and dynamic balancing, and carry out static balancing This standard has expired and is no longer available. |
4 Credits | |||
2401 | Unit |
Shut down, isolate and start up machines and equipment |
3 Credits | |||
2402 | Unit |
Demonstrate knowledge of lubricants and lubrication systems, and inspect lubrication systems This standard has expired and is no longer available. |
5 Credits | |||
2403 | Unit |
Replace static seals in machines and equipment This standard has expired and is no longer available. |
5 Credits | |||
2404 | Unit |
Replace dynamic seals in machines and equipment This standard has expired and is no longer available. |
8 Credits | |||
2409 | Unit |
Level mechanical machinery |
3 Credits | |||
27203 | Unit |
Demonstrate knowledge of lubrication systems for mechanical engineering |
2 Credits | |||
27204 | Unit |
Inspect lubrication systems in a mechanical engineering context |
3 Credits | |||
27919 | Unit |
Service and maintain butterfly valves for hygienic processing operations |
4 Credits | |||
30284 | Unit |
Demonstrate and apply knowledge of the construction, function and application of seals in mechanical engineering |
2 Credits | |||
40424 | Skill |
Check the functionality of operating passenger ropeway systems |
15 Credits | |||
40425 | Skill |
Explain regulations and compliance requirements for passenger ropeway maintenance operations |
10 Credits | |||
Level 4 | ||||||
19874 | Unit |
Service and replace bearings in mechanical machinery |
8 Credits | |||
22902 | Unit |
Demonstrate knowledge of process control in mechanical engineering |
3 Credits | |||
22903 | Unit |
Demonstrate knowledge of modern manufacturing concepts and their significance in plant maintenance This standard has expired and is no longer available. |
3 Credits | |||
22904 | Unit |
Demonstrate knowledge of mechanical engineering plant maintenance |
3 Credits | |||
22905 | Unit |
Perform planned maintenance work on mechanical equipment |
5 Credits | |||
2405 | Unit |
Identify and replace bearings in machines and equipment This standard has expired and is no longer available. |
20 Credits | |||
2406 | Unit |
Dismantle, inspect, assemble and test components This standard has expired and is no longer available. |
15 Credits | |||
2407 | Unit |
Monitor the condition of mechanical machinery |
10 Credits | |||
2408 | Unit |
Align mechanical machinery |
6 Credits | |||
2410 | Unit |
Describe and use non destructive testing (NDT) technology This standard has expired and is no longer available. |
8 Credits | |||
2411 | Unit |
Test fluids used in machinery and equipment for variation from specification |
3 Credits | |||
27205 | Unit |
Describe non-destructive testing (NDT) technology used in mechanical engineering |
3 Credits | |||
27206 | Unit |
Use non-destructive testing (NDT) methods to test metal surfaces for defects |
5 Credits | |||
27918 | Unit |
Demonstrate knowledge of air conditioning plants and systems, and their major components and operation on board ships |
5 Credits | |||
27920 | Unit |
Demonstrate knowledge of reverse osmosis plants and systems, and their major components and operation on board ships |
5 Credits | |||
27921 | Unit |
Demonstrate knowledge of sewage plants and systems, and their major components and operation on board ships |
5 Credits | |||
30285 | Unit |
Demonstrate knowledge of, and replace and test dynamic seals in machinery |
8 Credits | |||
30286 | Unit |
Demonstrate knowledge of, and replace and test static seals in machinery |
5 Credits | |||
40426 | Skill |
Explain non-destructive testing (NDT) principles and applications for passenger ropeways |
5 Credits | |||
40427 | Skill |
Carry out inspection and maintenance of fixed grip technology in passenger ropeways |
10 Credits | |||
40428 | Skill |
Carry out inspection and maintenance of detachable grip technology in passenger ropeways |
20 Credits | |||
40429 | Skill |
Carry out inspection and maintenance of conveyor lifts in passenger ropeways |
15 Credits | |||
40430 | Skill |
Carry out inspection and maintenance of passenger ropeway stations and towers |
10 Credits | |||
40431 | Skill |
Carry out inspection and maintenance of wire ropes in passenger ropeways |
5 Credits | |||
Level 5 | ||||||
11401 | Unit |
Carry out tests and measurements using approved procedures within mechanical engineering contexts |
10 Credits | |||
12293 | Unit |
Establish vibration data from machinery using vibration measuring equipment |
13 Credits | |||
12294 | Unit |
Maintain machinery database and identify incipient failure of machinery from vibration analysis data |
12 Credits | |||
2412 | Unit |
Diagnose faults, overhaul, and test components in the mechanical engineering industry |
8 Credits | |||
2413 | Unit |
Test machines and/or equipment for vibration in the mechanical engineering industry |
12 Credits | |||
26564 | Unit |
Demonstrate and apply knowledge of BCM in mechanical engineering plant |
10 Credits | |||
26565 | Unit |
Demonstrate and apply knowledge of maintenance and reliability of mechanical engineering plant |
10 Credits | |||
26566 | Unit |
Demonstrate and apply knowledge of planning and scheduling mechanical engineering maintenance work in the context of BCM |
10 Credits | |||
28023 | Unit |
Demonstrate and apply knowledge of electro, proportional, and servo hydraulic components and systems |
20 Credits | |||
28114 | Unit |
Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant |
8 Credits | |||
Level 6 | ||||||
11399 | Unit |
Develop, implement, and review maintenance plans for mechanical engineering systems |
20 Credits | |||
11400 | Unit |
Manage testing and measuring procedures within mechanical engineering contexts |
5 Credits | |||
21780 | Unit |
Develop and implement a design plan for a mechanical engineering project |
20 Credits | |||
21786 | Unit |
Select and specify materials for mechanical engineering applications |
20 Credits |