Domain - Industrial Measurement and Control - Maintenance
TOP > Engineering and Technology > Industrial Measurement and Control > Industrial Measurement and Control - Maintenance
| 0 Qualifications | 37 Assessment Standards (27 Units & 10 Skills) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Maintain level measurement devices used in industry
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8 This unit standard was replaced by skill standard 40239.
2633 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - reconfigure or calibrate a pressure measurement device used for level measurement; - calibrate or reconfigure a level measurement system; and - service level measurement devices.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain flow measurement devices used in industry
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8 This unit standard was replaced by skill standard 40241.
2637 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate or configure flow measurement transmitters and devices; and - service flow measurement transmitters and devices.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain control valve actuators and positioners
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2640 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - stroke-check control valve actuators and calibrate positioners; and - service control valve actuators and positioners.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain signal conditioning equipment, recorder, and alarm module
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2656 have been replaced by unit standard 24884.
2651 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: calibrate signal conditioning equipment and a recorder; and maintain signal conditioning equipment and an alarm module.
Standard-setting body:
Maintain hydraulic or electro-hydraulic equipment
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2664 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard covers installation and maintenance of hydraulic equipment used in industrial process control applications. This knowledge may for example, be used in the commissioning of hydraulic equipment connected to a programmable logic controller. People credited with this unit standard are able to: - install hydraulic or electro-hydraulic equipment; - test and calibrate hydraulic or electro-hydraulic equipment; and - service hydraulic or electro-hydraulic equipment.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Install and service pneumatic or electro-pneumatic equipment
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8 This unit standard was replaced by skill standard 40235.
2667 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - install pneumatic or electro-pneumatic equipment; - test pneumatic or electro-pneumatic equipment; and - service pneumatic or electro-pneumatic equipment.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Level 4
Maintain conditioning modules and electronic or microprocessor based controllers
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 4 This unit standard replaced unit standard 2651 and unit standard 2656.
24884 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - reconfigure or calibrate signal conditioning modules; - configure and test an electronic or microprocessor based controller; - service signal conditioning modules; and - service an electronic or microprocessor based controller.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain pressure measurement devices
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8 This unit standard was replaced by skill standard 40238.
2631 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - reconfigure or calibrate pressure measurement devices; and - service and test pressure measurement devices and systems.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain temperature measurement devices used in industry
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8 This unit standard was replaced by skill standard 40240.
2635 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - reconfigure or calibrate temperature measurement devices; - service and test temperature measurement devices and systems.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain and service control valves in accordance with industry requirements
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2639 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: maintain and service control valves in accordance with industry requirements.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain a pH measuring system for chemical analysis
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2642 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate a pH measuring system in accordance with industry requirements; and - verify operation of pH measuring system is correct and service in accordance with industry requirements.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain a conductivity measuring system
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2643 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate a conductivity measuring system in accordance with industry requirements; and - service a conductivity measuring system in accordance with industry requirements.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain a dissolved oxygen measuring system
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2644 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate a dissolved oxygen measuring system; and - maintain and service a dissolved oxygen measuring system.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain a consistency or a viscosity measuring system
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2645 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate a consistency or a viscosity measuring system; and - maintain operation of and service a consistency or a viscosity measuring system.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain analytical monitoring equipment
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2646 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate analytical exhaust monitoring equipment; and - service analytical exhaust monitoring equipment.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain humidity or dewpoint monitoring equipment
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2647 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate humidity or dewpoint monitoring equipment; and - maintain and repair humidity or dewpoint monitoring equipment.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain and calibrate density monitoring equipment
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2648 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate density measuring devices; and - maintain density measuring devices.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain smart instruments and loops used in industry
This standard has expired and is no longer available.
Version 6
2652 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to calibrate and maintain smart instruments and loops used in industry.
Standard-setting body:
Maintain electronic or microprocessor based controllers
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2651 have been replaced by unit standard 24884.
2656 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to calibrate, and maintain and repair an electronic or microprocessor based controller.
Standard-setting body:
Maintain pneumatic controllers
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
2657 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate a pneumatic controller; and - maintain and repair a pneumatic controller.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Install, test, and service pneumatic or electro-pneumatic equipment
Version 1
40235 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Diagnose and correct faults in industrial systems
Version 1
40236 Skill Standard 20 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Test a PID controller and analyse control loops
Version 1
40237 Skill Standard 5 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain pressure measuring instruments
Version 1
40238 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain level measuring instruments
Version 1
40239 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain temperature measuring instruments
Version 1
40240 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain flow measuring instruments
Version 1
40241 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain actuators and positioners in an industrial context
Version 1
40242 Skill Standard 4 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain analytical measuring equipment in an industrial context
Version 1
40243 Skill Standard 8 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain final controlling elements in an industrial context
Version 1
40244 Skill Standard 4 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain chromatographs
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
4356 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - calibrate chromatographs; and - maintain and repair chromatographs.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Tune or adjust a plant control loop
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 8
4357 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard covers tuning and adjustment of plant control loops and complements Unit 2655, Tune control loops, and proves competence in tuning or adjusting a real plant control loop. People credited with this unit standard are able to: - tune or adjust a plant control loop.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Level 5
Demonstrate knowledge of the operation, measurement, and control of an industrial process
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 4
19233 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. Candidates who have achieved this unit standard can apply their knowledge in a practical application. People credited with this unit standard are able to demonstrate and apply knowledge of the: - operation of an industrial process; and - measurement and control of an industrial process.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Diagnose and correct faults in industrial measurement and control systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 5 This unit standard was replaced by skill standard 40236.
19234 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - describe common faults in measurement and control systems; - perform initial assessment of fault symptoms; - minimise consequences of fault and repair procedures in measurement and control systems; - locate and correct faults in measurement and control systems; and - update plant records for measurement and control systems following fault correction.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Maintain and manage specialist analytical equipment used in industrial processes
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 4
19235 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. It covers maintenance and management of specialist analytical equipment such as spectrophotometers, mass spectrometers, chemiluminescence analysers, and chromatographs, or analytical equipment of similar complexity. People credited with this unit standard are able to: - calibrate specialist analytical equipment; - specify and maintain sample processing system associated with specialist analytical equipment; - diagnose and correct faults in specialist analytical equipment; - carry out routine maintenance procedures on specialist analytical equipment; and - manage maintenance of specialist analytical equipment.
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Configure, test, and commission a distributed control system
This standard has expired and is no longer available.
Version 2
19236 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated ability to: - plan configuration of a distributed control system to implement a specified control scheme; - implement configuration of a distributed control system; - test and commission the configuration of a distributed control system; and - document the configuration of a distributed control system.
Standard-setting body:
Maintain complex control systems
This standard has expired and is no longer available.
Version 2
19237 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated ability to: - calibrate and adjust complex control systems; - perform routine maintenance on complex control systems; - diagnose and correct faults in complex control systems; and - prepare maintenance procedures for complex control systems.
Standard-setting body:
Data as at 2025-05-01 23:01:07.45