- Home
- Qualifications and standards
- NCEA
-
M?ori and Pasifika
- Field M?ori Assessment Support Materials
- Field M?ori programme development support
- M?tauranga M?ori qualifications and assessment standards
- Te Hono o Te Kahurangi quality assurance
- M?ori providers
- Te K?kiritanga 2020-2023
- M?ori and the Future State
- Pasifika
- Ng? Kete M?tauranga
- Equity in STEM Symposium
-
Providers and partners
- About education organisations
- NZQA's quality assurance system for tertiary education organisations
- Guidelines and forms
- Quick links to NZQF documents
- Consistency of graduate outcomes
- Approval, accreditation and registration
- Monitoring and Assessment
- Self-assessment
- External evaluation and review
- Assessment and moderation of standards
- Submitting results and awarding qualifications and micro-credentials
- Interim domestic Code of Practice (current)
- International Code of Practice (current)
- Tertiary and International Learners Code of Practice
- Offshore use of qualifications and programmes
- Assessment and moderation
- registration-and-accreditation
- caring-for-international-students
- Reform of Vocational Education
- International Education planning
- International
- About us
Domain - Furniture and Cabinet Making
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Manufacturing > Furniture > Furniture and Cabinet Making
| 0 Qualifications | 85 Assessment Standards (85 Units) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Construct free-hand drawings for use in furniture making
Version 4
14995 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: establish job requirements and select and prepare equipment for free-hand furniture drawings; construct free-hand drawings for use in furniture making; and store drawings and equipment.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Demonstrate knowledge of and use adhesives in furniture making
Version 4
16230 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of adhesives; demonstrate and apply knowledge of preparing to use adhesives; and use adhesives, in furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Use basic portable power tools for furniture making
Version 5
16232 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to use; and use, basic portable power tools for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a basic planing machine to produce simple wooden furniture components
Version 2 This unit standard and unit standard 18908 replaced unit standard 2219.
18909 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this standard are able to: establish job requirements for furniture making; prepare a basic planing machine for operation for furniture making; and perform planing operations for furniture making. They are responsible for their own work quality and work under supervision.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Use fixing hardware in furniture making
Version 3
18915 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to use; and use, fixing hardware in furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Construct hand joints for furniture
Version 3
18917 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to construct; and construct, hand joints for furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Construct a furniture carcase
Version 3
18918 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to construct; and construct, a furniture carcase.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Hand turn wood to produce furniture articles
Version 4
20047 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: describe the wood lathe and turning tools used to produce furniture articles; demonstrate and apply knowledge of preparing to hand turn wood to produce furniture articles; and hand turn wood to produce furniture articles.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Prepare, use and maintain hand tools for furniture making
Version 5
2199 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to use; and use and maintain hand tools, for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Interpret and confirm furniture job specifications
Version 5
2216 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: interpret job specifications for furniture making; and confirm job specifications and simple drawings for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a single boring machine to bore holes in furniture components
Version 5
2220 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to bore holes; set a single boring machine to bore holes; and perform boring operations, in furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble non-show wood dining chair seat frames
Version 2 This unit standard and unit standard 25533 replaced unit standard 2198.
25532 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble non-show wood dining chair seat frames; and assemble non-show wood dining chair seat frames.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a bandsaw to produce furniture components
Version 2 This unit standard and unit standard 25537 replaced unit standard 9788.
25536 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to operate, and operating, a bandsaw to produce furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a straight cutting saw to cut square profiled furniture components
Version 2 This unit standard and unit standard 25551 replaced unit standard 18904.
25550 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to operate a straight cutting saw; and operate a straight cutting saw to cut square profiled components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a dimension saw to produce square profiled furniture components
Version 2 This unit standard and unit standard 25550 replaced unit standard 18904.
