Domain - Automotive Electrical and Electronics
TOP > Engineering and Technology > Motor Industry > Automotive Electrical and Electronics
| 0 Qualifications | 172 Assessment Standards (169 Units & 3 Skills) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 1
Identify, remove and replace motor vehicle lamps in the motor industry
This standard has expired and is no longer available.
Version 7 This unit standard has been replaced by unit standard 21719.
3864 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in the motor industry. People credited with this unit standard are able to: demonstrate knowledge of the lighting systems on a motor vehicle; remove a lamp; and replace a lamp.
Standard-setting body:
Level 2
Demonstrate knowledge of testing automotive electrical circuits
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 21707 were replaced by unit standard 29371.
21667 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of testing automotive electrical circuits.
Standard-setting body:
Demonstrate knowledge of automotive batteries
This standard has expired and is no longer available.
Version 3 This unit standard and unit standard 3877 were replaced by unit standard 30572.
21675 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of automotive batteries, their service requirements, and testing an automotive battery.
Standard-setting body:
Select test equipment and test an automotive electrical circuit
This standard has expired and is no longer available.
Version 3 This unit standard and unit standard 24106 were replaced by unit standard 30558. This unit standard and unit standard 21707 replaced unit standard 232.
21676 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to check voltage readings of automotive circuits, check current flow readings of automotive circuits, check resistance readings of automotive components and locate a fault in an automotive lighting circuit.
Standard-setting body:
Demonstrate knowledge of automotive electrical principles
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 21667 were replaced by unit standard 29371.
21707 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of automotive electrical principles.
Standard-setting body:
Remove and replace a lamp on a motor vehicle
Version 3 This unit standard replaced unit standard 3864.
21719 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove and replace a lamp on a motor vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test an automotive electrical circuit
This standard has expired and is no longer available.
Version 11 This unit standard was replaced by unit standard 21676 and unit standard 21707.
232 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of automotive electrical principles; check voltage readings of automotive circuits; check current flow readings of automotive circuits; check resistance readings of automotive components; and locate a fault in an automotive lighting circuit.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service a lead-acid automotive battery
This standard has expired and is no longer available.
Version 11 This unit standard was replaced by unit standard 30556.
233 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to determine the serviceability of a lead-acid battery, replace a lead-acid battery on a vehicle, charge a lead-acid battery, and carry out an emergency start on a flat battery.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive starting and charging systems and their operation
This standard has expired and is no longer available.
Version 10 This unit standard was replaced by unit standard 30563.
234 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of electromagnetism as applied to automotive units, the operation of a charging system that uses an alternator, and the operation of a starting system.
Standard-setting body:
Demonstrate knowledge of automotive ignition systems and their operation
This standard has expired and is no longer available.
Version 10 This unit standard and unit standard 24116 were replaced by unit standard 30574.
235 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of: the operation of a contact breaker ignition system, the operation of distributor type electronic ignition systems, the layout and components of magneto ignition systems, and the circuit layout and components in distributorless ignition systems.
Standard-setting body:
Demonstrate knowledge of protecting vehicle electronics in the motor industry
This standard has expired and is no longer available.
Version 9 This unit standard and unit standard 21675 were replaced by unit standard 30572.
3877 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of motor vehicle electronics, the causes and cost of damage to motor vehicle electronic control units, and protecting motor vehicle electronic control units.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 3
Demonstrate knowledge of, and service traction batteries on electric forklifts
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24136 and unit standard 24137.
15379 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the forklift engineering and related industries. People credited with this unit standard are able to: demonstrate knowledge of traction type batteries and their service requirements; test and replace batteries on electric forklifts; and maintain traction batteries and associated cables and connections.
Standard-setting body:
Demonstrate knowledge of vehicle security systems and their installation
This standard has expired and is no longer available.
Version 4 This unit standard and unit standards 24121, 24122 and 24123 were replaced by unit standard 31062.
16114 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive industry. People credited with this unit standard are able to demonstrate knowledge of vehicle security systems, and security system installation considerations.
Standard-setting body:
Overhaul an ignition distributor
Version 4
2326 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive electrical repair industry. People credited with this unit standard are able to: test and inspect an ignition distributor; rectify distributor faults; and assemble and test the distributor.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of competition race vehicle electronic data analysis systems
This standard has expired and is no longer available.
Version 2
23803 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of competition race vehicle electronic data analysis systems.
Standard-setting body:
Demonstrate knowledge of communication systems used in competition race vehicles and teams
This standard has expired and is no longer available.
Version 2
23804 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who work in a motorsport environment. People credited with this unit standard are able to demonstrate knowledge of communication systems used in competition race vehicles, and the use of communication systems between competition race vehicles and motorsport teams.
Standard-setting body:
Demonstrate knowledge of diagnosing faults in engine management systems
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31056. This unit standard and unit standard 24091 replaced unit standard 892, unit standard 961, and unit standard 5460.
24090 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of diagnosing faults in engine management systems.
Standard-setting body:
Demonstrate knowledge of automotive lighting systems, and headlamp adjustment
This standard has expired and is no longer available.
Version 3 This unit standard was replaced by unit standard 30564. This unit standard and unit standard 24093 replaced unit standard 877.
24092 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of the functions of motor vehicle lighting systems, and adjusting headlamps on a motor vehicle.
Standard-setting body:
Rectify simple vehicle lighting faults, and adjust vehicle lamps
Version 3 This unit standard and unit standard 24092 replaced unit standard 877.
