Domain - Industrial Measurement and Control - Theory
TOP > Engineering and Technology > Industrial Measurement and Control > Industrial Measurement and Control - Theory
| 0 Qualifications | 52 Assessment Standards (52 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Prepare and interpret diagrams for instrumentation and control systems
Version 3
24888 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard covers drawing and interpreting diagrams used to document the operation and connection of instrumentation and control systems. People credited with this unit standard are able to: - prepare diagrams of industrial measurement and control systems; and; - interpret diagrams of industrial measurement and control systems.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of pressure measurement systems used in industry
Version 7
2630 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of pressure measurement devices; - describe pressure calibration equipment; - calibrate pressure transmitters and gauges; and - describe methods of pressure instrument installation.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of level measurement systems used in industry
Version 7
2632 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of pressure measurement devices used for level measurement; - calibrate level measurement devices; and - demonstrate knowledge of calibration methods for a level measurement system.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of temperature measurement systems used in industry
Version 7
2634 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of temperature measurement devices; - describe calibration equipment used for temperature transmitters, elements, and indicators; - determine characteristics and calibrate temperature measurement devices; and - describe methods of temperature instrument installation.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of flow measurement systems used in industry
Version 7
2636 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of flow measuring devices; - describe flowmeter calibration check procedures; - plot flowmeter and associated equipment characteristic graphs; and - demonstrate knowledge of methods of flowmeter installation.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of control valves, actuators, and positioners
Version 7
2638 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: - control valves; - control valve sizing for liquid flow; - valve actuators; and - valve positioners.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of strain gauges and weighing systems
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2659 have been replaced by unit standard 28082.
2653 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: . strain gauge theory; . weighing systems; and . weighing system calibration methods.
Standard-setting body:
Demonstrate knowledge of transducers and their applications in industrial measurement
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2653 have been replaced by unit standard 28082.
2659 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: . transducers and their applications in industrial measurement; and . transducer installation practice.
Standard-setting body:
Demonstrate knowledge of hydraulic control equipment used in industry
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2666 have been replaced by unit standard 28083.
2663 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is designed to provide knowledge of hydraulic equipment used in industrial process control applications. This knowledge may for example, be used in the commissioning of hydraulic equipment connected to a programmable logic controller. People credited with this unit standard are able to demonstrate knowledge of hydraulic: . servicing equipment; . circuit symbols; . control actuators; and . control valves.
Standard-setting body:
Demonstrate knowledge of instrumentation calibration terminology and standards
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 28078.
2665 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . explain terms used in instrument calibration; . define and explain calibration standards; and . define and explain requirements for calibration equipment and records.
Standard-setting body:
Demonstrate knowledge of pneumatic control equipment used in industry
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2663 have been replaced by unit standard 28083.
2666 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of pneumatic: . air service equipment; . circuit symbols; . control actuators; . control valves; . automatic control circuitry; and . logic circuit components.
Standard-setting body:
Demonstrate knowledge of flame, gas, smoke, and heat detectors
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 28081.
2668 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: . flame detectors; . gas detectors; . smoke detectors; and . heat detectors.
Standard-setting body:
Demonstrate knowledge of the physical principles of instrumentation systems
Version 2
28077 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of the physical principles of: - pressure measurement; - level measurement; - temperature measurement; - flow measurement; - density measurement.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of industrial measurement processes, standards, and calibration
Version 2 This unit standard replaced unit standard 2665.
28078 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of signal transmission used in pneumatic and electronic instruments; - explain terms used in instrument calibration; - define calibration standards; and - demonstrate knowledge of requirements for calibration equipment and records.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate and apply fundamental knowledge of digital and analogue electronics for IMC technicians
Version 2
28079 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard covers an introduction to digital and analogue electronic devices and circuits for IMC technicians. People credited with this unit standard are able to: - demonstrate knowledge of number systems used in digital electronics; - demonstrate knowledge of simple logic circuits; - demonstrate and apply knowledge of A/D and D/A conversion; - demonstrate fundamental knowledge of semiconductor switching devices and their applications; - demonstrate fundamental knowledge of operational amplifiers and their applications; and - demonstrate fundamental knowledge of d.c. power supplies and electronic regulators.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of transducers and strain gauges and their applications in industrial measurement
Version 2 This unit standard replaced unit standard 2653 and unit standard 2659.
