Domain - Electricity Supply - Power System Maintenance

Domain - Electricity Supply - Power System Maintenance

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Engineering and Technology > Electricity Supply > Electricity Supply - Power System Maintenance

Qualifications

No qualifications currently registered at this level. Also check fields and sub-fields.

Assessment Standards

Show education organisations, CMR & purpose  »

Level 2
18278 Unit Service battery banks in the electricity supply environment
This standard has expired and is no longer available.
2 Credits
32388 Unit Describe wind turbines and their components
6 Credits
Word  PDF
32389 Unit Demonstrate knowledge of electrical, mechanical and hydraulic systems used in a wind turbine
6 Credits
Word  PDF
Level 3
10394 Unit Service compressed air systems
This standard has expired and is no longer available.
3 Credits
10396 Unit Service cooling systems
This standard has expired and is no longer available.
3 Credits
10399 Unit Service fans
This standard has expired and is no longer available.
3 Credits
10407 Unit Service hydro control valves of 450mm diameter and above
This standard has expired and is no longer available.
3 Credits
10409 Unit Service condensing plant
This standard has expired and is no longer available.
3 Credits
10413 Unit Service pumps and components in electricity supply power plants
This standard is expiring. The last date for assessment to take place is 31 December 2022.
3 Credits
Word  PDF
10419 Unit Service valves up to 450mm diameter
This standard has expired and is no longer available.
3 Credits
10421 Unit Service water turbines in electricity supply power plants
This standard has expired and is no longer available.
6 Credits
10423 Unit Service water turbine governor and relief valve systems
This standard has expired and is no longer available.
6 Credits
14328 Unit Carry out an inspection of substation equipment
4 Credits
Word  PDF
14330 Unit Install substation earthing and bonding system
This standard is expiring. The last date for assessment to take place is 31 December 2022.
3 Credits
Word  PDF
14331 Unit Carry out safety and operational inspection checks on substation auxiliary plant and equipment
4 Credits
Word  PDF
14335 Unit Service and repair high voltage disconnectors, earth switches and other bus structure equipment
This standard has expired and is no longer available.
6 Credits
14339 Unit Carry out routine inspection and servicing on 11kV and 33kV pole mounted re-closer circuit breakers
This standard has expired and is no longer available.
3 Credits
14344 Unit Carry out routine inspection and servicing on substation emergency services
This standard has expired and is no longer available.
4 Credits
14345 Unit Carry out routine inspection and servicing on substation air compressor systems
This standard has expired and is no longer available.
4 Credits
14346 Unit Carry out routine inspection and servicing on security services at substations
This standard has expired and is no longer available.
4 Credits
14347 Unit Carry out routine inspection and service of high voltage capacitor banks and signal injection plant
This standard has expired and is no longer available.
3 Credits
14700 Unit Apply and remove safety measures in an electricity supply environment
3 Credits
Word  PDF
28895 Unit Maintain substation earthing and bonding
3 Credits
Word  PDF
32390 Unit Demonstrate knowledge of safety in a wind farm environment
5 Credits
Word  PDF
32391 Unit Demonstrate knowledge of electrical systems in a wind turbine
5 Credits
Word  PDF
32392 Unit Demonstrate knowledge of mechanical systems in a wind turbine
5 Credits
Word  PDF
32393 Unit Demonstrate knowledge of hydraulic systems in a wind turbine
5 Credits
Word  PDF
32394 Unit Maintain an electrical system in a wind turbine
15 Credits
Word  PDF
32395 Unit Maintain mechanical and hydraulic systems in a wind turbine
20 Credits
Word  PDF
6974 Unit Service bearings of rotating machines of 100kVA and above
This standard has expired and is no longer available.
3 Credits
6981 Unit Service hydro control gates and associated equipment
This standard has expired and is no longer available.
4 Credits
6983 Unit Service lubrication systems for rotating machines of 100kVA and above
This standard has expired and is no longer available.
3 Credits
Level 4
10395 Unit Repair and overhaul compressed air systems