24093 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to rectify simple faults in a vehicle lighting system, and adjust vehicle lamps.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of windscreen wiper and headlamp cleaning systems
Version 2 This unit standard and unit standard 24095 replaced unit standard 887.
24094 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of windscreen wiper systems, and headlamp cleaning systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of wiring and wiring diagrams used in automotive circuits
Version 3 This unit standard and unit standard 24106 replaced unit standard 899.
24105 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of wiring and wiring diagrams used in automotive circuits.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out automotive wiring repairs and replace a wiring circuit
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 21676 were replaced by unit standard 30558. This unit standard and unit standard 24105 replaced unit standard 899.
24106 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to carry out automotive wiring repairs, and replace an automotive wiring circuit.
Standard-setting body:
Demonstrate knowledge of an automotive charging system that uses a direct current (dc) generator
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24108 replaced unit standard 904.
24107 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive electrical repair industry. People credited with this unit standard are able to demonstrate knowledge of an automotive charging system that uses a dc generator.
Standard-setting body:
Test for and rectify faults in an automotive direct current (dc) type generator charging system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24107 replaced unit standard 904.
24108 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical repair industry. People credited with this unit standard are able to: test an automotive dc charging system and rectify faults; test and inspect an automotive dc generator; rectify faults in automotive dc generator components; assemble and test an automotive dc generator; and adjust an automotive dc regulator and cut-out.
Standard-setting body:
Diagnose and rectify faults in an engine flywheel ignition system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24116 replaced unit standard 979.
24115 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motor industry. People credited with this unit standard are able to diagnose faults in flywheel magneto ignition systems and their components, and rectify faults on a flywheel ignition system.
Standard-setting body:
Demonstrate knowledge of contact breaker and capacitor discharge ignition systems used on motorcycles and small engines
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 235 were replaced by unit standard 30574. This unit standard and unit standard 24115 replaced unit standard 979.
24116 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle and outdoor power equipment industries. People credited with this unit standard are able to demonstrate knowledge of a contact breaker (CB) ignition system and diagnostic procedures, and the operation and diagnostic procedures of a capacitor discharge ignition (CDI) system used on motorcycles and small engines.
Standard-setting body:
Create and measure automotive series-parallel circuits, and calculate values of power in automotive circuits
Version 2 This unit standard, unit standard 24130, unit standard 24131, and unit standard 24132 replaced unit standard 5464.
24129 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: create automotive series-parallel circuits using resistors and calculate voltage and current distribution for an automotive application; and calculate values of power in an automotive circuit.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of inductance, capacitors and chokes, and alternating current used in automotive applications
Version 2 This unit standard, unit standard 24129, unit standard 24131, and unit standard 24132 replaced unit standard 5464.
24130 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for automotive applications, demonstrate knowledge of: inductance; capacitors and chokes; and alternating current (ac) used.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of electronic components and their application in the automotive industry
Version 3 This unit standard, unit standard 24129, unit standard 24130, and unit standard 24132 replaced unit standard 5464. This unit standard and unit standard 24132 replaced unit standard 8187. This unit standard and unit standard 24134 replaced unit standard
24131 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: resistors and thermistors used in automotive electronic applications; diodes used in automotive electrical and electronic applications; transistors used in automotive circuits; and sensors and actuators in automotive circuits; and describe operational amplifier application for automotive circuits; silicon controlled rectifiers (SCRs) in automotive circuits
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of integrated electronic devices, multiplexing, and microprocessors in the automotive industry
Version 2 This unit standard, unit standard 24129, unit standard 24130, and unit standard 24131 replaced unit standard 5464. This unit standard and unit standard 24131 replaced unit standard 8187.
24132 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: digital fundamentals for automotive circuits; multiplex wiring for automotive circuits; and microprocessors used in automotive circuits.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of traction type batteries and their service requirements
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24137 replaced unit standard 15379.
24136 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the materials handling equipment and related industries. People credited with this unit standard are able to demonstrate knowledge of traction type batteries, and traction type battery service requirements.
Standard-setting body:
Service traction type batteries used on electric materials handling equipment
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24136 replaced unit standard 15379.
24137 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the materials handling equipment and related industries. People credited with this unit standard are able to test and replace traction type batteries on electric materials handling equipment, and charge and maintain traction type batteries and associated cables and connections.
Standard-setting body:
Install an immobiliser system in a vehicle
Version 2 This unit standard and unit standard 24139 replaced unit standard 16115.
24138 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to install an immobiliser system in a vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of starting and charging systems and fault diagnosis on motorcycles or all-terrain vehicles (ATVs)
Version 2
24143 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of charging systems and fault diagnosis on motorcycles or ATVs; and starting systems and fault diagnosis on motorcycles or ATVs.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove, replace and calibrate a traction, steering or hydraulic controller on a forklift
Version 2
24145 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove, replace and calibrate a traction, steering or hydraulic controller on a forklift.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Adjust or calibrate controller systems on materials handling equipment
Version 2
24146 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: adjust or calibrate a traction, steering or hydraulic controller on materials handling equipment; and adjust or calibrate an electronic hydraulic controller on materials handling equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of engine management systems
Version 2
24148 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe engine management systems functions; and demonstrate knowledge of combining electronic ignition with engine management functions.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe overhauling starter motors
Version 2
24149 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe starter motor dismantling, inspecting, and testing procedures; and rectifying starter motor faults and reassembling and testing the unit.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe overhauling automotive alternators
Version 2
24150 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe automotive alternator component dismantling, inspecting, and testing procedures; and describe repairing and replacing automotive alternator components, and reassembling and testing the unit.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test and rectify faults in automotive alternator circuits, and overhaul an automotive alternator
Version 2 This unit standard replaced unit standard 889 and unit standard 5457.