25551 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to operate a dimension saw; and operate a dimension saw to produce square profiled components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a flat bed sander to sand wooden furniture components
Version 5
9785 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set and operate; and set and operate, a flat bed sander to sand wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a sanding machine to sand shaped furniture components
Version 5
9786 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to sand shaped furniture components; demonstrate and apply knowledge of preparing a sanding machine to sand shaped furniture components; and sand shaped furniture components using a sanding machine.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Level 3
Construct working drawings for use in furniture making
Version 6
14996 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to construct, and construct, working drawings for use in furniture making; and store working drawings and equipment.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Construct perspective drawings for use in furniture making
Version 7
14997 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to construct, and construct, perspective drawings for use in furniture making; and store drawings and equipment.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Construct isometric and oblique drawings for use in furniture making
Version 7
14998 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to construct, and construct, isometric and oblique drawings for use in furniture making; and store isometric and oblique drawings and equipment for use in furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Calculate lengths, areas, and costs and percentages of waste for furniture making
Version 5
16231 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to calculate lengths, areas, and costs and percentages of waste for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Edge joint materials used in furniture making to make a flat panel
Version 5
18897 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to edge joint; and edge joint, materials used in furniture making to make a flat panel.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Make wood machining jigs for sawing, boring, sanding, and planing machines
Version 3 This unit standard, unit standard 18901, and unit standard 18902 replaced unit standard 2249.
18900 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to make wood machining jigs; and make, wood machining jigs.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a straight cutting saw to cut furniture components
Version 3 This unit standard and unit standard 18904 replaced unit standard 9787.
18903 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set a straight cutting saw, to cut furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a manual feed edge-banding machine to edge furniture panels
Version 4 This unit standard replaced unit standard 9800 and unit standard 9805.
18907 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to set and operate a manual feed edge-banding machine, setting a manual feed edge-banding machine, and operating a manual feed edge-banding machine, to edge furniture panels.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Template and construct an assembly jig for wooden furniture
Version 6
2201 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to template and construct an assembly jig for wooden furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a wide belt sanding machine to sand wooden furniture components
Version 7
2224 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to operate; and operate, a wide belt sanding machine to sand wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a four sider to produce wooden furniture components
Version 7
2226 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to operate a four sider; and demonstrate and apply knowledge of operating a four sider, to produce wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a Computer Numerical Controlled machine to produce wooden components
Version 5
2229 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to operate; and operating, a Computer Numerical Controlled (CNC) machine, to produce wooden components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a multi-borer to bore furniture components
Version 5
2236 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to operate; and operating, a multi-borer to bore furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble non-show wood frames
Version 2 This unit standard and unit standard 25532 replaced unit standard 2198.
25533 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to assemble, and assemble, non-show wood frames.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a bandsaw to cut furniture components
Version 3 This unit standard and unit standard 25536 replaced unit standard 9788.
25537 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to set; and set, a bandsaw to cut furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a round-ended tenoner to tenon wooden furniture components
Version 3 This unit standard and unit standard 25539 replaced unit standard 9793.
25538 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to operate, and operate, a round ended tenoner to tenon wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a slot mortiser to mortise wooden furniture components
Version 3 This unit standard and unit standard 25538 replaced unit standard 9793.
25539 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to operate, and operate, a slot mortiser to mortise wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a surface planer to bevel, rebate, and taper wooden furniture components
Version 5 This unit standard and unit standard 25553 replaced unit standard 18908.
25552 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to set and operate a surface planer; and demonstrate and apply knowledge of setting, and operating, a surface planer to bevel, rebate, and taper wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a thicknesser to splay and taper wooden furniture components
Version 4 This unit standard and unit standard 25552 replaced unit standard 18908.
25553 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to set and operate a thicknesser; and demonstrate and apply knowledge of setting and operating a thicknesser to splay and taper wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble framed doors for use in furniture
Version 2
25554 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble; and assemble, framed doors for use in furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble a manufactured board storage unit
Version 3
25555 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble; and assemble, a manufactured board storage unit.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble and fit drawers to a carcass using manufactured runners
Version 3
25556 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to assemble and fit; and assemble and fit, drawers to a carcass using manufactured runners.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble and fit traditional drawers to a cabinet using wooden runners
Version 3
25557 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble and fit; and assemble and fit, traditional drawers to a cabinet using wooden runners.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble solid wood show wood shelving units
Version 3
25559 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble; and assemble, solid wood show wood shelving units.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble show wood chairs
Version 2
25560 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble; and assemble, show wood chairs.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble a show wood table
Version 2
25561 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to assemble; and assemble, a show wood table.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Fit doors to a cabinet using adjustable hinges
Version 3
25562 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to fit; and fit, doors to a cabinet using adjustable hinges.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Fit doors to a cabinet using non-adjustable hinges
Version 4
25563 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to fit; and fit, doors to a cabinet, using non-adjustable hinges.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a Computer Numerical Controlled beamsaw
Version 2
25564 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to operate; and operating a Computer Numerical Controlled (CNC) beamsaw.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a dimension saw to cut furniture components
Version 2
25566 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to set and operate a dimension saw; setting a dimension saw for cutting furniture components; and operating a dimension saw to cut angles, bevels, rebates, trenching or grooving.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Produce a cutting list and calculate material quantities for an item of furniture
Version 2 This unit standard and unit standard 28735 replaced unit standard 25546 and unit standard 25547.
