Domain - Extractive Industries Management
TOP > Engineering and Technology > Extractive Industries > Extractive Industries Management
| 0 Qualifications | 123 Assessment Standards (94 Units & 29 Coversheets) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of the Mines Rescue Service
This standard has expired and is no longer available.
Version 4 This unit standard was replaced by unit standard 30905.
15672 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe: the historical significance and geographical distribution of mines rescue facilities; the services provided by Mines Rescue Service and related hazards; and identify situations requiring a Mines Rescue Service response and describe procedures for initiating a Mines Rescue Service response.
Standard-setting body:
Demonstrate basic knowledge of coal quality assurance
Version 3
19737 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the impact of geology on coal quality; and demonstrate knowledge of coal utilisation and coal quality assurance.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Handle reagents for transportation, storage, mixing, and use at an extractive site
This standard has expired and is no longer available.
Version 4
24474 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPGP202D. People credited with this standard are able to: plan and prepare for reagents handling; start up equipment in sequence; mix reagents; add reagents; transfer and store reagents; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Operate heat exchangers that form part of a heating, cooling, or refrigeration system at an extractive site
This standard has expired and is no longer available.
Version 4
24475 Coversheet 3 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency PMAOPS205B. People credited with this standard are able to: prepare for work; operate heat exchangers; and isolate and de-isolate plant at an extractive site.
Standard-setting body:
Operate raw material feed systems at an extractive site
This standard has expired and is no longer available.
Version 4
24476 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPHA201D. People credited with this standard are able to: plan and prepare for operating raw material feed systems; and deliver raw materials at an extractive site.
Standard-setting body:
Use simple maths to solve extractives related problems
Version 3
25880 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to solve extractives related number problems, and use area, volume, and mass calculations to solve extractives related problems.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Operate programmable logic control systems at an extractive site
This standard has expired and is no longer available.
Version 3
26750 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPRO203D. People credited with this standard are able to: prepare for programmable logic control systems operations; and monitor and control operations at an extractive site.
Standard-setting body:
Handle, store, and use cyanide at an extractive site
This standard has expired and is no longer available.
Version 3
26752 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPGP205D. People credited with this standard are able to: plan and prepare to access and apply site cyanide safety procedures; apply personal safety measures; identify and report incidents/hazards; protect workers and the environment during cyanide handling and storage; manage cyanide process solutions and HCN gas emissions to protect human health and the environment; protect workers'' health and safety from exposure to cyanide solutions and HCN gas; and apply emergency procedures at an extractive site.
Standard-setting body:
Treat and dispose of rejects and tailings at an extractive site
This standard has expired and is no longer available.
Version 3
26753 Coversheet 2 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIWBP201D. People credited with this standard are able to: plan and prepare for the treatment and disposal of rejects and tailings; and carry out treatment, disposal, and post operational procedures at an extractive site.
Standard-setting body:
Distribute tailings at an extractive site
This standard has expired and is no longer available.
Version 3
26754 Coversheet 2 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIWBP202D. People credited with this standard are able to: plan and prepare to distribute tailings; start up equipment in sequence; monitor and disperse tailings; conduct housekeeping activities; and shut down in sequence and/or isolate equipment at an extractive site.
Standard-setting body:
Monitor tailings dam environment at an extractive site
This standard has expired and is no longer available.
Version 3
26755 Coversheet 2 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIWBP203B. People credited with this standard are able to: monitor impact on flora and fauna; and monitor integrity of the dam at an extractive site.
Standard-setting body:
Demonstrate knowledge of the Underground Mines Emergency Protocol
Version 1 This unit standard replaced unit standard 15672.
30905 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe: the processes and framework of the Underground Mines Emergency Protocol (the protocol); the roles and responsibilities of stakeholders and persons appointed to fill roles within the protocol; and emergency situations that would trigger the activation of the protocol and the procedures for activation of the protocol.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of worker health in the extractive industries
Version 1
31762 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of worker health in the extractive industries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of continuing professional development requirements in the extractive industries
Version 1
31763 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for holders of extractives certificates of competence (CoCs) who must comply with gazetted continuing professional development (CPD) requirements. People credited with this unit standard are able to: demonstrate knowledge of CPD for extractives CoC holders, and complete CPD activity logbook records for a specific CoC.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and apply hazard identification and risk assessment procedures in an extractives environment under supervision
Version 1
32864 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe health and safety hazard identification and risk assessment in an extractives environment, and apply hazard identification and risk assessment procedures in an extractives environment under supervision.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct safety checks before and after equipment use at an extractive site
Version 7
8922 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to conduct safety checks before and after equipment usage at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate knowledge of explosives and their properties
Version 6
17694 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of current legislative and licensing requirements associated with explosives and demonstrate knowledge of explosives products and related equipment.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Attach, lift, move, and place loads using mobile plant
Version 5
17695 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able, using mobile plant, to: prepare for a lift; select and inspect plant and lifting equipment; perform lift; communicate with dogman; and attach and pull a load.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of and follow safe working practices at an extractive site
Version 3
23648 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers general safety practices for workers in extractive industries. People credited with this unit standard are able to: demonstrate knowledge of emergency and evacuation procedures; identify and report hazardous situations and participate in risk management procedures; demonstrate knowledge of fire prevention and control procedures; demonstrate personal safety; demonstrate correct posture for manual handling; demonstrate knowledge of hazardous substances and their effects; and identify and demonstrate the use of the isolation and safety tag system, at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Assess ground conditions at an extractive site
This standard has expired and is no longer available.