This standard is expiring. The last date for assessment to take place is 31 December 2022.
5 Credits
Word  PDF
10397 Unit Repair and overhaul cooling systems
This standard is expiring. The last date for assessment to take place is 31 December 2022.
5 Credits
Word  PDF
10400 Unit Repair and overhaul fans
This standard has expired and is no longer available.
5 Credits
10401 Unit Service gas turbines
This standard has expired and is no longer available.
8 Credits
10405 Unit Service geothermal energy production and transportation plant
This standard has expired and is no longer available.
10 Credits
10408 Unit Repair and overhaul hydro control valves of 450mm diameter and above
This standard has expired and is no longer available.
5 Credits
10410 Unit Repair and overhaul condensing plant
This standard has expired and is no longer available.
5 Credits
10411 Unit Service low voltage electric motors 415 volts and below
This standard has expired and is no longer available.
5 Credits
10415 Unit Service steam turbine governor
This standard has expired and is no longer available.
8 Credits
10417 Unit Service steam turbines
This standard has expired and is no longer available.
5 Credits
10420 Unit Repair and overhaul valves
This standard has expired and is no longer available.
5 Credits
14329 Unit Carry out routine inspection and servicing on distribution power transformers 33kV to 11kV
This standard has expired and is no longer available.
8 Credits
14332 Unit Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
This standard has expired and is no longer available.
8 Credits
14333 Unit Carry out routine inspection and servicing on transmission power transformers above 33kV
This standard has expired and is no longer available.
8 Credits
14334 Unit Carry out routine service on transmission instrument transformers 33kV and above
This standard has expired and is no longer available.
7 Credits
14336 Unit Carry out routine inspection and servicing on distribution instrument transformers below 33kV
This standard has expired and is no longer available.
7 Credits
14337 Unit Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
This standard has expired and is no longer available.
6 Credits
14338 Unit Carry out routine inspection and servicing on high voltage bulk oil circuit breakers
This standard has expired and is no longer available.
6 Credits
14340 Unit Carry out routine inspection and servicing on high voltage air blast circuit breakers
This standard has expired and is no longer available.
4 Credits
14341 Unit Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus
This standard has expired and is no longer available.
4 Credits
14342 Unit Carry out routine inspection and minor servicing on high voltage SF6 outdoor circuit breakers
This standard has expired and is no longer available.
5 Credits
14343 Unit Carry out routine inspection and servicing on high voltage gas insulated switchgear
This standard has expired and is no longer available.
5 Credits
14701 Unit Manage electricity supply work control systems
This standard has expired and is no longer available.
4 Credits
15156 Unit Conduct hydraulic structures safety and surveillance inspections
This standard has expired and is no longer available.
4 Credits
15563 Unit Repair, set up and overhaul coal and ash handling plant
This standard has expired and is no longer available.
15 Credits
15564 Unit Service and repair water treatment plant process equipment
This standard has expired and is no longer available.
3 Credits
17633 Unit Conduct an electrical service on ac generators of 100kVA and above
This standard has expired and is no longer available.
7 Credits
17634 Unit Conduct a mechanical service on ac generators of 100kVA and above
This standard has expired and is no longer available.
7 Credits
17635 Unit Isolate and restore electricity generation plant and equipment
This standard has expired and is no longer available.
5 Credits
21228 Unit Demonstrate and apply knowledge of dynamic balancing fundamentals
This standard has expired and is no longer available.
12 Credits
24669 Unit Carry out routine inspection and service of high voltage static var compensation (SVC) equipment
This standard has expired and is no longer available.
5 Credits
26019 Unit Demonstrate knowledge of introductory concepts in power system protection
This standard has expired and is no longer available.