28733 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: produce a cutting list; and calculate material quantities from a cutting list for an item of furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a portable router to produce furniture components
Version 2
28734 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to use a portable router for furniture making; prepare materials for furniture making using a portable router; and use a portable router in furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate a triple borer machine to bore furniture components
Version 5
9784 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set and operate a triple borer machine; set a triple borer machine to bore furniture components; and demonstrate and apply knowledge of operating a triple borer machine, to bore furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a spindle moulder to produce wooden furniture components
Version 5
9789 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to operate a spindle moulder; prepare materials for furniture making using a spindle moulder; and demonstrate and apply knowledge of operating a spindle moulder to produce wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate an overhead router to shape furniture components
Version 6
9790 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to operate an overhead router; and operating an overhead router, to shape furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate an automatic wood-turning lathe to turn wooden furniture components
Version 5
9791 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to operate; and operating an automatic lathe, to turn wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Operate a dovetailing machine to dovetail wooden drawers
Version 5
9792 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to operate, and operate a dovetailing machine, to dovetail wooden drawers.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Level 4
Program, set and operate a computer-controlled edge-bander
Version 3 This unit standard replaced unit standard 18892.
18891 Unit Standard 9 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; program and set; and operate a computer-controlled edge-bander.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set and operate an automatic feed edge-banding machine to edge panels for furniture making
Version 4
18893 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; set; and operate an automatic feed edge-banding machine to edge panels for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Program and set a Computer Numerical Controlled beam saw
Version 3
18895 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to set; and programming and setting a Computer Numerical Controlled (CNC) beam saw.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Manufacture laminated, shaped furniture components
Version 4 This unit standard and unit standard 18897 replaced unit standard 2230.
18896 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard covers the knowledge and skills required to adhere wood, wood substitutes, and/or surface coating material to form solid shaped laminated furniture components of a specified thickness. People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to manufacture laminated, shaped furniture components; press and laminate shaped furniture components; and demonstrate and apply knowledge of finishing off laminated, shaped furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a four sider to square dress wooden furniture components
Version 3 This unit standard and unit standard 18899 replaced unit standard 2233.
18898 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set a four sider, to square dress wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a four sider to produce moulded profile wooden furniture components
Version 4 This unit standard and unit standard 18898 replaced unit standard 2233.
18899 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set, a four sider, to produce moulded profile wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Make a machining jig for a spindle moulder or overhead router to machine wooden furniture components
Version 4 This unit standard, unit standard 18900, and unit standard 18902 replaced unit standard 2249.
18901 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to make a machining jig for a spindle moulder or overhead router; and make, a machining jig for a spindle moulder or overhead router, to machine wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Make a former to press and laminate curved furniture components
Version 4
18911 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to make a former; and make a former, to press and laminate curved furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Manufacture a one-off furniture article
Version 4
18914 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: produce a cutting list and calculate required materials; manufacture furniture components for a one-off article of furniture; and assemble a one-off article of furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Attach accessories to furniture
Version 5
2202 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to attach; and attaching, accessories to furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Repair wooden furniture ready for finishing
Version 5
2203 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: repairing a gouged surface requiring inlay; replacing a broken or worn out component; repairing a broken or cracked component; and fixing a loose joint, in wooden furniture, ready for finishing.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Repair antique wooden furniture in preparation for finishing
Version 5
2205 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to repair antique wooden furniture; prepare antique wooden furniture for repair; conduct structural repairs to antique wooden furniture; and conduct surface repairs to antique wooden furniture in preparation for finishing.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a wide belt sander to sand wooden furniture components
Version 7
2231 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to set a wide belt sander; and set a wide belt sander to sand wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Match, join, and press veneer overlay for furniture making
Version 6
2241 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to match, join, and press veneer overlay; mark out and match veneer; cut and joint veneer sheets; and attach veneer to a suitable substrate, for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a multi-boring machine to bore furniture components
Version 6
2244 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to set; and setting, a multi-boring machine to bore furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a Computer Numerical Controlled machine centre
Version 5
2250 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of: preparing to set; and setting, a Computer Numerical Controlled (CNC) machine centre.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Use CAM software to develop and test a program for a CNC machine to produce furniture components
Version 2 This unit standard replaced unit standard 2251.