24654 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: test an alternator unit and circuit; and rectify faults in an alternator circuit and overhaul an automotive alternator.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive electrical principles and circuit testing
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 30571. This unit standard replaced unit standard 21667 and 21707.
29371 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of automotive electrical principles, and testing of automotive electrical circuits.
Standard-setting body:
Service an automotive battery
Version 1 This unit standard replaced unit standard 233.
30556 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to determine the serviceability of an automotive battery, charge an automotive battery, replace an automotive battery, and jump-start a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test and repair automotive electrical circuits
Version 1 This unit standard replaced unit standard 21676 and unit standard 24106.
30558 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the automotive repair industry. People credited with this unit standard are able to test and repair automotive electrical circuits.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive charging and starting systems
Version 1 This unit standard replaced unit standard 234.
30563 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of electromagnetism, and automotive charging and starting systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive lighting
Version 1 This unit standard replaced unit standard 24092.
30564 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of vehicle lighting and headlamp alignment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hybrid electric and battery electric vehicles or machines
Version 1
30569 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to, for hybrid electric vehicles or machines (HEV) and battery electric vehicles or machines (BEV), demonstrate knowledge of: safety requirements; energy storage systems and components; and drive systems and components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of the principles and testing of automotive electrical circuits
Version 1 This unit standard replaced unit standard 29371.
30571 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of automotive electrical principles and testing of automotive electrical circuits.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of a supplemental restraint system
Version 1 This unit standard replaced unit standard 22800 and unit standard 24000.
30573 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of a supplemental restraint system (SRS).
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of ignition systems
Version 1 This unit standard replaced unit standard 235 and unit standard 24116.
30574 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of ignition systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe automotive electronic components, actuators, sensors and signals
Version 1
30880 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe automotive electronic components, actuators, sensors and signals.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe servicing requirements of multiple automotive batteries and traction batteries
Version 1
30882 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe: the requirements of multiple battery servicing, and traction batteries and their service requirements.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe charging and starting system diagnosis
Version 1
30883 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe charging and starting system diagnosis.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of diagnosing faults in Supplemental Restraint Systems
Version 1
31061 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of diagnosing faults in Supplemental Restraint Systems (SRS).
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive wiring harness design and manufacture
Version 1
31128 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of automotive wiring harness design and manufacture.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test portable generators in the automotive industry
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2 This unit standard was replaced by skill standard 40474.
31894 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to test portable generators in the automotive industry.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe testing of portable generators in the automotive industry
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2 This unit standard was replaced by skill standard 40473.
31895 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe testing of portable generators in the automotive industry.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe the operation and testing of automotive alternators and alternator controls
Version 4
5456 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to describe: alternator component operation; rotor excitation; voltage control; and testing an alternator circuit.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Explain automotive electrical and electronic applications
This standard has expired and is no longer available.
Version 5 This unit standard has been by replaced unit standard 24129, unit standard 24130, unit standard 24131, and unit standard 24132.
5464 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This theory based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of the following used in automotive circuits: inductance; capacitors and chokes; resistors; AC (alternating current); semi-conductors; transistors; amplifier application; silicon controlled rectifiers (SCR''s) and thyristors; digital fundamentals; display devices; multiplex wiring; microprocessors. People are also able to create series-parallel circuits using resistors, calculate voltage and current distribution, and calculate values of power, given any two of voltage, current, or resistance values.
Standard-setting body:
Protect electronics when servicing or repairing a vehicle or machine in the automotive industry
Version 6
5742 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to protect electronics when servicing or repairing a vehicle or machine in the automotive industry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove and replace damaged vehicle wiring
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24105 and unit standard 24133.
5757 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who work in the motor body industry. Those credited with this unit standard are able to: demonstrate knowledge of vehicle wiring systems; and identify, remove, and replace a wiring harness from a damaged vehicle.
Standard-setting body:
Describe electronic components and circuitry for automotive engineering requirements
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24131 and unit standard 24132.
8187 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This theory based unit standard is for people in the automotive engineering repair industry. People credited with this unit standard are able to demonstrate knowledge of: semi-conductors; sensors; transistors; silicon controlled rectifiers and thyristors; digital electronics, and microprocessors as used in automotive circuits.
Standard-setting body:
Identify functions of automotive lighting systems, rectify lighting faults, and adjust vehicle lamps
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24092 and unit standard 24093.
877 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of the functions of motor vehicle lighting systems; adjust driving lamps; and diagnose and rectify faults in a vehicle lighting system.
Standard-setting body:
Overhaul starter motors from light vehicles
Version 5
888 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: test and inspect starter motors from light vehicles; rectify starter motor faults; and assemble and test the starter motor.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Repair an automotive alternator
This standard has expired and is no longer available.
Version 5 This unit standard and unit standard 5457 have been replaced by unit standard 24654.
889 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: test an alternator, remove from the engine, and inspect components; replace brushes and bearings; and assemble and refit the alternator to the engine.
