Domain - Aircraft Structures
TOP > Engineering and Technology > Aeronautical Engineering > Aircraft Structures
| 0 Qualifications | 27 Assessment Standards (27 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 3
Demonstrate introductory skills to visually inspect aircraft metal and composite structures
This standard has expired and is no longer available.
Version 2
27864 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, under supervision: prepare to carry out visual inspections of metal and composite aircraft structures; and visually inspect aircraft metal and composite structures.
Standard-setting body:
Identify and remove light corrosion from the surfaces of aircraft structure
Version 3
28033 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This is an entry-level unit standard for people entering the aeronautical engineering industry. People credited with this unit standard are able to: identify corrosion damage on an aircraft structure; remove light corrosion from the surface of an aircraft structure; and clean area and equipment.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Fabricate non-complex sheet metal components for use on aircraft
Version 3
28036 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This is an entry-level unit standard for people entering the aeronautical engineering industry. People credited with this unit standard are able to: prepare to manufacture non-complex components for use on aircraft; prepare non-complex sheet metal for fabrication for use on aircraft; assemble non-complex sheet metal components for use on aircraft; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Level 4
Fabricate and repair aeronautical components by welding
Version 4 This unit standard replaced unit standard 4035.
23653 Unit Standard 42 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of weldable grade aeronautical materials that are compatible with the gas tungsten arc welding (GTAW) process; prepare to weld aeronautical materials; weld aeronautical materials; demonstrate knowledge of quality assurance processes for welding with the GTAW process; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Visually inspect aircraft composite structures
Version 3 This unit standard and unit standard 28140 replaced unit standard 4074.
28139 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to carry out visual inspections of aircraft composite structures; and visually inspect aircraft composite structures.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Visually inspect aircraft metal structures
Version 3 This unit standard and unit standard 28139 replaced unit standard 4074.
28140 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to carry out visual inspections of aircraft metal structures; and visually inspect aircraft metal structures.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair and fabricate aeronautical component parts by brazing or soldering
Version 8
4026 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair and fabricate aeronautical component parts by brazing or soldering; set up soldering or brazing equipment; solder or braze aeronautical component parts; prepare aeronautical components; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Shape aeronautical component parts by punching
Version 7
4032 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to shape aeronautical component parts by punching; set up punching machine; punch aeronautical component parts to shape; prepare aeronautical component parts; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Form aeronautical sheet metals by rolling
Version 7
4033 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: form aeronautical sheet metal by rolling; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Balance aircraft flight control surfaces
Version 7
4067 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: balance aircraft flight control surfaces; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Form aeronautical sheet aluminium alloys by slapping and beating
Version 7
4068 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to form aeronautical sheet aluminium alloys by slapping and beating; form sheet metal; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Cold work holes in aeronautical aluminium alloys
Version 7
4069 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to cold work holes in aeronautical aluminium alloys; cold work holes; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Shape aeronautical sheet metals by cutting
Version 7
4070 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to shape aeronautical sheet metals by cutting; cut aeronautical sheet metals; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Apply or repair external fabric coverings over aircraft structures
Version 7
4071 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to apply or repair external fabric coverings over aircraft structures; apply or repair fabric; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Fold aeronautical sheet metals
Version 7
4072 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: fold aeronautical sheet metals; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Heat treat aeronautical metals and components
Version 7
4073 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to heat treat aeronautical metals and components; heat treat metals and components; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Visually inspect aircraft metal and composite structures
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 28139 and unit standard 28140.
4074 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to carry out visual inspections of metal and composite aircraft structures, and visually inspect aircraft metal and composite structures.
Standard-setting body:
Repair or modify an aircraft metal structure
Version 7
4075 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair or modify an aircraft structure; repair or modify an aircraft structure; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair and fabricate aeronautical wooden structural components
Version 7
4076 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair and fabricate aeronautical wooden structural components; repair and fabricate aeronautical wooden structural components; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Rig aircraft flying bracing wires
Version 7
4077 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to rig aircraft flying bracing wires; rectify rigging defects; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Assemble aircraft metal components using fasteners
Version 7
4078 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to assemble aircraft metal components; assemble aircraft metal components using fasteners; and carry out completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Form aeronautical sheet metal items by rubber pressing
Version 7
4079 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to form aeronautical sheet metal items by rubber pressing; form aeronautical sheet metal items by rubber pressing; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Assemble aeronautical metal components by bonding
Version 7
4080 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to assemble aeronautical metal components by bonding; assemble aeronautical metal components; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Form aeronautical sheet metals by shrinking and stretching
Version 7
4081 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to form aeronautical sheet metals by shrinking and stretching; form aeronautical sheet metals by shrinking and stretching; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Repair aircraft plastic transparencies
Version 7
4082 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair aircraft plastic transparencies; restore transparency airworthiness on aircraft; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Form aeronautical sheet metals by wheeling
Version 7
4083 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to form aeronautical sheet metals by wheeling; form aeronautical sheet metals by wheeling; and carry out task completion activities.
Consent & Moderation Requirements:
CMR 28
Standard-setting body:
Level 5
Fabricate and/or repair aeronautical components by welding
This standard has expired and is no longer available.
Version 4 This unit standard has been replaced by unit standard 23653.
4035 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to fabricate and repair aeronautical components using gas tungsten arc and/or plasma arc welding processes. This unit standard supplements general engineering unit standards enabling people to meet aeronautical welding standards.
Standard-setting body:
Data as at 2025-05-01 23:01:07.45