10 Credits
27655 Unit Demonstrate knowledge of faults, relay systems, and components of diagrams in power system protection systems
4 Credits
Word  PDF
28886 Unit Demonstrate knowledge of power transformers used in substations
This standard is expiring. The last date for assessment to take place is 31 December 2022.
3 Credits
Word  PDF
28887 Unit Demonstrate knowledge of disconnectors and earth switches used in substations
This standard is expiring. The last date for assessment to take place is 31 December 2022.
7 Credits
Word  PDF
28888 Unit Demonstrate knowledge of substation structures, insulators, conductors and bus hardware
This standard is expiring. The last date for assessment to take place is 31 December 2022.
7 Credits
Word  PDF
28889 Unit Demonstrate knowledge of cables and specialist substation equipment
This standard is expiring. The last date for assessment to take place is 31 December 2022.
7 Credits
Word  PDF
28890 Unit Demonstrate knowledge of sampling, testing, treatment and spill management of substation insulating and hydraulic oils
This standard is expiring. The last date for assessment to take place is 31 December 2022.
5 Credits
Word  PDF
28891 Unit Demonstrate knowledge of instrument transformers used in substations
This standard is expiring. The last date for assessment to take place is 31 December 2022.
5 Credits
Word  PDF
28892 Unit Demonstrate knowledge of circuit breakers and auto reclosers used in substations
This standard is expiring. The last date for assessment to take place is 31 December 2022.
7 Credits
Word  PDF
30812 Unit Demonstrate knowledge of sensor types used on wind generation equipment
This standard is expiring. The last date for assessment to take place is 31 December 2022.
10 Credits
Word  PDF
30813 Unit Carry out fault finding and maintenance of generation plant and auxiliary equipment used in wind turbines
This standard is expiring. The last date for assessment to take place is 31 December 2022.
15 Credits
Word  PDF
30814 Unit Carry out fault finding and maintenance of mechanical systems used in wind turbines
This standard is expiring. The last date for assessment to take place is 31 December 2022.
15 Credits
Word  PDF
30815 Unit Demonstrate knowledge of wind turbine power control systems, and hazards associated with wind turbine installations
This standard is expiring. The last date for assessment to take place is 31 December 2022.
15 Credits
Word  PDF
30816 Unit Demonstrate knowledge of hydraulics used in wind turbines
This standard is expiring. The last date for assessment to take place is 31 December 2022.
15 Credits
Word  PDF
32057 Unit Carry out routine inspection and service of a power transformer
6 Credits
Word  PDF
32058 Unit Carry out routine inspection and service on a high voltage circuit breaker
6 Credits
Word  PDF
32060 Unit Install and inspect an earthing and bonding system for equipment used in the electricity supply industry
3 Credits
Word  PDF
32396 Unit Demonstrate knowledge of procedures for the installation of a wind turbine
10 Credits
Word  PDF
32397 Unit Diagnose and repair faults in an electrical system used in wind turbines
15 Credits
Word  PDF
32398 Unit Diagnose and repair faults in mechanical and hydraulic systems used in wind turbines
20 Credits
Word  PDF
32399 Unit Demonstrate knowledge of maintenance and reliability of wind turbines
10 Credits
Word  PDF
32400 Unit Demonstrate knowledge of faults, fault diagnosis and testing in wind turbines
10 Credits
Word  PDF
32401 Unit Demonstrate knowledge of wind turbine systems and process safety in a wind farm environment
15 Credits
Word  PDF
6975 Unit Repair and overhaul bearings of rotating machines of 100kVA and above
This standard has expired and is no longer available.
8 Credits
6976 Unit Service excitation systems for ac synchronous generators of 100kVA and above
This standard has expired and is no longer available.
5 Credits
6982 Unit Repair and overhaul hydro control gates and associated equipment
This standard has expired and is no longer available.
7 Credits
6984 Unit Repair and overhaul lubrication systems for rotating plant of 100kVA and over
This standard has expired and is no longer available.
5 Credits
6986 Unit Repair and overhaul high voltage switchgear
This standard has expired and is no longer available.
10 Credits
Level 5
10398 Unit Repair and overhaul electrical control, instrumentation, and indication systems