28082 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of transducers and their applications in industrial measurement; - demonstrate knowledge of transducer installation requirements; - demonstrate knowledge of strain gauge theory; - demonstrate knowledge of load cells in weighing systems; and - describe weighing system calibration methods.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of hydraulic and pneumatic control equipment used in industrial process control applications
Version 2 This unit standard replaced unit standard 2663 and unit standard 2666.
28083 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is designed to provide knowledge of hydraulic and pneumatic equipment used in industrial process control applications. This knowledge may, for example, be used in the commissioning of hydraulic and pneumatic equipment connected to a programmable logic controller. People credited with this unit standard are able to demonstrate knowledge of: - hydraulic and pneumatic service equipment; - hydraulic and pneumatic control actuators; - hydraulic and pneumatic control valves; - hydraulic and pneumatic circuit symbols and automatic control circuitry; and - pneumatic logic circuit components.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Level 4
Describe and apply process science concepts
This standard has expired and is no longer available.
Version 2
17036 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe given concepts in process science in the context of industrial control, and apply process science in given industrial control applications.
Standard-setting body:
Demonstrate and apply knowledge of electronic configurable instruments and loops used in industry
Version 3 This unit standard replaced unit standard 2650 and unit standard 2652.
24886 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of electronic configurable instruments used in industry; and - configure industrial instruments and demonstrate knowledge of the requirements for calibration and trim adjustments.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of electronic variable speed drives
Version 3
24887 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: - electronic VSDs; - VSD applications; and - installation and commissioning requirements of VSDs.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of analytical measurement systems
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 28080 and unit standard 28081.
2641 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: . pH measurement; . conductivity measurement; . dissolved oxygen measuring equipment; . stack and/or particulate monitoring equipment; . chromatography measuring equipment; . consistency and viscosity measuring equipment; . humidity measuring equipment; . density measuring equipment; and . analytical sampling systems.
Standard-setting body:
Demonstrate knowledge of signal conditioners, trending recorders, and alarm systems
Version 7
2649 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard covers signal conditioning equipment, recorders, and alarm systems. However, it excludes transmitters and controllers. People credited with this unit standard are able to demonstrate knowledge of: - analogue signal conditioners; - trending recorders; and - alarm systems.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate an understanding of smart instruments and loops used in industry
This standard has expired and is no longer available.
Version 6
2650 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate an understanding of smart instruments and loops used in industry.
Standard-setting body:
Demonstrate knowledge of on/off and proportional integral derivative mode control theory and controllers
Version 7
2654 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: - on/off and proportional integral derivative (PID) control theory; - on/off and PID controllers; and - control loop drawings.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Tune control loops
Version 7
2655 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of tuning of control loops; - tune control loops; and - demonstrate knowledge of control loop wiring.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of advanced control loop methods
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2661 have been replaced by unit standard 28076.
2660 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . demonstrate knowledge of advanced control loop methods.
Standard-setting body:
Configure and tune advanced control loops
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2660 have been replaced by unit standard 28076.
2661 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: . configure advanced control loops; and . tune advanced control loops.
Standard-setting body:
Demonstrate knowledge of distributed control systems
Version 7
2662 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: - distributed control systems; and - signal transmission used in distributed control systems.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate and apply knowledge of advanced control loop methods
Version 2 This unit standard replaced unit standard 2660 and unit standard 2661.
28076 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: - demonstrate knowledge of advanced control loop methods; - configure advanced control loops; and - tune advanced control loops.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of liquid analytical measurement systems
Version 2 This unit standard and unit standard 28081 replaced unit standard 2641.
28080 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard covers principles of industrial liquid analytical measurements and the operation of systems used to perform the measurements. People credited with this unit standard are able to demonstrate knowledge of: - pH measurement; - conductivity measurement; - dissolved oxygen measurement; - consistency and viscosity measurement; - density measurement; and - analytical sampling systems.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of gas analytical measurement and flame, gas, smoke, and heat detection
Version 2 This unit standard and unit standard 28080 replaced unit standard 2641. This unit standard replaced unit standard 2668.
28081 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers principles of industrial gas analytical measurements and detection and the operation of systems used to perform the measurements. People credited with this unit standard are able to demonstrate knowledge of: - stack and/or particulate monitoring and measurement; - chromatography measurement; - humidity measurement; - analytical sampling systems; - flame detectors; - gas detectors; - smoke detectors; and - heat detectors.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Level 5
Describe and apply control technology
This standard has expired and is no longer available.
Version 3
11562 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the given concepts in control technology, and apply control technology in given applications. This unit standard applies to a person in a technician type of role and represents the cognitive capability needed in terms of knowledge and application of control technology.
Standard-setting body:
Describe and apply instrumentation technology
This standard has expired and is no longer available.
Version 3
11563 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the given concepts in instrumentation technology, and apply instrumentation technology in given applications. This unit standard applies to a person in a technician type of role and represents the cognitive capability needed in terms of knowledge and application of instrumentation technology.
Standard-setting body:
Demonstrate knowledge of thermodynamics and heat transfer
This standard has expired and is no longer available.
Version 2
19238 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated knowledge of: - the specific heat of gases at constant volume and at constant pressure; - isothermal, isentropic, and adiabatic processes and their practical applications; - ideal cycles and real cycles in internal combustion engines and compressors; - modes and applications of heat transfer; - the properties of steam under varying conditions; and - the application of thermodynamics to industrial processes.
Standard-setting body:
Demonstrate knowledge of fluid mechanics for industrial measurement and control
This standard has expired and is no longer available.
Version 2
19239 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated knowledge of: - fluids; - fluid flow and the effects of fluid viscosity and density; - fluid flow in pipes; - pump, fan, and compressor principles for fluid flow applications; and - fluid flow in open channels.
Standard-setting body:
Demonstrate knowledge of physical and chemical processes used in industry
This standard has expired and is no longer available.
Version 2
19240 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated knowledge of: - process chemistry; - distillation; - absorption and scrubbing, and evaporation and drying; - water treatment processes; - waste water treatment and effluent disposal processes; - combustion; and - exothermic and endothermic processes.
Standard-setting body:
Demonstrate knowledge of safety and compliance for industrial measurement and control systems
Version 3
19241 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. People credited with this unit standard are able to: - demonstrate knowledge of the legal requirements for the design and operation of instrumentation and control systems; - demonstrate knowledge of the layers of protection in safety related instrumentation and control systems; - interpret documentation used to define safety related instrumentation systems; - describe important factors used in the design of safety related instrumentation systems; - describe processes for working on safety related instrumentation and control systems, including documentation; and - describe procedures for work involving temporary overriding, disabling, or forcing of safety related systems and the justification, risks, and requirements of such actions.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of earthing, shielding, and surge protection of industrial equipment
This standard has expired and is no longer available.
Version 2
19242 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated knowledge of: - electrical interference; - earthing; - coupling of interference into electrical systems and its reduction; - electrical shielding in buildings; and - surge protection.
Standard-setting body:
Select, size, and specify control valves for simple process applications
This standard has expired and is no longer available.
Version 2
19243 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated ability to: - obtain information to allow control valves to be correctly sized; - calculate valve coefficient (Cv) values using vendor's software; - select control valve body styles and characteristics; - select actuators for control valves; - specify materials of construction for control valves; and - specify details for control valve installations.
Standard-setting body:
Select, size, and specify flowmeters for simple process applications
This standard has expired and is no longer available.
Version 2
19244 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated ability to: - obtain information to allow flow meters to be correctly sized and selected; - calculate size of differential pressure element using computer software; - calculate size for non-differential flow elements; - select style of flow meter; - specify materials of construction for flow meters; and - specify suitable installations for flow meters.