25534 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited this unit standard are able to: use CAM software to develop a program for a CNC machine to produce furniture components; and test run a program for a CNC machine.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Use Computer Aided Design software to generate component drawings
Version 2 This unit standard replaced unit standard 2253.
25535 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to use Computer Aided Design (CAD) software to generate component drawings.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a spindle moulder to profile wooden furniture components
Version 3 This unit standard and unit standard 25541 replaced unit standard 9794.
25540 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate and apply knowledge of preparing to set a spindle moulder to shape and profile wooden furniture components; set a spindle moulder with cutter-head, jig, and copy collar to shape wooden furniture components; and set a spindle moulder with saw blade, jig, and jig guide to groove shaped wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a spindle moulder for straight fence work in furniture making
Version 3 This unit standard and unit standard 25540 replaced unit standard 9794.
25541 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard will be able to: demonstrate and apply knowledge of preparing to set a spindle moulder for straight fence work in furniture making; set a spindle moulder with cutter-head and straight fences to machine wooden furniture components; set a spindle moulder with saw blade and straight fences to machine wooden furniture components; and set a spindle moulder to machine stop cuts for furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set an overhead router with cutter and fence, and with cutter and guide pin, to shape wooden furniture components
Version 3 This unit standard and unit standard 25543 replaced unit standard 9795.
25542 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set an overhead router with cutter and fence, and cutter and guide pin; set an overhead router with cutter and fence to profile wooden furniture components; and set an overhead router with cutter, guide pin, and jig to shape wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a round-ended tenoner to tenon wooden furniture components
Version 4 This unit standard and unit standard 25545 replaced unit standard 9798.
25544 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set, a round-ended tenoner to tenon wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a slot mortiser to mortise wooden furniture components
Version 4 This unit standard and unit standard 25544 replaced unit standard 9798.
25545 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set, a slot mortiser, to mortise wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Make a vacuum holding jig for a Computer Numerical Controlled machine used in furniture making
Version 3 This unit standard and unit standard 25549 replaced unit standard 18902.
25548 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to make a vacuum holding jig; and make a vacuum holding jig, for a Computer Numerical Controlled (CNC) machine used in furniture making.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Assemble an extension table
Version 2
25558 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to assemble; and assemble, an extension table.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Install customised furniture on-site
Version 2
25565 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
This unit standard is designed for people working in a furniture making operation who are required to install furniture on-site. People credited with this unit standard are able to: prepare to install; and install, customised furniture units on-site; install overhead wall-mounted furniture units on-site; clean up after site installation; and provide a debrief of site installation.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Carry out a pre-installation site check for furniture installation
Version 3
25768 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to; and carry out, a pre-installation site check for furniture installation.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Produce cutting lists and calculate material quantities for a furniture unit
Version 2 This unit standard and unit standard 28733 replaced unit standard 25546 and unit standard 25547.
28735 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: produce cutting lists; and calculate material quantities for a furniture unit from cutting lists.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set an automatic wood turning lathe to turn wooden furniture components
Version 5
9796 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set, an automatic lathe to turn wooden furniture components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Set a dovetailing machine to dovetail wooden drawer components
Version 5
9797 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate and apply knowledge of preparing to set; and set, a dovetailing machine, to dovetail wooden drawer components.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Level 5
Manufacture prototype furniture
Version 5
2204 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to prepare to manufacture, and create and assemble components for, prototype furniture.
Consent & Moderation Requirements:
CMR 173
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Competenz
Data as at 21 January 2022