This standard has expired and is no longer available.
15 Credits
10402 Unit Conduct shop inspections and repairs on free turbines
This standard has expired and is no longer available.
15 Credits
10403 Unit Service generator compensator hydrogen cooling and seal oil systems
This standard has expired and is no longer available.
8 Credits
10406 Unit Repair and overhaul geothermal energy production and transportation plant
This standard has expired and is no longer available.
15 Credits
10412 Unit Repair and overhaul low voltage electric motors 415 volts and below
This standard has expired and is no longer available.
8 Credits
10414 Unit Repair and overhaul pumps
This standard is expiring. The last date for assessment to take place is 31 December 2022.
8 Credits
Word  PDF
10416 Unit Repair and overhaul steam turbine governor
This standard has expired and is no longer available.
15 Credits
10418 Unit Repair and overhaul steam turbines
This standard has expired and is no longer available.
20 Credits
10422 Unit Repair and overhaul water turbines
This standard has expired and is no longer available.
15 Credits
10424 Unit Repair and overhaul water turbine governor and relief valve systems
This standard has expired and is no longer available.
15 Credits
15565 Unit Repair and calibrate water treatment plant analysis and process control equipment
This standard has expired and is no longer available.
10 Credits
21229 Unit Carry out advanced dynamic balancing
This standard has expired and is no longer available.
12 Credits
21230 Unit Describe advanced power system protection schemes
This standard has expired and is no longer available.
6 Credits
26020 Unit Demonstrate knowledge of intermediate concepts in power system protection
This standard has expired and is no longer available.
10 Credits
29731 Unit Demonstrate knowledge of power protection and control networks
15 Credits
Word  PDF
29732 Unit Demonstrate knowledge of electrical principles in power engineering
15 Credits
Word  PDF
29733 Unit Demonstrate knowledge of power engineering
15 Credits
Word  PDF
29734 Unit Demonstrate knowledge of power engineering mathematics
15 Credits
Word  PDF
29737 Unit Carry out acceptance, commissioning and maintenance tests on electricity supply plant and equipment
20 Credits
Word  PDF
29738 Unit Plan, install, and test electrical installation wiring and equipment
15 Credits
Word  PDF
29739 Unit Demonstrate knowledge of the Electricity Act, circuit protection and compliance testing of works or installations
10 Credits
Word  PDF
29742 Unit Demonstrate knowledge of electrical machines in power engineering
15 Credits
Word  PDF
29743 Unit Demonstrate knowledge of electronics in power engineering
15 Credits
Word  PDF
29744 Unit Demonstrate knowledge of data communications in power engineering
15 Credits
Word  PDF
29745 Unit Demonstrate knowledge of routing and switching essentials in power engineering
15 Credits
Word  PDF
29746 Unit Demonstrate and apply knowledge of excitation systems on electrical machines
6 Credits
Word  PDF
29747 Unit Demonstrate knowledge of transmission and distribution network engineering
15 Credits
Word  PDF
6977 Unit Repair and overhaul excitation systems for ac synchronous generators of 100kVA and above
This standard has expired and is no longer available.
12 Credits
6978 Unit Service and repair protection systems for rotating machines of 100kVA and above
This standard has expired and is no longer available.
15 Credits
6980 Unit Repair and overhaul ac generators of 100kVA and above
This standard has expired and is no longer available.
20 Credits
6985 Unit Repair and overhaul power transformers of 5kVA and above
This standard has expired and is no longer available.
10 Credits
Level 6
10404 Unit Repair and overhaul generator compensator hydrogen cooling and seal oil systems
This standard has expired and is no longer available.
20 Credits
26021 Unit Demonstrate knowledge of advanced concepts in power system protection
This standard has expired and is no longer available.
15 Credits
29735 Unit Demonstrate knowledge of electrical power system engineering
15 Credits
Word  PDF
29736 Unit Demonstrate and apply knowledge of power system protection in the electricity supply industry
15 Credits
Word  PDF
29748 Unit Demonstrate and apply knowledge of complex power protection engineering
12 Credits
Word  PDF