Version 4
24470 Coversheet 4 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIMEX302D. People credited with this standard are able to: plan and prepare for assessment of ground conditions; inspect and assess ground conditions; and record and report ground conditions at an extractive site.
Standard-setting body:
Cast ingots at an extractive site
This standard has expired and is no longer available.
Version 4
24478 Coversheet 3 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPSM302D. People credited with this standard are able to: plan and prepare for casting operations; prepare moulds/launder systems; cast metal; remove cast metal; shut down in sequence and/or isolate equipment; and carry out housekeeping activities at an extractive site.
Standard-setting body:
Conduct calcinations activities at an extractive site
This standard has expired and is no longer available.
Version 4
24479 Coversheet 2 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPBE301D. People credited with this standard are able to: plan and prepare for calcination operations; start up equipment in sequence; operate and monitor equipment; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Conduct electrowinning/electro-refining operations at an extractive site
This standard has expired and is no longer available.
Version 4
24480 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPRE301D. People credited with this standard are able to: plan and prepare for electrowinning/electro-refining; monitor electrowinning/electro-refining; pull and strip plates; shut down in sequence and/or isolate equipment; and conduct housekeeping activities and return cell to service at an extractive site.
Standard-setting body:
Conduct elution processes at an extractive site
This standard has expired and is no longer available.
Version 4
24481 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPRE302D. People credited with this standard are able to: plan and prepare for elution process; start up equipment in sequence; operate and monitor equipment; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Conduct gold room operations at an extractive site
This standard has expired and is no longer available.
Version 4
24482 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPRE303D. People credited with this standard are able to: plan and prepare for gold room operation; start up equipment in sequence; operate and monitor smelting equipment; prepare electrowinning products for smelting; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Conduct leaching process at an extractive site
This standard has expired and is no longer available.
Version 4
24483 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPBE306D. People credited with this standard are able to: plan and prepare for leaching process; start up equipment in sequence; operate and monitor equipment; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Conduct milling/grinding at an extractive site
This standard has expired and is no longer available.
Version 4
24484 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPHA301D. People credited with this standard are able to: plan and prepare for milling/grinding process; start up equipment in sequence; operate and monitor equipment and lubrication system; monitor and control classification; charge mill; conduct housekeeping activities; and shut down in sequence and/or isolate equipment at an extractive site.
Standard-setting body:
Conduct thickening and clarifying process at an extractive site
This standard has expired and is no longer available.
Version 4
24485 Coversheet 7 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPBE308D. People credited with this standard are able to: plan and prepare for thickening and clarifying process; start up equipment in sequence; operate and monitor equipment; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Operate furnaces at an extractive site
This standard has expired and is no longer available.
Version 4
24487 Coversheet 3 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIPSM304D. People credited with this standard are able to: plan and prepare for furnace operations; start up furnace; monitor and control the smelting process; and shut down furnace at an extractive site.
Standard-setting body:
Describe the effects of an extractive site on the environment and related requirements and responsibilities
Version 3 This unit standard and unit standard 25877 replaced unit standard 20732.
25876 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe environmental resources and the environmental effects an extractive site has on the environment; and describe employee requirements and responsibilities relating to the environment at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of crushing and screening plant for extractive industries
This standard has expired and is no longer available.
Version 3
25878 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of crushing plant and screening plant for extractive industries.
Standard-setting body:
Operate conveyors at an extractive site
This standard has expired and is no longer available.
Version 4 This unit standard, unit standard 25882, unit standard 25883, and unit standard 25884 replaced unit standard 8908.
25881 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, at an extractive site: carry out pre-start checks for conveyors; operate and monitor conveyor plant; describe hazards associated with the operation of conveyors; and complete post operation shutdown of conveyors.
Standard-setting body:
Operate screens at an extractive site
This standard has expired and is no longer available.
Version 4 This unit standard, unit standard 25881, unit standard 25882, and unit standard 25884 replaced unit standard 8908.
25883 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, at an extractive site: carry out pre-start checks for screens; operate and monitor screens; describe hazards associated with the operation of screens at an extractives site; and complete post operation shutdown of screens.
Standard-setting body:
Control operations in acid plant at an extractive site
This standard has expired and is no longer available.
Version 3
26751 Coversheet 3 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPBP302D. People credited with this standard are able to: plan and prepare for control of acid plant operations; manage acid plant operations; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Conduct filtering process at an extractive site
This standard has expired and is no longer available.
