- Home
- Qualifications and standards
- NCEA
- M?ori and Pasifika
-
Providers and partners
- About education organisations
- NZQA's quality assurance system for tertiary education organisations
- Guidelines and forms
- Quick links to NZQF documents
- Consistency of graduate outcomes
- Approval, accreditation and registration
- Monitoring and Assessment
- Self-assessment
- External evaluation and review
- Assessment and moderation of standards
- Submitting results and awarding qualifications and micro-credentials
- Interim domestic Code of Practice (current)
- International Code of Practice (current)
- Tertiary and International Learners Code of Practice
- Offshore use of qualifications and programmes
- Assessment and moderation
- registration-and-accreditation
- caring-for-international-students
- Reform of Vocational Education
- International Education planning
- international
- About us
Domain - Industrial Measurement and Control - Theory
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Industrial Measurement and Control > Industrial Measurement and Control - Theory
0 Qualifications | 53 Assessment Standards (53 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
Level 3 | ||||||
24888 | Unit |
Prepare and interpret diagrams for instrumentation and control systems |
3 Credits | |||
2630 | Unit |
Demonstrate knowledge of pressure measurement systems used in industry |
4 Credits | |||
2632 | Unit |
Demonstrate knowledge of level measurement systems used in industry |
3 Credits | |||
2634 | Unit |
Demonstrate knowledge of temperature measurement systems used in industry |
5 Credits | |||
2636 | Unit |
Demonstrate knowledge of flow measurement systems used in industry |
4 Credits | |||
2638 | Unit |
Demonstrate knowledge of control valves, actuators, and positioners |
4 Credits | |||
2653 | Unit |
Demonstrate knowledge of strain gauges and weighing systems This standard has expired and is no longer available. |
2 Credits | |||
2659 | Unit |
Demonstrate knowledge of transducers and their applications in industrial measurement This standard has expired and is no longer available. |
5 Credits | |||
2663 | Unit |
Demonstrate knowledge of hydraulic control equipment used in industry This standard has expired and is no longer available. |
4 Credits | |||
2665 | Unit |
Demonstrate knowledge of instrumentation calibration terminology and standards This standard has expired and is no longer available. |
3 Credits | |||
2666 | Unit |
Demonstrate knowledge of pneumatic control equipment used in industry This standard has expired and is no longer available. |
4 Credits | |||
2668 | Unit |
Demonstrate knowledge of flame, gas, smoke, and heat detectors This standard has expired and is no longer available. |
2 Credits | |||
28077 | Unit |
Demonstrate knowledge of the physical principles of instrumentation systems |
5 Credits | |||
28078 | Unit |
Demonstrate knowledge of industrial measurement processes, standards, and calibration |
4 Credits | |||
28079 | Unit |
Demonstrate and apply fundamental knowledge of digital and analogue electronics for IMC technicians |
12 Credits | |||
28082 | Unit |
Demonstrate knowledge of transducers and strain gauges and their applications in industrial measurement |
7 Credits | |||
28083 | Unit |
Demonstrate knowledge of hydraulic and pneumatic control equipment used in industrial process control applications |
6 Credits | |||
Level 4 | ||||||
17036 | Unit |
Describe and apply process science concepts This standard has expired and is no longer available. |
6 Credits | |||
24886 | Unit |
Demonstrate and apply knowledge of electronic configurable instruments and loops used in industry |
3 Credits | |||
24887 | Unit |
Demonstrate knowledge of electronic variable speed drives |
3 Credits | |||
2641 | Unit |
Demonstrate knowledge of analytical measurement systems This standard has expired and is no longer available. |
6 Credits | |||
2649 | Unit |
Demonstrate knowledge of signal conditioners, trending recorders, and alarm systems |
3 Credits | |||
2650 | Unit |
Demonstrate an understanding of smart instruments and loops used in industry This standard has expired and is no longer available. |
2 Credits | |||
2654 | Unit |
Demonstrate knowledge of on/off and proportional integral derivative mode control theory and controllers |
8 Credits | |||
2655 | Unit |
Tune control loops |
6 Credits | |||
2658 | Unit |
Demonstrate an understanding of programmable logic controllers This standard has expired and is no longer available. |
2 Credits | |||
2660 | Unit |
Demonstrate knowledge of advanced control loop methods This standard has expired and is no longer available. |
3 Credits | |||
2661 | Unit |
Configure and tune advanced control loops This standard has expired and is no longer available. |
4 Credits | |||
2662 | Unit |
Demonstrate knowledge of distributed control systems |
2 Credits | |||
28076 | Unit |
Demonstrate and apply knowledge of advanced control loop methods |
7 Credits | |||
28080 | Unit |
Demonstrate knowledge of liquid analytical measurement systems |
3 Credits | |||
28081 | Unit |
Demonstrate knowledge of gas analytical measurement and flame, gas, smoke, and heat detection |
5 Credits | |||
Level 5 | ||||||
11562 | Unit |
Describe and apply control technology This standard has expired and is no longer available. |
12 Credits | |||
11563 | Unit |
Describe and apply instrumentation technology This standard has expired and is no longer available. |
12 Credits | |||
19238 | Unit |
Demonstrate knowledge of thermodynamics and heat transfer This standard has expired and is no longer available. |
8 Credits | |||
19239 | Unit |
Demonstrate knowledge of fluid mechanics for industrial measurement and control This standard has expired and is no longer available. |
8 Credits | |||
19240 | Unit |
Demonstrate knowledge of physical and chemical processes used in industry This standard has expired and is no longer available. |
8 Credits | |||
19241 | Unit |
Demonstrate knowledge of safety and compliance for industrial measurement and control systems |
10 Credits | |||
19242 | Unit |
Demonstrate knowledge of earthing, shielding, and surge protection of industrial equipment This standard has expired and is no longer available. |
8 Credits | |||
19243 | Unit |
Select, size, and specify control valves for simple process applications This standard has expired and is no longer available. |
8 Credits | |||
19244 | Unit |
Select, size, and specify flowmeters for simple process applications This standard has expired and is no longer available. |
8 Credits | |||
22743 | Unit |
Demonstrate and apply intermediate knowledge of instrumentation and control system engineering |
15 Credits | |||
25885 | Unit |
Demonstrate knowledge of the selection and specification of equipment for industrial measurement and control systems |
15 Credits | |||
25886 | Unit |
Demonstrate knowledge of control system hardware and interfaces for industrial measurement and control systems |
15 Credits | |||
25887 | Unit |
Demonstrate knowledge of process theory for industrial measurement and control processes and applications |
15 Credits | |||
25888 | Unit |
Demonstrate knowledge of process theory for industrial measurement and control systems |
5 Credits | |||
28118 | Unit |
Develop user and functional requirement specifications for automated industrial processes |
5 Credits | |||
Level 6 | ||||||
11574 | Unit |
Describe and apply advanced control technology This standard has expired and is no longer available. |
15 Credits | |||
11575 | Unit |
Describe and apply advanced measurement technology This standard has expired and is no longer available. |
15 Credits | |||
19245 | Unit |
Design, test, and configure industrial data communication systems This standard has expired and is no longer available. |
8 Credits | |||
19246 | Unit |
Describe and implement SCADA/HMI systems This standard has expired and is no longer available. |
8 Credits | |||
22744 | Unit |
Demonstrate and apply knowledge of industrial automation engineering |
15 Credits | |||
22745 | Unit |
Demonstrate and apply advanced knowledge of instrumentation and control principles |
15 Credits |