Standard-setting body:
Identify an automotive wiring diagram and translate information to a circuit
Version 5
898 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motor and related industries. People credited with this unit standard are able to: identify and isolate a specified circuit on an automotive wiring diagram; and translate automotive wiring diagram information to a circuit.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out automotive wiring repairs and test circuits for serviceability
This standard has expired and is no longer available.
Version 7 This unit standard was replaced by unit standard 24105 and unit standard 24106.
899 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to: demonstrate knowledge of cables used in automotive wiring circuits; carry out wiring repairs; and test circuits for serviceability.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose faults in an automotive generator type charging system, and overhaul a DC generator
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24107 and unit standard 24108.
904 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical repair industry. People credited with this unit standard are able to: demonstrate knowledge of the operation of charging system that uses a DC (Direct Current) generator; test the charging system and rectify faults; test and inspect a DC generator; rectify faults in generator components; assemble and test a generator; and adjust a regulator and cut-out.
Standard-setting body:
Install electrical accessories in vehicles, and test for and rectify faults
Version 5
909 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: procure an electrical vehicle accessory for installation; install an electrical accessory to the vehicle; test an electrical accessory and its circuit for faults; and rectify electrical accessory componentry and circuit faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service multiple lead-acid battery installations on vehicles, machines or units
Version 5
915 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive industry. People credited with this unit standard are able to: determine the serviceability of lead-acid batteries; replace lead-acid batteries on vehicles, machines or units; charge multiple lead-acid batteries; carry out an emergency start; and repair or replace battery cables and terminals.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Level 4
Diagnose and rectify faults in starting and charging systems, and overhaul starter motors on outdoor powered equipment
Version 5
15374 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: diagnose and rectify faults in a charging system; diagnose and rectify faults in an electrical starting system; and overhaul a starter motor on outdoor powered equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in electronically controlled systems used on heavy vehicles and machines
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24131 and unit standard 24134.
15375 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy engineering industry. People credited with this unit standard are able to demonstrate knowledge of: electronic components used in automotive heavy engineering applications; sensors and actuators used in automotive electronic control systems; automotive electronic control systems; and test an electronically controlled system for faults, and rectify faults in an electronically controlled system.
Standard-setting body:
Diagnose and repair faults in electronically controlled systems used on motorcycles
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24131 and unit standard 24135.
15376 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit are able to: demonstrate knowledge of electronic components used in motorcycle applications; demonstrate knowledge of sensors and actuators used in motorcycle electronic control systems; demonstrate knowledge of motorcycle electronic control systems; test an electronically controlled system for faults; and rectify faults in an electronically controlled system.
Standard-setting body:
Diagnose and rectify faults in a motorcycle electronic ignition system
Version 4
15377 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle and automotive electrical repair industries. People credited with this unit standard are able to: diagnose faults in an electronic ignition system on a motorcycle engine; test electronic ignition system components for faults; and rectify faults in an electronic ignition system on a motorcycle engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in a motorcycle contact breaker battery ignition system
Version 4
15378 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to: diagnose faults in a contact breaker (CB) battery ignition system on a motorcycle engine; test CB battery ignition system components for faults; and rectify faults in a CB battery ignition system on a motorcycle engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Install a security system in a vehicle
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24138 and unit standard 24139.
16115 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to install a security system in a vehicle.
Standard-setting body:
Describe direct current electric motors used in forklifts, and repair speed control systems
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24117 and unit standard 24118.
2339 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the forklift and automotive electrical repair industries. People credited with this unit standard are able to: demonstrate knowledge of direct current electric motors used in forklifts; demonstrate knowledge of speed control systems; and repair faults in forklift direct current electric motors and speed control systems.
Standard-setting body:
Diagnose and rectify faults in vehicle and machine body electronics
This standard has expired and is no longer available.
Version 5
2348 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical industry. People credited with this unit standard are able to: demonstrate knowledge of body electronic systems in vehicles and machines; test a body control system for faults; and rectify body control system faults.
Standard-setting body:
Inspect, diagnose, and rectify faults in engine management systems
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31048. This unit standard and unit standard 24090 replaced unit standard 892, unit standard 961, and unit standard 5460.
24091 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to inspect and diagnose engine management problems; and rectify faults in an engine management system.
Standard-setting body:
Test for and rectify automotive wiper system faults
Version 2 This unit standard and unit standard 24094 replaced unit standard 887.
24095 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: test the wiper automotive system for correct operation; and rectify automotive wiper system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive instruments and gauges, and testing and rectifying system faults
Version 2 This unit standard and unit standard 24114 replaced unit standard 910.
24113 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: analogue and digital automotive instruments and gauges; and testing and rectifying faults in automotive gauge systems, instrument panels, and associated circuits and sensors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in automotive gauges, instruments or instrument clusters
Version 2
24114 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in automotive gauges, instruments or instrument clusters.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of direct and alternating current electric motors used in forklifts and their repair procedures
Version 2 This unit standard and unit standard 24118 replaced unit standard 2339.
24117 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe: direct and alternating current (dc and ac) electric motors used in forklifts, and speed control systems in dc and ac electric motors used in forklifts. They are also able to demonstrate knowledge of repair procedures for forklift dc and ac electric motors and speed control systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare to and rectify faults in forklift direct or alternating current electric motors and speed control systems
Version 2 This unit standard and unit standard 24117 replaced unit standard 2339.
24118 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to rectify faults in forklift direct or alternating current (dc or ac) electric motors and speed control systems; and rectify faults in forklift dc or ac electric motors and speed control systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of vehicle steering and suspension electronic control systems, and testing and rectifying faults
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31066. This unit standard, unit standard 24121, unit standard 24122, unit standard 24123, and unit standard 24124 replaced unit standard 2348 and unit standard 5463.
24119 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of steering and suspension electronic control systems in vehicles, and testing and rectifying steering and suspension control system faults.
Standard-setting body:
Test for and rectify faults in vehicle mechanical and body electronic control systems
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31053. This unit standard replaced unit standard 2348 and unit standard 8182.
24120 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to test a vehicle mechanical and body control system for faults, and rectify mechanical and body control system faults.
Standard-setting body:
Demonstrate knowledge of vehicle body electronic control safety systems, and testing and rectifying faults
This standard has expired and is no longer available.
Version 2 This unit standard and unit standards 16114, 24122 and 24123 were replaced by unit standard 31062. This unit standard, unit standard 24119, unit standard 24122, unit standard 24123, and unit standard 24124 replaced unit standard 2348 and unit standard 546
24121 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of body electronic control safety systems in vehicles, and testing and rectifying body electronic control safety system faults.
Standard-setting body:
Demonstrate knowledge of vehicle body electronic control security systems, and testing and rectifying faults
This standard has expired and is no longer available.
Version 2 This unit standard and unit standards 16114, 24121 and 24123 were replaced by unit standard 31062. This unit standard, unit standard 24119, unit standard 24121, unit standard 24123, and unit standard 24124 replaced unit standard 2348 and unit standard 546
24122 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of body electronic control security systems in vehicles, and testing and rectifying body electronic control security system faults.
Standard-setting body:
Demonstrate knowledge of vehicle comfort and entertainment electronic control systems, and testing and rectifying faults
This standard has expired and is no longer available.
Version 2 This unit standard and unit standards 16114, 24121 and 24122 were replaced by unit standard 31062. This unit standard, unit standard 24119, unit standard 24121, unit standard 24122, and unit standard 24124 replaced unit standard 2348 and unit standard 546
24123 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of comfort and entertainment electronic control systems in vehicles, and testing and rectifying comfort and entertainment electronic control system faults.
Standard-setting body:
Demonstrate knowledge of vehicle powertrain electronic control systems, and testing and rectifying faults
Version 2 This unit standard, unit standard 24119, unit standard 24121, unit standard 24122, and unit standard 24123 replaced unit standard 2348 and unit standard 5463.
24124 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: powertrain electronic control systems in vehicles; and testing and rectifying powertrain electronic control system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe testing heavy vehicle or machine electrical starting and charging systems
Version 2 This unit standard and unit standard 24126 replaced unit standard 3396.
24125 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe testing heavy vehicle or machine electrical starting and charging systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in a heavy vehicle or machine electrical 12 or 24 volt starting and charging systems
Version 2 This unit standard and unit standard 24125 replaced unit standard 3396.
24126 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and rectify faults in a heavy vehicle or machine 12 or 24 volt charging systems and starting systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe automotive lighting requirements and lighting circuit diagnosis
Version 2 This unit standard and unit standard 24128 replaced unit standard 3399.
24127 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe vehicle lamp requirements and application; describe vehicle interior light requirements and describe vehicle light circuitry and diagnosis procedures.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify lighting circuit faults on vehicles or machines
Version 2 This unit standard and unit standard 24127 replaced unit standard 3399.
24128 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and rectify vehicle or machine lighting circuit faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Identify, remove and replace a vehicle or machine wiring harness sub-assembly
Version 3 This unit standard and unit standard 24105 replaced unit standard 5757.
24133 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: identify and remove a wiring harness sub-assembly from a vehicle or machine; and replace a wiring harness sub-assembly on a vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test for and rectify faults in electronically controlled systems used on a heavy vehicle or machine
Version 2 This unit standard and unit standard 24131 replaced unit standard 15375.
24134 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: test electronically controlled systems in a heavy vehicle or machine for faults; and rectify faults in electronically controlled systems in a heavy vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test for and rectify faults in electronically controlled systems used on motorcycles
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24131 replaced unit standard 15376.
24135 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle and automotive electrical repair industries. People credited with this unit standard are able to test a motorcycle electronically controlled system for faults, and rectify faults in a motorcycle electronically controlled system.
Standard-setting body:
Install an aftermarket vehicle or machine body control security system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24138 replaced unit standard 16115.
24139 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry who are required to install vehicle security systems. People credited with this unit standard are able to install an aftermarket vehicle or machine body control security system.
Standard-setting body:
Demonstrate knowledge of the principles of motorcycle electronic control system operation and repair
This standard has expired and is no longer available.
Version 2
24140 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle and automotive electrical repair industries. People credited with this unit standard are able to demonstrate knowledge of electronic control system application in motorcycles, and motorcycle electronic control system diagnosis and repair.
Standard-setting body:
Demonstrate knowledge of vehicle ABS, TCS, and ESC, and testing for faults in these systems
This standard has expired and is no longer available.
Version 3 This unit standard was replaced by unit standard 31064.
24141 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of vehicle ABS, TCS, and ESC and testing faults in vehicle ABS, TCS, and ESC.
Standard-setting body:
Demonstrate knowledge of testing for and rectifying faults on a motorcycle electronic ignition system
This standard has expired and is no longer available.
Version 2
24144 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of testing for and rectifying faults on a motorcycle electronic ignition system.
Standard-setting body:
Inspect components, test equipment for condition, and rectify equipment faults in battery powered forklifts
Version 2
24147 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: inspect components and test battery powered equipment for condition; and rectify equipment faults in battery powered forklifts.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive oscilloscopes
Version 2
24151 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: oscilloscope types, operation, and terminology; automotive oscilloscope features; and automotive oscilloscope display interpretations.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out diagnostic procedures using an automotive scan tool
Version 1
30873 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out diagnostic procedures using an automotive scan tool.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out automotive diagnostic procedures using an oscilloscope
Version 1
30874 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out automotive diagnostic procedures using an oscilloscope.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in hybrid electric and battery electric vehicle or machine high voltage systems
Version 2
30875 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and rectify faults in hybrid electric vehicle (HEV) and battery electric vehicle (BEV) or machine high voltage systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in vehicle or machine charging and starting systems
Version 1 This unit standard replaced unit standard 897.
30876 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and rectify faults in a vehicle or machine charging and starting system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service multiple automotive batteries
Version 1
30877 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to service multiple automotive batteries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service traction batteries
Version 2
30878 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to service traction batteries.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hybrid electric and battery electric vehicle or machine systems and safety
This standard has expired and is no longer available.
Version 3 This unit standard was replaced by unit standard 31807 and unit standard 31808.
30879 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe hybrid electric vehicle (HEV) and battery electric vehicle (BEV) systems or machine systems; demonstrate knowledge of safety while working on or around HEV and BEV high voltage systems; and describe the replacement of a high voltage battery or battery bank.
Standard-setting body:
Describe automotive scan tools and oscilloscopes
Version 1
30881 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe automotive scan tools and oscilloscopes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair steering and suspension system faults
Version 2
31047 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair steering and suspension system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair engine management system faults
Version 1 This unit standard replaced unit standard 24091.
31048 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in an engine management system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair automotive emission control system faults
Version 1 This unit standard replaced unit standard 893.
31049 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair automotive emission control system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair a Supplemental Restraint System fault
Version 1
31052 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair a Supplemental Restraint Systems (SRS) fault.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair automotive body electrical and electronic system faults
Version 1 This unit standard replaced unit standard 24120.
31053 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair automotive body electrical and electronic system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair vehicle electronic braking system faults
Version 1 This unit standard replaced unit standard 24142.
31055 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair vehicle electronic braking system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of engine management system fault diagnosis
Version 1 This unit standard replaced unit standard 24090.
31056 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of engine management system fault diagnosis.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive body electrical and electronic systems
Version 1 This unit standard replaced unit standard 16114, unit standard 24121, unit standard 24122 and unit standard 24123.
31062 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: accessory motors and electrical circuits; automotive gauges and instruments; automotive body electronic systems; and the diagnosis and calibration of automotive body electronic systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe the operation of vehicle electronic braking systems
Version 1 This unit standard replaced unit standard 24141.
31064 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the operation of vehicle electronic braking systems and system diagnosis.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of electronically controlled steering and suspension systems, and system fault diagnosis
Version 1 This unit standard replaced unit standard 24119.
31066 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of electronically controlled steering and suspension systems and diagnosing system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Manufacture and install an automotive wiring harness
Version 1 This unit standard replaced unit standard 975.
31126 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to manufacture and install an automotive wiring harness.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Depower and reinitialise electric vehicles
Version 1
31416 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to depower and reinitialise electric vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Prepare to work safely on or around hybrid electric vehicle and battery electric vehicle or machine high voltage systems
Version 1
31806 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for new entrants to the electric vehicle industry to ensure they can safely prepare a vehicle for servicing requirements. People credited with this unit standard are able to prepare to safely work on or around hybrid electric vehicle (HEV) and battery electric vehicle (BEV) or machine high voltage systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of hybrid and battery electric vehicle or machine high voltage systems operation and safety
Version 1 This unit standard and unit standard 31808 replaced unit standard 30879.
31807 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe operation of hybrid electric vehicle (HEV) and battery electric vehicle (BEV) or machine high voltage systems; and demonstrate knowledge of safety while working on or around HEV and BEV high voltage systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe hybrid and battery electric vehicle or machine high voltage system fault diagnosis and rectification methods
Version 1 This unit standard and unit standard 31807 replaced unit standard 30879.
31808 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe hybrid and battery electric vehicle or machine high voltage system fault diagnosis and rectification methods.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe remotely operated outdoor power equipment systems
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2 This unit standard was replaced by skill standard 40479.
31893 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe remotely operated outdoor power equipment systems.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe diagnosis and calibration of advanced driver assistance systems
Version 1
31997 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe diagnosis and calibration of advanced driver assistance systems (ADAS).
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in heavy vehicle and/or machine electrical starting and charging systems
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24125 and unit standard 24126.
3396 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of starter and alternator test procedures; diagnose and rectify faults in heavy vehicle and/or machine 12 and 24 volt charging systems; and diagnose and rectify faults in heavy vehicle and/or machine 12 and 24 volt starting systems.
Standard-setting body:
Demonstrate knowledge of vehicle lighting and rectify lighting circuit faults
This standard has expired and is no longer available.
Version 5 This unit standard has been replaced by unit standard 24127 and unit standard 24128.
3399 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical repair industry. People credited with this unit standard are able to: demonstrate knowledge of vehicle lamp application; demonstrate knowledge of vehicle lighting regulations; demonstrate knowledge of vehicle interior light requirements; demonstrate knowledge of vehicle light circuitry; adjust vehicle headlights to comply with Traffic Regulations; and diagnose and rectify vehicle and machine light circuit faults.
Standard-setting body:
Determine the testing requirements of portable generators
Version 1
40473 Skill Standard 2 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test portable generators
Version 1
40474 Skill Standard 2 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Define remotely operated outdoor power equipment systems
Version 1
40479 Skill Standard 4 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of electrical and electronic systems for marine use
Version 4
5433 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: marine electrical and electronic systems; marine battery and voltage supply requirements; marine accessory wiring systems; and lighting and navigation systems on powered boats and yachts.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in a marine charging and starting system
Version 4
5436 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: diagnose and repair faults in a marine charging system; diagnose and repair faults in a marine starting system; and overhaul a marine starter motor.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test and repair automotive alternator circuits
This standard has expired and is no longer available.
Version 5 This unit standard and unit standard 889 have been replaced by unit standard 24654.
5457 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to test an alternator circuit, and repair faults in alternator units and circuits.
Standard-setting body:
Demonstrate knowledge of heavy duty starter motor operation
Version 4
5458 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of: axial and co-axial-type starter motors; sliding gear-type starter motors; and reduction-type heavy duty starter motors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive electronic ignition system operation
Version 4
5462 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: electronic ignition triggering; electronic dwell angle control; distributorless electronic ignition systems; and explain high tension (HT) circuitry specifications in an electronic ignition system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Explain the operation and repair requirements of automotive electronic control systems
This standard has expired and is no longer available.
Version 6 This unit standard and unit standard 2348 have been replaced by unit standard 24119, unit standard 24121, unit standard 24122, unit standard 24123 and unit standard 24124.
5463 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This theory based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: electronic control system application in vehicles and machines; and of control system diagnosis and repair.
Standard-setting body:
Diagnose and rectify faults in automotive electronically controlled systems
This standard has expired and is no longer available.
Version 7 This unit standard and unit standard 2348 have been replaced by unit standard 24120.
8182 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to diagnose and rectify faults in automotive electronically controlled systems.
Standard-setting body:
Diagnose and repair automotive wiper system faults
This standard has expired and is no longer available.
Version 6
887 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of windscreen wiper systems; demonstrate knowledge of headlamp cleaning systems; test the wiper system for correct operation; and repair wiper system faults.
Standard-setting body:
Diagnose and rectify faults in motorcycle or ATV electrical starting and charging systems, and overhaul starter motors
Version 5
890 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to: diagnose and rectify faults in a motorcycle or ATV charging system; diagnose and rectify faults in a motorcycle or ATV starting system; and overhaul a motorcycle or ATV starter motor.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in a contact breaker (CB) ignition system on an engine
This standard has expired and is no longer available.
Version 5
891 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to: diagnose faults in a CB ignition system on an engine; test CB ignition system components for faults; and rectify faults in a CB ignition system on an engine.
Standard-setting body:
Diagnose and rectify faults in a conventional-type electronic ignition system on an engine
This standard has expired and is no longer available.
Version 5
895 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to: diagnose faults in an electronic ignition system on an engine; test electronic ignition system components for faults; and rectify faults in an electronic ignition system on an engine.
Standard-setting body:
Diagnose and rectify faults in light vehicle starting and charging systems
This standard has expired and is no longer available.
Version 5 This unit standard was replaced by unit standard 30876.
897 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to diagnose and rectify faults in a charging system on a light vehicle, and diagnose and rectify faults in a starting system on a light vehicle.
Standard-setting body:
Overhaul heavy duty electric pre-engaged and axial-type starter motors
Version 5
905 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive electrical repair industry. People credited with this unit standard are able to: test and inspect heavy duty electric pre-engaged and axial-type starter motors; rectify faults in starter motors; and assemble and test starter motors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Install entertainment systems in vehicles and test and rectify installation faults
Version 5
907 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: procure an entertainment system for installation; install the entertainment system in the vehicle; test the entertainment system and its circuits for faults; rectify entertainment system installation faults; and locate and rectify causes of radio frequency interference (RFI).
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in automotive instruments and gauges
This standard has expired and is no longer available.
Version 6 This unit standard has been replaced by unit standard 24113 and unit standard 24114.
910 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical repair industry. People credited with this unit standard are able to: demonstrate knowledge of analogue and digital instruments and gauges; test a gauge and instrument panel and associated circuits and sensors for faults; and rectify gauge and instrument panel faults.
Standard-setting body:
Diagnose and rectify faults in engine management systems
This standard has expired and is no longer available.
Version 6 This unit standard, unit standard 892, and unit standard 5460 were replaced by unit standard 24090 and unit standard 24091.
961 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive industry. People credited with this unit standard are able to: demonstrate knowledge of engine management system functions; diagnose engine management problems; and rectify faults in an engine management system.
Standard-setting body:
Design a wiring harness for a particular automotive application
This standard has expired and is no longer available.
Version 6 This unit standard was replaced by unit standard 31126.
975 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive electrical repair industry. People credited with this unit standard are able to produce a specification for a vehicle wiring harness for a given application, and produce a wiring circuit diagram for the installation.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify faults in an engine flywheel ignition system
This standard has expired and is no longer available.
Version 7
979 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in outdoor power equipment and motorcycle engineering industries. People credited with this unit standard are able to: demonstrate knowledge of capacitor discharge ignition systems (CDI) on small engines and motorcycles; demonstrate knowledge of a transistorised magneto ignition system; test flywheel magneto ignition systems and their components for faults; and rectify faults on a flywheel ignition system.
Standard-setting body:
Level 5
Describe and analyse hybrid electric vehicle technology, and service requirements
Version 2
21089 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe HEV systems and components; describe and analyse technology design and operational challenges for HEVs; and describe and analyse service requirements for HEVs.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive multiplex and databus applications, and diagnose faults
This standard has expired and is no longer available.
Version 2
21090 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to identify and distinguish automotive multiplex and databus applications, and diagnose faults in multiplex wiring systems.
Standard-setting body:
Demonstrate knowledge of in-vehicle information and control systems
This standard has expired and is no longer available.
Version 2
21091 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of in-vehicle information and control systems.
Standard-setting body:
Demonstrate knowledge of complex automotive wiring diagrams and circuitry
Version 2
21092 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of types and features of complex automotive wiring diagrams; and complex automotive wiring diagrams and circuitry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of, and use, portable computer diagnostic equipment to test vehicle systems
Version 2
21093 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the use of portable computer diagnostic equipment; and use portable computer diagnostic equipment to test vehicle systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe removal and installation of body components in terms of electronic integrity of vehicles
This standard has expired and is no longer available.
Version 2
21094 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of electronic integration with vehicle body components, and the removal and installation of body components in terms of electronic integrity of vehicles.
Standard-setting body:
Test and rectify faults in vehicle ABS, TCS, or ESC electronic control systems
This standard has expired and is no longer available.
Version 2 This unit standard was replaced by unit standard 31055.
24142 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to test anti-lock braking systems (ABS), traction control systems (TCS), or electronic stability control (ESC) electronic control systems in vehicles; and rectify ABS, TCS, or ESC electronic control system faults.
Standard-setting body:
Diagnose and repair traction motor system faults in electric vehicles
Version 1
31417 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in traction motor systems in electric vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose faults and replace an auxiliary motor in an electric vehicle
Version 2
31418 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose faults in and replace an auxiliary motor in an electric vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair safety interlock systems faults in electric vehicles
Version 1
31419 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in safety interlock systems in electric vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair cooling system faults in electric vehicles
Version 2
31420 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair cooling system faults in electric vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair DC to DC system faults in electric vehicles
Version 1
31421 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair DC to DC system faults in electric vehicles.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex faults in vehicle or machine high voltage systems and reflect on diagnostic procedures
Version 1
33118 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain high voltage system operation to enable complex fault diagnosis; diagnose the cause of complex faults in a vehicle or machine high voltage system; and reflect on learning experience in response to diagnosing complex faults in a vehicle or machine high voltage system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex faults in vehicle or machine accessory systems and reflect on diagnostic procedures
Version 1
33119 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain vehicle or machine accessory system operation to enable complex fault diagnosis; diagnose the cause of complex faults in a vehicle or machine accessory system; and reflect on learning experiences in response to diagnosing complex faults in an accessory system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Design and build vehicle or machine complex electrical systems containing electronics and reflect on build procedures
Version 1
33120 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain the function and operation of vehicle or machine complex electrical systems containing electronics; design and build vehicle or machine complex electrical systems containing electronics; and reflect on learning experience in response to building vehicle or machine complex electrical systems containing electronics.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex faults in heavy vehicle or machine EMSs and reflect on diagnostic procedures
Version 1
33121 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain heavy vehicle or machine engine management system (EMS) operation to enable complex fault diagnosis; diagnose the cause of complex faults in a heavy vehicle or machine EMS; and reflect on learning experience in response to diagnosing complex faults in a heavy vehicle or machine EMS.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex faults in light vehicle engine management systems and reflect on diagnostic procedures
Version 1
33128 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain light vehicle engine management system operation to enable complex fault diagnosis; diagnose the cause of complex faults in a light vehicle engine management system; and reflect on learning experience in response to diagnosing complex faults in a light vehicle engine management system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex faults in vehicle or machine body control systems and reflect on diagnostic procedures
Version 1
33129 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain body control system operation to enable system complex fault diagnosis; diagnose the cause of complex faults in a body control system; and reflect on learning experience in response to diagnosing complex faults in a body control system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex faults in vehicle or machine braking, steering and suspension systems and reflect on procedures
Version 1
33130 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: explain braking, steering and suspension system operation to enable complex fault diagnosis; diagnose the cause of complex faults in braking steering, and suspension systems; and reflect on learning experience in response to diagnosing complex faults in braking, steering and suspension systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Make up and install electronic circuitry and components in a vehicle or machine
Version 5
966 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of the component to be installed in the electrical system of a vehicle or machine; plan the vehicle or machine''s electrical circuitry to install the component; and make up and install the circuitry.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Specify the lighting requirements for a passenger coach or special purpose vehicle
Version 5
976 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive electrical and coachbuilding industries. People credited with this unit standard are able to: determine lighting requirements and legal limitations for a passenger coach or special purpose vehicle; determine types and number of lighting units, and their positioning on the vehicle; determine circuit protection for the lighting; and prepare lighting specification.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Specify the battery and charging system requirements for a passenger coach or special purpose vehicle
This standard has expired and is no longer available.
Version 5
978 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive electrical and coachbuilding industries. People credited with this unit standard are able to determine passenger coach or special purpose vehicle starting and electrical loading requirements, and prepare a battery and charging system specification.
Standard-setting body:
Data as at 2025-05-01 23:01:07.45