Version 3
26756 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPBE303D. People credited with this standard are able to: plan and prepare for the filtering process; start up equipment in sequence; operate and monitor equipment; shut down in sequence and/or isolate equipment at an extractive site; and conduct housekeeping activities.
Standard-setting body:
Conduct pressure oxidation at an extractive site
This standard has expired and is no longer available.
Version 3
26757 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPBE307D. People credited with this standard are able to: plan and prepare for pressure oxidation process; start up equipment in sequence; operate and monitor equipment; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Conduct flotation process at an extractive site
This standard has expired and is no longer available.
Version 3
26758 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPBE310D. People credited with this standard are able to: plan and prepare for flotation process; start up equipment in sequence; operate and monitor flotation equipment; shut down in sequence and/or isolate equipment; and conduct housekeeping activities at an extractive site.
Standard-setting body:
Operate crushers at an extractive site
This standard has expired and is no longer available.
Version 3 This unit standard replaced unit standard 8897, unit standard 8898, and unit standard 8911.
28794 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, at an extractive site: carry out pre-start checks for crushers; operate and monitor crusher plant; describe hazards associated with the operation of crushers; and complete post-operation shutdown of crushers.
Standard-setting body:
Demonstrate knowledge of conveyors, and crushing and screening plant for extractive industries
Version 1 This unit standard replaced unit standard 25878.
31092 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of conveyors, crushing plant, and screening plant for extractive industries.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Maintain screens on production plant at an extractives site
Version 7
8903 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able, at an extractives site, to: describe the process of screen media replacement; describe hazards and controls associated with screen media replacement; monitor screen media wear; carry out screen media maintenance or replacement; and carry out maintenance work on other components of screens and test-run screen.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of construction and maintenance of working surfaces at an extractive site
Version 9
8905 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for an extractive site: evaluate existing features of working surfaces; demonstrate knowledge of the layout of working surfaces; describe construction methods and equipment for working surfaces; and describe methods for maintaining working surfaces.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Manufacture ANFO explosives
Version 4
15247 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: select ingredients to manufacture ANFO; check the working order of the ANFO mixing equipment; mix ANFO ingredients; and carry out ANFO post-mixing procedures.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select processing plant for extractive industries
This standard has expired and is no longer available.
Version 1
15661 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: select crushing plant for extractive industries; and select screening plant for extractive industries.
Standard-setting body:
NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)
Demonstrate knowledge of hazardous substances at an extractive site
Version 5
16687 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the Hazardous Substances and New Organisms Act 1996 and the HSW (Hazardous Substances) Regulations 2017; explain the nature of hazardous substances and their potential effects; and interpret key written information on labels, safety data-sheets (SDS), and company data-sheets for hazardous substances.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Deal with mine fires using extinguishing agents
Version 5
16697 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the usage of different forms of mine fire-fighting extinguishing agents and methods; fight the fire in an actual or simulated situation; and decommission, check and re-commission fire-fighting equipment, and facilitate debriefing.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Use mathematics to solve problems in an extractive industries workplace
Version 5
17691 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: solve arithmetical problems; solve mensuration problems; solve trigonometrical problems; solve geometrical problems; and use algebra to solve workplace problems, in an extractive industries workplace.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of survey principles and apply to an extraction site
Version 5
17743 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of survey principles and apply to positions; demonstrate knowledge of the application of different plans, maps or photographs; and demonstrate knowledge of the uses of survey tools at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Read and interpret extractive site plans
Version 5
17744 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to read and interpret extractive site plans.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate a belt wagon at an extraction site
Version 4
17979 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: operate and describe the operational characteristics and performance of belt wagons; describe and demonstrate the safety systems, adjustments, and checks required for belt wagons; describe the mining plan and production requirements for the shift operation; and carry out shift-end, shut-down procedures and complete documentation for the belt wagon.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate a bucket wheel excavator at an extraction site
Version 4
17980 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: operate and describe the operational characteristics and performance of bucket wheel excavators (BWE); describe and demonstrate the safety systems, adjustments, and checks required for a BWE; describe the mining plan and production requirements for the shift operation; carry out shift-end, shut-down procedures and complete documentation for a BWE, at an extraction site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate control rooms at an extraction site
Version 4
17982 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the purpose and layout of control rooms; describe and demonstrate the operation of a control room; describe and demonstrate the safety systems and checks required for control rooms; and carry out shift-end requirements and complete documentation for control room operation, at an extraction site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate a gravity separation system at an extraction site
Version 4
17984 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: operate and describe the operational characteristics and performance of a gravity separator; describe and demonstrate the adjustments and checks, and safety systems required for a gravity separator; describe and demonstrate the production requirements for the gravity separator operation; carry out shut-down procedures and complete documentation for a gravity separator.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate high-capacity slurry pumping systems at an extraction site
Version 4
17985 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the operational characteristics and performance of, and demonstrate ability to operate, high capacity slurry pumping systems; describe and demonstrate the adjustments and checks, safety systems required, and identify and remedy problems; describe the environmental constraints and controls for high capacity slurry pumping systems; and complete documentation requirements for high-capacity slurry pumping systems.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate magnetic separation systems at an extraction site
Version 4
17986 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: operate magnetic separators and describe their operational characteristics and performance; describe and demonstrate adjustments and checks, and safety systems for magnetic separators; describe and demonstrate the production requirements for the magnetic separator operation; carry out shift-end, shut-down procedures and complete documentation for magnetic separators, at an extraction site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe, operate, and control recyclable water systems at an extraction site
Version 4
17989 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: operate recyclable water systems and describe their operational characteristics and performance; describe and demonstrate the safety systems, adjustments and checks required for recyclable water systems; describe the environmental constraints and demonstrate controls for recyclable water systems; carry out shift-end, shut-down procedures and complete documentation for recyclable water systems.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and operate slurry pumping systems at an extraction site
Version 4
17991 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the operational characteristics and performance of slurry pumping systems; describe the adjustments and checks, and safety systems required for slurry pumping systems; check readiness and operate slurry pumping systems; describe the in-stream analysing systems used for slurry pumping; and complete the documentation requirements for slurry pumping systems.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Check, operate, recommission, and store mines rescue equipment
This standard has expired and is no longer available.
