Domain - Aircraft Powerplant Repair and Overhaul
TOP > Engineering and Technology > Aeronautical Engineering > Aircraft Powerplant Repair and Overhaul
| 0 Qualifications | 24 Assessment Standards (24 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Balance aeronautical rotating assemblies
Version 7
3402 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to balance aeronautical rotating assemblies; balance aeronautical rotating assembly components; and complete the balancing task.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Demonstrate knowledge of aircraft powerplant repair and overhaul practices
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 28137 and unit standard 28143.
7240 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This is a knowledge-based unit standard for people pursuing unit standards in the aircraft powerplant repair and overhaul domain. People credited with this unit standard are able to: demonstrate knowledge of aircraft propeller repair and overhaul practices; aircraft gas turbine engine repair and overhaul practices; aircraft reciprocating engine repair and overhaul practices; aircraft gearbox and transmission repair and overhaul practices; and aircraft powerplant handling practices.
Standard-setting body:
Level 4
Install, operate, and remove aircraft powerplants from a test bed
Version 4 This unit standard, unit standard 20635, unit standard 20636, and unit standard 20637 replaced unit standard 3425.
23160 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare aircraft powerplants for operation on a test bed; test aircraft powerplants; and remove aircraft powerplants from a test bed and complete finishing activities related to the testing tasks.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gas turbine compressor sections
Version 4 This unit standard, unit standard 23162, unit standard 23163, and unit standard 23164 replaced unit standard 3423.
23161 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gas turbine compressor sections; locate defects in aircraft gas turbine compressor sections; repair or overhaul aircraft gas turbine compressor section components; and complete the repair or overhaul task for aircraft gas turbine compressor sections.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gas turbine combustion sections
Version 4 This unit standard, unit standard 23161, unit standard 23163, and unit standard 23164 replaced unit standard 3423.
23162 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gas turbine combustion sections; locate defects in aircraft gas turbine combustion sections; repair or overhaul aircraft gas turbine combustion section components; and complete the repair or overhaul task for aircraft gas turbine combustion sections.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft powerplant turbine sections
Version 4 This unit standard, unit standard 23161, unit standard 23162, and unit standard 23164 replaced unit standard 3423.
23163 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft powerplant turbine sections; locate defects in aircraft powerplant turbine sections; repair or overhaul aircraft powerplant turbine section components; and complete the repair or overhaul task for aircraft powerplant turbine sections.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Disassemble and assemble aircraft gas turbine engines
Version 4 This unit standard, unit standard 23161, unit standard 23162, and unit standard 23163, replaced unit standard 3423.
23164 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to disassemble and assemble aircraft gas turbine engines; disassemble aircraft gas turbine engines; assemble aircraft gas turbine engines; and complete the disassembly and assembly tasks for aircraft gas turbine engines.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Demonstrate knowledge of aircraft gas turbine powerplant repair and overhaul practices
Version 3 This unit standard and unit standard 28143 replaced unit standard 7240.
28137 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This is a knowledge-based unit standard for people pursuing standards in the aircraft powerplant repair and overhaul domain. People credited with this unit standard are able to demonstrate knowledge of: aircraft propeller repair and overhaul practices; aircraft gas turbine engine repair and overhaul practices; aircraft gearbox and transmission repair and overhaul practices; and aircraft gas turbine powerplant handling practices.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Demonstrate knowledge of aircraft reciprocating powerplant repair and overhaul practices
Version 3 This unit standard and unit standard 28137 replaced unit standard 7240.