Standard-setting body:
Demonstrate and apply intermediate knowledge of instrumentation and control system engineering
Version 2
22743 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard covers intermediate knowledge of the concepts used in industrial measurement and control systems for engineers. People credited with this unit standard are able to: - demonstrate knowledge of transmitters and standard transmission signals; - demonstrate knowledge of and apply measurement system performance terminology and standards; - describe and apply feedback control systems principles; and - demonstrate and apply knowledge of controller strategies.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of the selection and specification of equipment for industrial measurement and control systems
Version 2
25885 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. People credited with this unit standard are able to: - identify process and environmental information required for equipment selection; - specify details for equipment installations in accordance with process and environmental requirements; - specify equipment construction materials in accordance with process and environmental requirements; and - select equipment for given process applications.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of control system hardware and interfaces for industrial measurement and control systems
Version 2
25886 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. People credited with this unit standard are able to demonstrate knowledge of: - hardware platforms for control systems; - industrial data communication systems; - earthing, bonding, and shielding as applied to industrial instrumentation and control systems; - surge and interference protection; and - operator interfaces.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of process theory for industrial measurement and control processes and applications
Version 2
25887 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. People credited with this unit standard are able to demonstrate knowledge of: - thermodynamic processes and their practical applications; - boiler turbine processes; - modes and applications of heat transfer; - the properties of steam under varying conditions and applications; - gas characteristics; - resistance to fluid flow as applied to a process application; and - process chemistry.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate knowledge of process theory for industrial measurement and control systems
Version 2
25888 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control. People credited with this unit standard are able to demonstrate knowledge of: - process dynamics; - controlled variable/manipulated variable pairing; - process disturbances; - process control criteria; and - standard control system strategies.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Develop user and functional requirement specifications for automated industrial processes
Version 2
28118 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of process automation technicians in developing techniques to analyse control requirements for automated industrial process plant. People credited with this unit standard are able to: - explain the purpose of user and functional specifications for the defining of automated industrial processes; and - develop user and functional requirement specifications for automated industrial processes.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Level 6
Describe and apply advanced control technology
This standard has expired and is no longer available.
Version 3
11574 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the given concepts in advanced control technology, and apply advanced control technology in given applications. This unit standard applies to a person in a technician engineer type of role and represents the cognitive capability needed in terms of knowledge and application of advanced control technology.
Standard-setting body:
Describe and apply advanced measurement technology
This standard has expired and is no longer available.
Version 3
11575 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the given concepts in advanced measurement technology, and apply advanced measurement technology in given applications. This unit standard applies to a person in a technician engineer type of role and represents the cognitive capability needed in terms of knowledge and application of advanced measurement technology.
Standard-setting body:
Design, test, and configure industrial data communication systems
This standard has expired and is no longer available.
Version 2
19245 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. People credited with this unit standard have demonstrated: - knowledge of transmission and network aspects of industrial data communication systems; - ability to design and test cable systems for industrial data communications; and - ability to configure industrial data communication systems.
Standard-setting body:
Describe and implement SCADA/HMI systems
This standard has expired and is no longer available.
Version 2
19246 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for use in the training and assessment of industrial measurement and control technicians beyond the knowledge and skills included in the National Certificate in Industrial Measurement and Control (Level 4) [Ref: 0410]. SCADA/HMI - refers to software packages implementing Supervisory Control and Data Acquisition (SCADA) as well as Human-Machine Interface (HMI) functions. People credited with this unit standard have demonstrated: - knowledge of SCADA/HMI software packages; - knowledge of effective screen design for SCADA/HMI; and - ability to design and implement a SCADA/HMI system.
Standard-setting body:
Demonstrate and apply knowledge of industrial automation engineering
Version 3
22744 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the concepts used in industrial automation engineering. People credited with this unit standard are able to: - demonstrate knowledge of, select, and use transducers in practical industrial applications; - prepare and interpret diagrams using ISO standard symbols and operate pneumatic and hydraulic components using simulation software; - demonstrate and apply knowledge of actuators and associated control equipment; - demonstrate knowledge of rotating machinery and motion converters; and - build, program, test, and document an automation application to given specifications.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Demonstrate and apply advanced knowledge of instrumentation and control principles
Version 2
22745 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard covers advanced industrial measurement and control systems and includes detailed measurement and control strategies, advanced control systems, and elementary process modelling. People credited with this unit standard are able to: - demonstrate knowledge of and apply process measurement; - demonstrate knowledge of, and use final control elements, mathematical models and advanced control strategies; and - develop a practical measurement and control process to a given specification.
Consent & Moderation Requirements:
CMR 3
Standard-setting body:
Waihanga Ara Rau Construction and Infrastructure Workforce Development Council
Data as at 2024-04-23 23:01:10.73