Version 6
19859 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: carry out pre-operational checks on mines rescue equipment; operate equipment for mines rescue; clean, sterilise, recommission, test, and store used equipment; and complete documentation related to mines rescue equipment.
Standard-setting body:
Supervise a mines rescue team during a mines rescue operation
This standard has expired and is no longer available.
Version 6
19864 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: liaise with relevant stakeholders to determine the operational plan for a mines rescue operation; prepare the team for the mines rescue operation; supervise a mines rescue team during a mines rescue operation; supervise the checking and returning of used mines rescue equipment to storage ready for redeployment; and complete documentation and carry out a debriefing.
Standard-setting body:
Describe the legal and operational requirements for an approved handler for Class 1 substances
Version 5
20333 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the requirements of the Hazardous Substances and New Organisms (HSNO) Act 1996 and relevant regulations as they apply to an approved handler for Class 1 substances, and describe the safety and protection procedures for handling Class 1 substances as an approved handler.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe the legal and operational requirements for a test certifier of Class 1 substances
This standard has expired and is no longer available.
Version 6
20334 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the requirements of the Hazardous Substances and New Organisms (HSNO) Act 1996 and relevant regulations as they apply to a test certifier of Class 1 substances, and describe the safety and protection procedures for handling Class 1 substances as a test certifier.
Standard-setting body:
Demonstrate and apply knowledge of storing explosives for use
Version 4
21152 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe how the location and construction of a magazine for explosives is planned; describe the process of applying for test certificates and permits to build a magazine and store explosives; describe the process of loading and maintaining a magazine; and store explosives for use.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the management and use of water at an extractive site
Version 4 This unit standard replaced unit standard 8912.
21155 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: consent conditions and the water management system for an extractive site; and the operation and maintenance of systems relating to water use at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of and select crushing and screening plant for extractive industries
This standard has expired and is no longer available.
Version 2 This unit standard has been replaced by unit standard 25878 and unit standard 25879. This unit standard replaced unit standard 15661.
21157 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of crushing plant for extractive industries; analyse and select crushing plant for extractive industries; and describe screening plant and selection criteria for extractive industries.
Standard-setting body:
NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)
Demonstrate knowledge of the use of electrical reticulation plant and equipment in extractive operations
Version 4
21661 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of the use of electrical reticulation plant and equipment in extractive operations.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of pneumatic and hydraulic power systems used in extractive operations
Version 4 This unit standard replaced unit standard 18704.
22057 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of pneumatic and hydraulic plant and equipment used in extractive operations.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Apply risk management processes at an extractive site
Version 4
24469 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIRIS301E. People credited with this standard are able to: plan and prepare for risk management; identify and assess unacceptable risk; identify and recommend risk controls; contribute to the implementation of risk controls; and review risk management documentation, at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Respond to local emergencies and incidents at an extractive site
Version 5
24473 Coversheet 5 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIERR302D. People credited with this standard are able to: plan and prepare to respond to local emergencies and incidents; and respond to emergency or incident situations at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and maintain conveyors at an extractive site
This standard has expired and is no longer available.
Version 4 This unit standard, unit standard 25881, unit standard 25883, and unit standard 25884 replaced unit standard 8908.
25882 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, at an extractive site: determine maintenance requirements for conveyors; describe hazards associated with the maintenance of conveyors; carry out maintenance on conveyors; track and tension belts on conveyors; and restore conveyors to operational status and complete documentation relevant to maintenance of conveyors.
Standard-setting body:
Inspect and maintain screens at an extractive site
This standard has expired and is no longer available.
Version 4 This unit standard, unit standard 25881, unit standard 25882, and unit standard 25883, replaced unit standard 8908.
25884 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, at an extractive site: determine maintenance requirements for screens; describe hazards associated with the maintenance of screens; carry out maintenance on screens; tension screens; and restore screens to operational status at an extractive site and complete documentation relevant to maintenance of screens.
Standard-setting body:
Analyse Human Factors present in workplace practices at an extractive site
Version 3
26855 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of concepts and principles related to Human Factors; analyse workplace practices at an extractive site by examining Human Factors that could contribute to error-producing conditions; and recommend controls that will reduce the likelihood of error-producing conditions resulting from Human Factors in the underlying workplace practice.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out the risk management processes at an extractive site
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 28983.
26856 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the skills and knowledge required to carry out risk management processes at an extractive site. People credited with this unit standard are able to: determine the risk management process to be carried out at an extractive site; identify hazards; assess risk; identify unacceptable risk and potential actions for risk control; decide on, and implement or facilitate risk control action; review the implementation of risk control action; and complete records and reports for risk management at an extractive site.
Standard-setting body:
Explain legislation related to health and safety, and supporting documents, applicable to an extractive site
Version 3
28742 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to explain legislation related to health and safety, and supporting documents, applicable to an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate and apply knowledge of requirements and procedures to minimise environmental impact at an extractive site
Version 4
28792 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of environmental approvals relevant to an extractive site; identify potential sources of pollution from an extractive site and describe methods to minimise them; and control day-to-day operations to ensure compliance with relevant environmental approvals at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Conduct safety inspections for extractive operations
Version 2
28793 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the relationship and connections between safety inspections, the safety management system, and the risk assessment process; and conduct safety inspections for extractive operations.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and maintain crushers at an extractive site
This standard has expired and is no longer available.
Version 3
28795 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, at an extractive site: determine maintenance requirements for crushers; describe hazards associated with the maintenance of crushers; carry out maintenance on crushers; restore crushers to operational status at an extractives site; and complete documentation relevant to the maintenance of crushers.
Standard-setting body:
Operate and maintain stockpiles and tip heads at extractive sites
This standard is expiring. The last date for assessment to take place is Tue Dec 31 00:00:00 NZDT 2024.
Version 3 This unit standard was replaced by unit standard 32283 and unit standard 32284. This unit standard replaced unit standard 8899.
31091 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of hazards and controls associated with stockpiling and tip heads at extractive sites; follow and recommend modifications for a stockpiling management plan at an extractive site; and follow and recommend modifications for a tip head management plan at an extractive site.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of assessing, monitoring, and controlling risks to worker health in the extractive industries
Version 1
31761 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of assessing, monitoring, and controlling risks to worker health in the extractive industries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Explain hazards and controls associated with stockpiling and tip heads at extractive sites
Version 1 This unit standard and unit standard 32284 replaced unit standard 31091.
32283 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to explain hazards and controls associated with stockpiling and tip heads at extractive sites.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Follow, maintain and recommend modifications for stockpiling and tip head management plans at an extractive site
Version 1 This unit standard and unit standard 32283 replaced unit standard 31091.
32284 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for an extractive site, follow and recommend modifications for: a stockpiling management plan; and a tip head management plan.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Store explosives for use in extractive industries
This standard has expired and is no longer available.
Version 5
8890 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: plan the location and construction of a magazine for explosives; apply for permits to build a magazine and store explosives; and load a magazine.
Standard-setting body:
NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)
Operate and maintain stockpile storage for product processed at extractive sites
This standard has expired and is no longer available.
Version 8
8899 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the output requirements for stockpiling processed product at extractive sites; and follow and modify a stockpiling layout plan at an extractive site in response to ongoing conditions.
Standard-setting body:
Level 5
Demonstrate knowledge of the selection of excavation and transportation plant and equipment for surface extraction
This standard has expired and is no longer available.
Version 5 This unit standard and unit standard 15667 were replaced by unit standard 30902.
15658 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of the selection of: excavation plant and equipment for surface extraction; and transportation plant and equipment for surface extraction.
Standard-setting body:
Select excavation and transportation plant for underground coal extraction
This standard has expired and is no longer available.
Version 1
15659 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of, and select suitable underground coal extraction plant; and demonstrate knowledge of, and select, suitable underground coal transporters.
Standard-setting body:
NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)
Demonstrate knowledge of theoretical mechanics and apply in laboratory conditions
This standard has expired and is no longer available.
Version 2
15671 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the relationship between static force systems and the effects of forces on simple components and structures; explain how certain characteristics of metals can be determined by applying different tests; demonstrate knowledge of the purpose of the main components in simple machines; demonstrate knowledge of some fundamentals of static fluids; and apply basic principles of mechanics in a laboratory situation.
Standard-setting body:
NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)
Conduct an incident investigation at an extractive site
Version 5
16686 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the concepts of multiple causation and root-cause analysis; and conduct an incident investigation at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Use advanced mathematics to solve problems in an extractive industries workplace
Version 5
17692 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: solve advanced mensuration and trigonometry problems; use advanced algebra to solve workplace problems; solve pumping and other complex workplace problems requiring the use of performance curves; use vectors and vector mathematics and statistics to solve complex workplace problems, in an extractive industries workplace.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select, design, maintain, and manage stockpiles at an extractive site
Version 5
17992 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify the objectives, evaluate the stockpile site options, select the design, and construct a stockpile; maintain and manage the stockpile; and complete the documentation and reporting required for stockpiles.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate advanced knowledge of coal quality assurance
Version 3
19738 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the causes and consequences of variations in coal quality; demonstrate knowledge of coal quality sampling; demonstrate knowledge of the impact of variations in coal quality on coal utilisation; and demonstrate knowledge of coal quality assurance.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe and manage health, fitness, and well being of persons involved in mines rescue operations
This standard has expired and is no longer available.
Version 4
19862 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for experienced underground workers in extractive industries. People credited with this unit standard are able to: describe the physical fitness, medical, and legal requirements that contribute to the safe performance of brigadesmen's duties; undertake medical and physical fitness tests, and complete a physical fitness course; describe the environmental and physical conditions that may affect the well being of mines rescue personnel; and complete MRS documentation related to health and fitness.
Standard-setting body:
Demonstrate knowledge of planning and managing extraction to minimise environmental impacts
Version 4 This unit standard replaced unit standard 8913.
21156 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain how a plan is prepared to minimise the environmental impacts of an extractive site; demonstrate knowledge of the process for seeking resource consent for an extractive site; evaluate programmes to minimise environmental impacts at an extractive site; and demonstrate knowledge of how to manage an extractive site to minimise environmental impacts.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Evaluate plans to manage old workings and inundations at extractive sites
Version 4 This unit standard replaced unit standard 17746.
21629 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for extractive sites: explain the reasons why old workings are a hazard, and explain methods for safely approaching and working through them; explain the type of infrastructure and plans required to safely work in proximity to, and through, old workings; evaluate the hazards and causes of inrush and inundations and explain methods for managing them; identify and evaluate the documentation and reporting requirements for approaching and working through old workings and for inundation management.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of theoretical mechanics for extractive industries
Version 3 This unit standard replaced unit standard 15671.
22056 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to explain: the relationship between static force systems and the effects of forces on simple components and structures; methods for determining characteristics of metals; the mechanics applied to components of machinery, and the fundamentals of static fluids, for extractive industries.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the environmental effects of a specific extractive site and related legislative requirements
Version 3 This unit standard and unit standard 25876 replaced unit standard 20732.
25877 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the effects of an extractive site on the environment; demonstrate knowledge of legislation affecting environmental requirements of an extractive site; explain the requirements in an environmental emergency at an extractive site; and explain the environmental requirements for a specific extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Select crushing and screening plant for extractive industries
Version 3 This unit standard and unit standard 25878 replaced unit standard 21157.
25879 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: analyse and select crushing plant for extractive industries, analyse and select screen types for extractive industries, and evaluate the layout of the selected plant.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Supervise processing operations at an extractive site
This standard has expired and is no longer available.
Version 3
26759 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This unit standard comprises this cover sheet and Australian unit of competency RIIPRO401D. This standard covers the supervision of processing operations at an extractive site. It is appropriate for those working in processing plant supervisory roles within the extractives industry. People credited with this standard are able to: plan and prepare for supervision of processing operations; initiate processing operations and maintenance activities; and monitor, adjust, and report on the execution of processing operations at an extractive site.
Standard-setting body:
Demonstrate knowledge of a social licence to operate for an extractive site
Version 5
28796 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of a social licence to operate for an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Develop standard operating procedures for an extractive site
Version 4
28982 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify the key components of an extractive site operations activity; write a standard operating procedure (SOP); and demonstrate knowledge of testing, and review the documented SOP.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out the risk management process at an extractive site
Version 2 This unit standard replaced unit standard 26856.
28983 Coversheet 10 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIRIS402E. People credited with this standard are able to: plan and prepare for implementing the risk management process; identify workplace hazards; assess workplace risks and identify unacceptable risk levels; identify potential actions and develop risk controls; implement and evaluate risk controls; and audit the risk management process and complete records at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of extraction methods, and selection of plant and equipment for surface extraction
Version 1 This unit standard replaced unit standard 15658 and unit standard 15667.