28143 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This is a knowledge-based unit standard for people pursuing unit standards in the aircraft powerplant repair and overhaul domain. People credited with this unit standard are able to demonstrate knowledge of: aircraft propeller repair and overhaul practices; aircraft reciprocating engine repair and overhaul practices; aircraft gearbox and transmission repair and overhaul practices; and aircraft reciprocating powerplant handling practices.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft fixed pitch propeller assemblies
Version 7
3414 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft fixed pitch propeller assemblies; locate defects in aircraft fixed pitch propeller assemblies; repair or overhaul aircraft fixed pitch propeller assemblies; test and adjust aircraft fixed pitch propeller assemblies; and complete the repair or overhaul task for aircraft fixed pitch propeller assemblies.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gas turbine engine fuel system components
Version 7
3415 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gas turbine engine fuel system components; locate defects in aircraft gas turbine fuel system components; repair or overhaul aircraft gas turbine fuel system components; test and adjust aircraft gas turbine fuel system components; and complete the repair or overhaul task for aircraft gas turbine fuel system components.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft reciprocating engine fuel system components
Version 7
3416 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft reciprocating engine fuel system components; locate defects in aircraft reciprocating engine fuel system components; repair or overhaul aircraft reciprocating engine fuel system components; test and adjust aircraft reciprocating engine fuel system components; and complete the repair or overhaul task for aircraft reciprocating engine fuel system components.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gas turbine engine fuel control units
Version 7
3417 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gas turbine engine fuel control units; locate defects in aircraft gas turbine engine fuel control units; repair or overhaul aircraft gas turbine engine fuel control unit components; test and adjust aircraft gas turbine engine fuel control unit components; and complete the repair or overhaul tasks for aircraft gas turbine engine fuel control units.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gearboxes and transmission components
Version 7
3418 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gearboxes and transmission components; locate defects in aircraft gearboxes and transmission components; repair or overhaul aircraft gearboxes and transmission components; test and adjust aircraft gearboxes and transmission components; and complete the repair or overhaul task for aircraft gearboxes and transmission components.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft engine lubrication system components
Version 7
3419 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft engine lubrication system components; locate defects in aircraft engine lubrication system components; repair or overhaul aircraft engine lubrication system components; test and adjust aircraft engine lubrication system components; and complete the repair or overhaul task for aircraft engine lubrication system components.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft reciprocating engines
Version 7
3420 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft reciprocating engines; locate defects in aircraft reciprocating engines; repair or overhaul aircraft reciprocating engine components; test and adjust aircraft reciprocating engine components; and complete the repair or overhaul task for aircraft reciprocating engines.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gas turbine engine power augmentation or restoration system components
Version 7
3421 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gas turbine engine power augmentation or restoration system components; locate defects in aircraft gas turbine engine power augmentation or restoration system components; repair or overhaul aircraft gas turbine engine power augmentation or restoration system components; test and adjust aircraft gas turbine engine power augmentation or restoration system components; and complete the repair or overhaul task for aircraft gas turbine engine power augmentation or restoration system components.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair or overhaul aircraft gas turbine engine thrust reverser system components
Version 7
3422 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft gas turbine engine thrust reverser system components; locate defects in aircraft gas turbine engine thrust reverser system components; repair or overhaul aircraft gas turbine engine thrust reverser system components; test and adjust aircraft gas turbine engine thrust reverser system components; and complete the repair or overhaul task for aircraft gas turbine engine thrust reverser system components.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair and/or overhaul aircraft gas turbine engines
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 23161, unit standard 23162, unit standard 23163, and unit standard 23164.
3423 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to return aircraft gas turbine engines (intake, compressor, combustion, turbine, exhaust, lubrication system, and accessory gearbox components) to a serviceable condition by disassembling, locating defects, repairing, modifying or replacing parts, and reassembling. Repair and overhaul activities are usually carried out in a specialist bay or workshop.
Standard-setting body:
Repair or overhaul aircraft variable pitch propeller assemblies
Version 7
3424 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or overhaul aircraft variable pitch propeller assemblies; locate defects in aircraft variable pitch propeller assemblies; repair or overhaul aircraft variable pitch propeller assemblies; test and adjust aircraft variable pitch propeller assemblies; and complete the repair or overhaul task for aircraft variable pitch propeller assemblies.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Test aircraft engines on a test bed
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 23160, unit standard 20635, unit standard 20636, and unit standard 20637.
3425 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to test aircraft engines on a test bed and rectify typical defects such as vibrations, performance parameters, and leaks.
Standard-setting body:
Level 5
Test aircraft reciprocating powerplants on a test bed
Version 4 This unit standard, unit standard 20636, unit standard 20637, and unit standard 23160 replaced unit standard 3425.
20635 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare aircraft reciprocating powerplants for testing on a test bed; test aircraft reciprocating powerplants; and complete finishing activities related to the testing tasks.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Test aircraft turbo-prop or turbo-shaft powerplants on a test bed
Version 4 This unit standard, unit standard 20635, unit standard 20637, and unit standard 23160 replaced unit standard 3425.
20636 Unit Standard 24 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare aircraft turbo-prop or turbo-shaft powerplants for testing on a test bed; test aircraft turbo-prop or turbo-shaft powerplants; and complete finishing activities related to the testing tasks.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Test aircraft turbo-fan or turbo-jet powerplants on a test bed
Version 4 This unit standard, unit standard 20635, unit standard 20636, and unit standard 23160 replaced unit standard 3425.
20637 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare aircraft turbo-fan or turbo-jet powerplants for testing on a test bed; test aircraft turbo-fan or turbo-jet powerplants; and complete finishing activities related to the testing tasks.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Data as at 2025-05-01 23:01:07.45