Domain - Manufacturing Processes

Demonstrate knowledge of and prepare surfaces for protective coating application

Version 6

17527 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of surface contaminants and preparation; demonstrate knowledge of protective coating material, coating process, and surface preparation equipment; prepare surfaces for protective coating application; clean up job and document surface preparation; and maintain and store surface preparation tools and equipment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Work safely under supervision in blaster coating operations

Version 6

17537 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to work safely under supervision in blaster coating operations.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of health and safety for blaster coating operations

Version 7

17547 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe health and safety requirements for blaster coating operations; demonstrate knowledge of hazard control and emergency procedures at a blaster coating workplace; identify and describe hazards of protective coating materials; describe personal protective equipment used in blaster coating operations; and describe environmental harm and safety associated with blaster coating operations.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of and carry out company quality procedures in a manufacturing environment

Version 5

19506 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the quality requirements and processes of a company; and carry out company quality procedures, in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Fill and close containers in a manufacturing environment

Version 4

20298 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to package, and fill and package products in containers, in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Label containers manually in a manufacturing environment

Version 4

20299 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to manually label containers, and manually label containers, in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Maintain housekeeping in a manufacturing environment

Version 4

21329 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the maintenance of housekeeping; and maintain housekeeping in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Perform calculations for manufacturing production processes

Version 4

21330 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to perform calculations for manufacturing production processes.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Perform basic computing functions in a manufacturing environment

Version 4

21331 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain the basic terminology, methods of operation, and techniques used for computing functions in a manufacturing environment; and apply the basic terminology, methods of operation, and techniques on a manufacturing computerised system.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of health factors that affect the performance of manufacturing workers
This standard is expiring. The last date for assessment to take place is 31 December 2023.

Version 4 This unit standard was replaced by unit standard 32565.

29366 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of fluid loss as part of everyday work for manufacturing workers; describe hydration and types and volumes of fluids required to maintain adequate hydration at a manufacturing workplace, and explain the benefits associated with frequent fluid intake; explain the role of diet in maintaining the physical wellbeing of manufacturing workers; describe causes and effects of fatigue on the work performance of workers in manufacturing and explain ways to reduce fatigue; and explain how performance is maintained by prompt attention to personal health.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate employment and interrelationship foundation skills in a manufacturing operation

Version 3

29367 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe organisational structures, systems, and employee rights and responsibilities; describe own role as part of the larger organisational structure; and work within a team and describe personal presentation and absences requirements, in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Communicate effectively and work cooperatively to complete production tasks in a manufacturing environment

Version 1

32318 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is designed for people in entry-level roles in a manufacturing operation. People credited with this unit standard are, in a manufacturing environment able to: communicate effectively and work cooperatively to complete production tasks.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of fatigue of workers in a manufacturing environment

Version 1 This unit standard replaced unit standard 29366.

32565 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe effects of fatigue on the performance of workers in manufacturing; and describe ways to reduce workplace fatigue of workers in manufacturing.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Perform process operations in a manufacturing environment

Version 7

4804 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to perform process operations in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Perform non-ferrous metal extrusion processes

Version 6

4805 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to perform non-ferrous metal extrusion processes.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Feed materials or components in a manufacturing environment

Version 7

4809 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: perform feeding operations; and perform shut-down operations in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Assemble components within a manufacturing environment

Version 6

4813 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for assembly; assemble components; and complete job requirements and documentation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Hand assemble components within a manufacturing environment

Version 7

4814 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, within a manufacturing environment: prepare for hand assembly of components; hand assemble components; and complete job requirements and documentation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of and operate abrasive blast pot

Version 6

17525 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of an abrasive blast pot system and abrasive standards; operate abrasive blast pot; demonstrate blast-cleaning techniques and standards using a blast pot; and clean, maintain, and store abrasive blast pot equipment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of and operate low-pressure water blaster for blaster coating operations

Version 6

17526 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of low-pressure water blasters; prepare for low-pressure water blasting; operate a low-pressure water blaster for blaster coating operations; and maintain and store low-pressure water blasting equipment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of abrasive blasting and protective coating

Version 6

17531 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of abrasive blasting media; describe protective coating materials; describe abrasive blasting equipment; describe equipment for applying protective coatings; and describe access equipment for abrasive blasting and protective coating operations.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Prepare for and apply wet protective coatings

Version 6

17540 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for application of wet protective coating; demonstrate knowledge of paint thinning and apply wet protective coating; and maintain and store wet protective coating equipment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Interpret and apply assembly drawings to ensure product quality

Version 5

19504 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of drawing control procedures; identify and interpret assembly drawings; and apply assembly drawing interpretation to meet job requirements and check product quality.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Interpret and apply production drawings to ensure product quality in a manufacturing environment

Version 5

19505 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able, in a manufacturing environment, to apply drawing control procedures; identify and interpret production drawings; and apply production drawing interpretation to job requirements, and check product quality.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Maintain and control a manufacturing process to ensure product quality

Version 5

19507 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: perform manufacturing process control procedures; demonstrate and apply knowledge of the analysis of results of manufacturing process tests, and record results; and adjust manufacturing process parameters as required to ensure product quality.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Operate Computer Numerical Controlled (CNC) Machinery for metal processing
This standard has expired and is no longer available.

Version 4

19508 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare job requirements for metal processing on a CNC machine; select CNC programme and set up machine for metal processing; prepare materials for metal processing; operate a CNC machine for metal processing; and identify and rectify machine faults.