30902 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: the effects of geological and geotechnical characteristics on surface extraction methods; and surface extraction methods and selection of plant and equipment.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and report on safety and operations at an extractive site
Version 8
7143 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: review company documentation relating to legislative requirements for an extractive site''s operational safety; inspect an extractive site''s safety and operations; demonstrate knowledge of reporting on the compliance status of an extractive site; and demonstrate knowledge of auditing and reviewing the health and safety management system at an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Review plans and recommend changes for ongoing operations at an extractive site
Version 8
7144 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify and review relevant documentation for safe and effective operation of plant and equipment at an extractive site; review operational objectives, plans, and documents; and recommend changes proposed as a result of the review.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare a safety inspection plan for extractive operations
Version 8
8902 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare a safety inspection plan for extractive operations.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 6
Analyse and select mining and transportation plant for a metalliferous underground extractive site
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 15670 were replaced by unit standard 30903.
15660 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to analyse and select: development machinery and materials; underground ore extraction machinery and materials; and underground transportation methods for metalliferous mines and tunnels.
Standard-setting body:
Explain and determine water flow, and describe the selection of pumps and structures for an extractive site
Version 5
17693 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain water flow concepts and water quality properties; determine surface water flows in and around extractive sites; demonstrate knowledge of ground water flows at extractive sites; describe the selection process for a pumping system for extractive sites; and explain the purpose of hydraulic structures and describe the selection process for extractive sites.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manage a mines rescue team during underground fire operations
This standard has expired and is no longer available.
Version 6
19861 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: plan an underground fire operation; select equipment and supervise pre-operational checks; supervise the management of the fire and the application of extinguishing methods; supervise the checking and storing of used equipment; and complete documentation and carry out a debriefing.
Standard-setting body:
Demonstrate knowledge of planning rehabilitation operations for an extractive site
Version 4 This unit standard replaced unit standard 7168.
21151 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of planning rehabilitation operations for an extractive site; describe the process of scheduling extractive operations and rehabilitation to comply with the approved site plan; and demonstrate knowledge of how to ensure rehabilitation work meets the extractive site operation and closure requirements set out in the relevant approvals.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Analyse and select mining and transportation plant for underground coalmines
This standard has expired and is no longer available.
Version 3 This unit standard and unit standard 15668 were replaced by unit standard 30904. This unit standard replaced unit standard 15659.
21823 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to analyse and select suitable: underground coal development machinery; underground coal extraction machinery; and underground coal transport, for underground coalmines.
Standard-setting body:
Investigate and analyse extractive site incidents
This standard has expired and is no longer available.
Version 4
23545 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the value of a robust investigation into an incident; demonstrate knowledge of and determine the objective and form of an investigation; demonstrate knowledge of and select a range of techniques and tools that may be used to investigate an incident; conduct an incident investigation into an extractive site incident or near hit; and critique an incident investigation report.
Standard-setting body:
Develop, implement, and review maintenance plans for an extractive site
Version 2
23649 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify and quantify maintenance requirements; develop a maintenance plan; implement a maintenance plan; and review a maintenance plan, for an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Undertake production planning, monitor, and make recommendations for improvements in production for an extractive site
Version 2
23650 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: undertake production planning; monitor production; compare production plan with previously achieved outcomes; develop and analyse key performance indicators and/or measures and make recommendations for improvements in production, for an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Establish and maintain risk management systems at an extractive site
Version 2 This unit standard replaced unit standard 23547.
28739 Coversheet 15 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIRIS601E. People credited with this standard are able to: plan and prepare to establish the framework for the risk management system; establish processes to support the risk management system; plan and facilitate the implementation of the risk management system; and audit the management processes, at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Establish and maintain the work, health and safety (WHS) management system at an extractive site
Version 2 This unit standard replaced unit standard 23548.
28740 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIWHS601E. People credited with this standard are able to: establish and maintain the framework for the WHS Management System; establish and maintain participative arrangements for the management of WHS; establish and maintain procedures for identifying hazards; establish and maintain procedures for assessing risk; establish and maintain procedures for treating risks; establish and maintain organisational procedures for dealing with unplanned incidents; establish and maintain a WHS training program; establish and maintain a system for WHS records; plan and prepare for the implementation of the WHS Management System; and evaluate the organisation''s WHS Management System and related policies, procedures and programs, at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Establish and maintain the environmental management system at an extractive site
Version 2 This unit standard replaced unit standard 23549.
28741 Coversheet 20 Credits
View Education Organisations with Consent to Assess »
This standard comprises this cover sheet and Australian unit of competency RIIENV601E. People credited with this standard are able to: establish and maintain the framework for the environmental management system; establish and maintain participative arrangements for the environmental management system; establish and maintain procedures for identifying environmental hazards; establish and maintain procedures for assessing environmental risk; establish and maintain procedures for treating environmental risk; establish and maintain organisational procedures for dealing with hazardous environmental events; establish and maintain an environmental training program; establish and maintain a system for environmental records; and evaluate the organisational environmental management system and related policies, procedures and programs, at an extractive site.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Survey and produce statutory mine plans
Version 2 This unit standard replaced unit standard 17742 and unit standard 17745.
29087 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: plan, establish, validate, and maintain survey control for a mine; survey and produce data for a mine; and produce statutory mine plans.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of mining methods, and analyse and select plant for metalliferous underground extraction
Version 1 This unit standard replaced unit standard 15660 and unit standard 15670.
30903 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of geological features of metalliferous ore bodies in relation to mining methods; describe support requirements and potential hazards in metalliferous mines; demonstrate knowledge of metalliferous mine development methods; demonstrate knowledge of metalliferous extraction methods; and analyse and select development machinery and materials, underground ore extraction machinery and materials, and underground transportation methods for metalliferous mines.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of mining methods, and analyse and select plant for underground coalmines
Version 1 This unit standard replaced unit standard 15668 and unit standard 21823.
30904 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of geological features of coal measures in relation to underground mining methods; describe support requirements and potential hazards in underground coal mines; demonstrate knowledge of underground coal mining development methods, and underground coal extraction methods; and analyse and select suitable underground coal development machinery, underground coal extraction machinery, and underground coal transport, for underground coalmines.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the application of regulatory requirements to manage an extractive site
Version 9
7142 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to explain: the application of the Health and Safety at Work (HSW) Act 2015; the application of the Resource Management Act 1991; the application of the Crown Minerals Act 1991; the application of the Hazardous Substances and New Organisms (HSNO) Act 1996, the HSW (Hazardous Substances) Regulations 2017; and the application of the Mines Rescue Act 2013; and any subsequent amendments or replacements relevant to management practices of an extractive site.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Determine and plan reclamation operations of an extractive site
This standard has expired and is no longer available.
Version 4
7168 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: determine and plan reclamation operations of an extractive site; schedule mining, stripping, and restoration to comply with approved plan; and obtain clearance for work undertaken, on an extractive site.
Standard-setting body:
NZ Motor Industry Training Organisation - NZ Extractive ITO (EXITO)
Level 7
Research and analyse a current industry issue or opportunity in Minerals Industry Risk Management
Version 2
23546 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the application of minerals industry risk management technology to a current industry issue or improvement opportunity through research and analysis. People credited with this unit standard are able to: scope a formal project for research and analysis of a minerals industry issue or improvement opportunity, and set parameters for the project; complete a literature review of the chosen industry issue or opportunity; research and analyse the industry issue or opportunity; and complete a report of the research and analysis.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Establish the risk management system at an extractive site
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 28739.
23547 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the actions taken to lead the development of, manage and coordinate the risk management system for a mine. People credited with this unit standard are able to: establish the risk management system for an extractive site; establish processes to support the risk management system; implement the risk management system; audit risk management system and processes; and complete records and reports.
Standard-setting body:
Establish and maintain the Occupational Health and Safety management system at an extractive site
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 28740.
23548 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the establishment and management of the Occupational Health and Safety management system in a mining organisation. Its application is to ensure the workplace is, as far as is reasonably achievable, safe and without risks to the health of employees. People credited with this unit standard are able to establish and maintain: the framework for the Occupational Health and Safety management system for an extractive site; participative arrangements for the management of the Occupational Health and Safety management system; procedures for assessing Occupational Health and Safety hazards; procedures for identifying Occupational Health and Safety risk; procedures for treating Occupational Health and Safety risks; organisational procedures for dealing with hazardous Occupational Health and Safety events; an Occupational Health and Safety training programme; and a system for Occupational Health and Safety records. They are also able to evaluate the organisation's Occupational Health and Safety Management System and related policies, procedures and programmes.
Standard-setting body:
Establish and maintain the environmental management system at an extractive site
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 28741.
23549 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the establishment and management of the environmental management system in a mining organisation. People credited with this unit standard are able to establish and maintain: the framework for the Environmental Management System for an extractive site; participative arrangements for the management of the environmental system; procedures for assessing environmental hazards; procedures for assessing environmental risk; procedures for treating environmental risks; organisational procedures for dealing with hazardous environmental events; an environmental training programme; and a system for environmental records. They are also able to evaluate the organisation's Environmental Management System and related policies, procedures and programmes.
Standard-setting body:
Manage the mine ventilation system at an extractive site
Version 3
23550 Unit Standard 30 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the development and management of the operation and maintenance of a mine ventilation system. People credited with this unit standard are able to: identify, analyse, and evaluate hazards and risks associated with the current mine ventilation system, and ventilation control options and measures; develop and maintain the Ventilation Principal Control Plan in accordance with the Health and Safety at Work (Mining Operations and Quarrying Operations) Regulations 2016; implement mine ventilation monitoring, recording, and reporting systems in accordance with the Health and Safety at Work (Mining Operations and Quarrying Operations) Regulations 2016; coordinate and control the maintenance of and changes to the mine ventilation system and ventilation control devices; and audit and review the effectiveness of the mine ventilation system and ventilation control devices in accordance with the Health and Safety at Work (Mining Operations and Quarrying Operations) Regulations 2016 and the Ventilation Principal Control Plan.
Consent & Moderation Requirements:
CMR 114
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2024-05-07 23:01:06.51