Standard-setting body:

Competenz

Set up and operate automated container labelling equipment
This standard is expiring. The last date for assessment to take place is 31 December 2023.

Version 5 This unit standard and unit standard 20301 were replaced by unit standard 32564.

20300 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to set up, and operate automated container labelling equipment.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Set up and operate automated filling equipment
This standard is expiring. The last date for assessment to take place is 31 December 2023.

Version 5 This unit standard and unit standard 20300 were replaced by unit standard 32564.

20301 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to set up, and operate automated filling equipment to package products in accordance with enterprise procedure.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of establishing improvements in a manufacturing environment

Version 4

21332 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe the benefits of continuous improvement in a manufacturing environment; demonstrate knowledge of output measures in a manufacturing environment; describe how continuous improvement systems are promoted in a manufacturing environment; and identify and describe opportunities for improvement in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of workflow management in a manufacturing environment

Version 3

21333 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of workflow systems; and describe a workflow system''s documentation or software.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Perform pre-start checks, use, and shut down a compressor for blaster coating operations

Version 6

23539 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are, for blaster coating operations, able to: perform pre-start checks and procedures on a compressor; use a compressor; and follow shutdown procedures for a compressor.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Apply productivity improvement principles in a manufacturing team environment

Version 2

27853 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of productivity improvement principles and their application in the manufacture of a product; contribute within a manufacturing team to apply productivity improvement principles; and apply productivity improvement principles to manufacturing tasks.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of sustainable practices for manufacturing processes

Version 1

32313 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify and describe pollutants and pollutant control procedures in manufacturing processes; demonstrate knowledge of benefits to organisations of using sustainable practices in manufacturing processes; and describe sustainability practices used in manufacturing processes.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Describe process interdependencies and map process flows in a manufacturing environment

Version 1

32316 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, in a manufacturing environment: map process flows; and describe downstream process interdependencies and upstream process interdependencies.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate and apply knowledge of digital processes, tasks, security, and data in a manufacturing environment

Version 1

32317 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate and apply knowledge of digital processes and tasks; describe digital security; and demonstrate and apply knowledge of production or safety data, in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Set up and operate automated equipment in a manufacturing environment

Version 1 This unit standard replaced unit standards 20300 and 20301.

32564 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to set up, and operate automated equipment in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Operate a press for non-ferrous metal extrusions
This standard is expiring. The last date for assessment to take place is 31 December 2023.

Version 6

4806 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of extrusion press operations; operate an extrusion press; and shut down an extrusion press operation.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Roller rectify metal extrusions

Version 7

4807 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: respond to hazards and emergencies for roller rectifying metal extrusions; prepare for metal extrusion rectification; and set and operate roller rectifier.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Correct extrusion dies
This standard is expiring. The last date for assessment to take place is 31 December 2023.

Version 7

4808 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: respond to hazards and emergencies for correction of extrusion dies; assess operational capability of a die; perform die correction; trial die; and verify die performance.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Operate mechanical production process machinery in a manufacturing environment

Version 7

4810 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: perform mechanical process operations; and perform shut-down operations for mechanical production process machinery in a manufacturing environment.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Set mechanical production process machinery

Version 6

4811 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for setting mechanical production process machinery; remove tooling from mechanical production process machinery; install and set up tooling on mechanical production process machinery; and verify and complete mechanical production process machinery setting.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Set up, control and monitor equipment to meet production requirements in a manufacturing operation

Version 2

29368 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of production requirements; set up and test run, control and monitor equipment; and undertake ongoing production analysis and identify opportunities for improvement, in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Identify, investigate, diagnose, recommend and implement solutions to rectify issues in a manufacturing operation

Version 2

29369 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify, investigate, diagnose, recommend and implement solutions to rectify issues in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Coordinate a manufacturing operation

Version 2

29370 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of workflow; organise production; control and monitor activities; and undertake ongoing production analysis and identify opportunities for improvement, in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Use problem-solving models to determine solutions to resolve technical manufacturing processing problems

Version 2

29447 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify, select; and apply problem-solving models; and determine solutions to resolve technical manufacturing processing problems.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Control and optimise the assembly line process
This standard has expired and is no longer available.

Version 3

4815 Unit Standard 45 Credits

View Education Organisations with Consent to Assess  »

This unit standard is applicable over a wide range of contexts and/or worksites. People credited with this unit standard are able to control and optimise the assembly line process by monitoring and adjusting line controls, and identifying and correcting line constraints or defects; and set up trial production runs, and adjust for optimisation of product quality, productivity and safety.

Standard-setting body:

Competenz

Demonstrate knowledge of compliance standards and develop a compliance audit process plan in a manufacturing operation

Version 2

29278 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of: compliance standards and Independent Verification Authorities; and develop a compliance audit process plan for an area of compliance in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of key performance indicators to improve production and quality in a manufacturing operation

Version 2

29279 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of key performance indicators; quality management; and critical control points; and evaluate and recommend improvements to key performance indicators for production and quality in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Resolve quality management system and process issues in a manufacturing operation

Version 2

29280 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: resolve quality management system and process issues in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz

Demonstrate knowledge of techniques to generate, evaluate, scope and present new ideas in a manufacturing operation

Version 2

29281 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of techniques to: generate new ideas; gather and analyse data to evaluate new ideas; and determine benefits and constraints relating to new ideas and report a proposal for implementation, in a manufacturing operation.

Consent & Moderation Requirements:

CMR 13

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz